Watts 1/8 in. Angle Connection Brass Steam Air Vent
31.99 USD
Browse the detailed sheet with complete information, compare prices and identify the features of Watts 1/8 in. Angle Connection Brass Steam Air Vent, offered at the cost of 31.99 USD; it classifies in the Indoor Climate Accessories category; the sale is managed by Watts 1/8 in. Angle Connection Brass Steam Air Vent and the production is handled by Watts.
Series SV non-vacuum non-adjustable float-type steam air vents are used in steam heating applications to vent air in one-pipe steam systems. They feature a brass body with an angle connection and a brass float. Series SV provides venting and is ideal for radiators, convectors and steam mains. Maximum pressure 10 PSI (68.9kPa).
EAN: 0098268543506
Shipping Cost: -1 USD
Availability: in stock
Condition: new
Series SV non-vacuum non-adjustable float-type steam air vents are used in steam heating applications to vent air in one-pipe steam systems. They feature a brass body with an angle connection and a brass float. Series SV provides venting and is ideal for radiators, convectors and steam mains. Maximum pressure 10 PSI (68.9kPa).
EAN: 0098268543506
Shipping Cost: -1 USD
Availability: in stock
Condition: new
Compare Similar Products
Watts 1/8 in. Angle Connection Brass Steam Air Vent
29.99 USD
Series SVA non-vacuum adjustable float-type steam air vents are used in steam heating applications to vent air in steam systems. They feature a brass body with an angle connection and a brass float. Series SVA provides rapid venting and is ideal for radiators, convectors and steam mains. Maximum pressure 10 PSI(68.9kPa)
Watts 1/4 in. Straight Connection Brass Steam Air Vent
29.99 USD
Series SVS non-vacuum non-adjustable float-type steam air vents are used in steam heating applications to vent air in steam systems. They feature a brass body with a straight connection and a brass float. Series SVS provides rapid air venting and is ideal for radiators, convectors and steam mains. Maximum pressure 10 PSI (68.9kPa).
SharkBite 1/2 in. PTC X 3/8 in. Compression Brass Dual Outlet Angle Stop
25.99 USD
SharkBite Max dual outlet angle stops are typically used on stub-outs coming out of the wall and used to control and shut-off water flow to fixtures and appliances for maintenance and repair.
SharkBite 1/2 in. Compression X 3/8 in. Compression Brass Angle Stop Valve
44.99 USD
SharkBite 1/2 in. X 3/8 in. Compression Angle Stop ValveWe use high-quality DZR Lead-Free Brass for our 1/2 in. x 3/8 in. Quarter Turn Angle Stop Ball Valve. Used where a water pipe enters a room allowing easy water shut off for maintenance, repair, installing a toilet pipe valve or faucet to your water system with no need to turn off your main supply valve. Our product works with your existing plumbing, is easy to disassemble for changing fittings and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
Watts 1/8 in. Straight Connection Brass Automatic Vent Valve
25.99 USD
Series FV-4 automatic vent valves are used in commercial and residential hydronic heating applications to provide automatic air venting for hot or cold water distribution systems. It consists of a brass body construction with male NPT connection, brass cover, air vent with silicone rubber seal, polyethylene float with valve plug and automatic vent. Series FV-4M1 has a high temperature rating and is ideal for use with glycol systems or for use as an anti-vacuum device. It can also be installed to permit the separation and dispersal of air while fluid is circulating in the system. Can be disassembled for inspection and cleaning.
Watts 3/4 in. MNPT Brass Calibrated Pressure Relief Valve 3/4 in. FNPT 1 pc
127.99 USD
This 3/4 inch lead free calibrated pressure relief valve is designed for use only as protection from the build up of excessive pressure in systems containing water, oil or air. It features a lead free brass body with 3/4 inch NPT male inlet and 1/2 inch NPT female (drain) outlet, stainless steel spring, lead free brass bonnet and a Buna-N disc and O-ring.
Swarovski Optik 8x42 NL Pure Roof Prism Binocular, 9.1 Deg Angle of View, Green
2949 USD
From the moment you hold the 8x42 NL Pure Waterproof Roof Prism Binocular, you'll experience an unprecedented connection with nature. This revolutionary binocular offers the largest field of view to date, with barely perceptible edges, ensuring you never miss a detail. Its compact size and ergonomic design make it a joy to handle, allowing you to immerse yourself in your surroundings, even in the late hours of the night.The NL Pure 8x42 is equipped with an 8x magnification that provides an outstanding field of view, revealing more details than ever before. Its SWAROVISION technology, featuring Field Flattener lenses and fluoride-containing HD lenses, delivers razor-sharp images right to the periphery, minimizes color fringing, and enhances color fidelity. This makes it an ideal choice for eyeglass wearers who can fully enjoy the benefit of the large field of view.This binocular also boasts a unique two-eyepiece module that utilizes the visual power of both eyes for an intense viewing experience. The image appears extraordinarily vivid, reflecting natural vision and allowing you to observe nature with maximum concentration.The NL Pure 8x42 is also equipped with innovative features like the Automatic Holding Point, which displays the correct aiming point considering distance, air pressure, temperature, and angle. The Ballistic Turret Flex (BTF) can be configured separately, enabling you to stay on target at the desired distances. The FLEXCHANGE 4A-IF reticle, specially developed for driven hunting, can be switched on and off with the press of a button.The binocular's design is not just about aesthetics but also about functionality. The rotating strap connector adapts perfectly to any movement and can be quickly and silently fitted to your binoculars. The quick catch button allows you to adjust the strap within seconds to the length that feels most comfortable in the field. The new objective lens and eyepiece covers provide your binoculars with the best protection against external impacts.The NL Pure 8x42 also comes with a functional sidebag for easy storage and quick access, a universal comfort strap for fatigue-free usage, and a soap & brush kit for maintaining the longevity of the product. Experience the best of optics packed in the smallest possible size with the 8x42 NL Pure Waterproof Roof Prism Binocular.
Watts 1/2 in. D X 1/2 in. D Brass Double Check Valve
124.12 USD
Dual Check Valves with Intermediate Atmospheric Vent prevent the reverse flow of hot or cold polluted water from entering into the potable water supply. It consists of a brass body with stainless steel internal parts, integral strainer and two durable, tight-sealing, rubber check valves. Designed for continuous pressure, non-health hazard applications in smaller supply lines, such as laboratory equipment, processing tanks, sterilizers, dairy equipment and specifically for boiler feed lines.
Watts 3/4 in. FNPT Brass Pressure Reducing Valve 3/4 in. Double Union 1 pc
249.99 USD
Series LF25AUB-Z3 lead free water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a lead free copper silicon alloy body construction, union inlet connection, integral stainless steel strainer and high temperature resistant reinforced diaphragm for hot water. The series LF25AUB-Z3 is available with a variety of end connections including threaded, solder, PEX, quick-connect and CPVC with both union and double union connections.
Maid O' Mist 1/8 in. Straight Connection Brass Air Vent
21.99 USD
The no. 67 Auto-Vents are float-operated vents for use on convector radiators, baseboard radiation and radiant panels. These are designed to be used in space that is limited and can be installed in trouble spots previously neglected or improperly vented. No air chamber is required. Auto-Vents are designed for systems with pressures up to 50 lbs.
Pig Hog 18.5' 1/4" to 1/4" Right Angle 8mm Instrument Cable
26.95 USD
Make your audio connections robust and reliable with the Pig Hog 18.5' 1/4" to 1/4" Right Angle 8mm Instrument Cable. Designed with the professional musician and audio enthusiast in mind, this high-quality cable is meticulously engineered to withstand the most demanding tour conditions and rigorous use. Constructed with an extra-thick 8mm wire, this durable instrument cable ensures optimal signal transmission for superior sound quality. The performance-grade connectors provide a secure, noise-free connection, while the tension-resistant stress relief design enhances the cable's longevity and reliability. One of the standout features of this versatile cable is its right-angle design. This thoughtful feature allows for easy connection to musical instruments or audio equipment placed in tight or hard-to-reach areas, making it an ideal choice for professional setups and home studios alike. With the Pig Hog's unwavering commitment to quality, this cable comes with a 'no question' lifetime guarantee, offering peace of mind that it's built to last. So, don't compromise on your sound with substandard cables. Choose the Pig Hog 18.5' 1/4" to 1/4" Right Angle 8mm Instrument Cable for a reliable, high-quality audio connection.
Watts 3/4 in. MNPT Brass Vacuum Breaker 3/4 in. FNPT 1 pk
27.99 USD
Hose connection vacuum breakers permit the attachment of portable hoses to hose thread faucets and prevent the reverse flow of polluted water from entering into the potable water supply.
Vevor Return Air Filter Grille Fits W24 x H18 In Duct Opening Vent Cover Filter Grill
39.99 USD
Return Air Filter Grille Fits W24 x H18 In Duct Opening Vent Cover Filter GrillReturn Air Filter GrilleHow to MeasureEfficient Air ExchangeEasy to Replace and MaintainEasy InstallationMultiple Size OptionsInstallation Opening Dimensions: 23.8 x 17.9 in / 60.5 x 45.5 cm,Installation Opening Thickness: 1.06 in / 2.7 cm,Filter Slot Dimensions: 23.7 x 17.8 x 1.3 in / 60.3 x 45.3 x 3.2 cm,Item Model Number: 1RAF2418-1,Product Dimensions: 26.6 x 20.7 x 1.6 in / 67.6 x 52.5 x 4 cm,Net Weight: 6.94 lbs / 3.15 kg
Vevor Return Air Filter Grille Fits W20 x H25 In Duct Opening Vent Cover Filter Grill
42.99 USD
Return Air Filter Grille Fits W20 x H25 In Duct Opening Vent Cover Filter GrillReturn Air Filter GrilleHow to MeasureEfficient Air ExchangeEasy to Replace and MaintainEasy InstallationMultiple Size OptionsInstallation Opening Dimensions: 19.7 x 24.8 in / 50 x 63 cm,Installation Opening Thickness: 1.06 in / 2.7 cm,Filter Slot Dimensions: 19.6 x 24.7 x 1.3 in / 49.8 x 62.8 x 3.2 cm,Item Model Number: 1RAF2025-1,Product Dimensions: 22.6 x 27.6 x 1.6 in / 57.4 x 70.2 x 4 cm,Net Weight: 7.05 lbs / 3.2 kg
Watts 1/2 in. Female Threaded Union Brass Water Pressure Reducing Valve 1/2 in. FNPT 1 pk
189.99 USD
Series LF25AUB-Z3 lead free water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a lead free copper silicon alloy body construction, union inlet connection, integral stainless steel strainer and high temperature resistant reinforced diaphragm for hot water. The series LF25AUB-Z3 is available with a variety of end connections including threaded, solder, PEX, quick-connect and CPVC with both union and double union connections.
Watts 1/2 in. Brass Sweat Ball Valve with Drain Full Port Lever
26.99 USD
Full port ball and waste valve is lead free. The copper silicon alloy ball valves feature a side drain port to drain or vent downstream line when the valve is in the off position. The full port orifice ensures maximum flow capacity and its ball is wiped clean during each operation of the valve.
Keeney 1-1/2 in. D X 8 in. L Brass Branch Tailpiece
22.99 USD
Chrome plated 22 gauge brass branch tailpiece with 3/4in (7/8in OD)branch for connection to rubber hose or 3/4in sweat connection. Direct connect 1 1/2in inlet x 8in long, with brass nut.
Tru-Flate Brass/Steel Air Coupler and Plug Set 1/4 in. Female 19 pc
41.99 USD
Kit contains all accessories needed to connect and use a tank mounted air compressor. Includes couplers plugs for air line hose and air tool connections air line chuck for filling tire valves tire gauge, to check air pressure blowgun kit with multiple. nozzles for general cleaning, drying and clearing ball and tapered inflator nozzles for inflating toys and recreational equipment.
Watts 1/2 in. MIP MIP Brass Vacuum Release Valve
58.37 USD
Water service vacuum relief valves are used in water heater/tank applications to automatically allow air to enter into the piping system to prevent vacuum conditions that could siphon the water from the system and damage water heater/tank equipment. It consists of a lead free brass body construction with NPT male inlet connection and a protective cap. Series LFN36 has a low profile design, is tested and rated to ANSI Z21.22 and is CSA certified. It is suitable for low pressure steam and water service and is ideal for use in domestic water heaters and supply tanks, table top heaters, jacketed steam kettles, unit heaters, low pressure steam systems and steam coil heaters.
Watts 1 in. Brass FIP Union Ball Valve Full Port Lever
79.99 USD
Series LF622UF Lead Free Full Port Union End Ball Valves are designed for steam service applications. They are ideal for throttling and balancing of nonabrasive fluids where minimum flow is 20% to 100% of valve capacity.
Vevor PEX Ball Valve 10 Pieces 1/2 in PEX Brass Ball Valve Full Port Brass Ball Valve
30.99 USD
PEX Ball Valve 10 Pieces 1/2 in PEX Brass Ball Valve Full Port Brass Ball ValveSolid ConstructionClear IdentificationEasy InstallationSmooth FlowWide ApplicationBrass MaterialSwitching Angle: 90°,Color: Brass,Connection Type: PEX,Item Model Number: QF-11,Quantity: 10 PCs (5 Red Handle Ball Valves, 5 Blue Handle Ball Valves),Max Working Pressure: 400 PSI,Product Dimensions: 4.72 x 0.91 x 1.89 in / 120 x 23 x 48 mm,Net Weight: 2.43 lbs / 1.1 kg,Main Material: Lead-Free Brass,Applicable Size: 1/2 in
Watts 3/4 in. Female Solder Union Brass Water Pressure Reducing Valve 3/4 in. Double Union 1 pc
195.02 USD
Series LF25AUB-Z3 lead free water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a lead free copper silicon alloy body construction, union inlet connection, integral stainless steel strainer and high temperature resistant reinforced diaphragm for hot water. The series LF25AUB-Z3 is available with a variety of end connections including threaded, solder, PEX, quick-connect and CPVC with both union and double union connections.
Watts LFMMV 1/2 in. FNPT Brass Mixing Valve 1/2 in. FNPT 1 pk
169.99 USD
This 1/2 inch lead free thermostatic mixing valve is designed for residential, commercial or institutional environments for supplying baths or lavatories with tempered water. It consists of a lead free brass body, threaded union connections, solid wax hydraulic principle thermostat, integral filter washers and check valves with a locking mechanism for the temperature setting. The adjustable field range temperature at mixed outlet is 80 to 120 degrees F (27 to 49 degrees C). The maximum pressure rating is 150 psi (10.3 bar).
Maid O' Mist 1/8 in. NPT Brass Air Vent
24.99 USD
The no. 72 series Auto-Vents are reliable, automatic air eliminating valves for concealed radiators, pipe lines, tanks and other devices where water or liquids are used for heating and cooling. They have proven to be the solution to problems that have confronted engineers and contractors in which air pockets or traps retard the free circulation of the liquids and reduce the efficiency of the system or appliance. The no. 7 series Auto-Vents air eliminators are made of brass and equipped with a self-closing, float-operated valve. The valve is equipped with a Monel metal spring and a Neoprene valve seat which is unaffected by high temperatures, oil and anti-freeze. No air chamber is required. The vent is regularly fitted with a patented cap that may be used as a check in case of a leak caused by core sand or scale.
Watts 1/2 in. Brass Solder Ball Valve with Drain Full Port Lever
29.99 USD
Full port ball and waste valve is lead free. The copper silicon alloy ball valves feature a side drain port to drain or vent downstream line when the valve is in the off position. The full port orifice ensures maximum flow capacity and its ball is wiped clean during each operation of the valve.
B&K ProLine 1 in. Sweat Brass Gate Valve
24.99 USD
ProLine low lead solder ends gate valve this valve is rated for a maximum of 200 PSI. For use with water, oil, air and 125 PSI steam. The valve should be used where full flow is desirable. Full port. Gate valves provide longest service life when used in full, open or closed position. Non rising, square end stem. Solder ends comply with ANSI B16.18. Cast-iron handle. Import. Manufactured to include no more than 0.25 percent weighted average lead content on wetted surfaces.
Highside Chemicals Just For Copper 5-3/8 in. L X 8-1/2 in. W Copper and Brass Bonding Kit 1 pc
36.99 USD
Highside Chemicals, Inc. has manufactured the highest quality chemical products for the maintenance, installation and repair of refrigeration, air conditioning and plumbing systems for over seventy-five years. All products are thoroughly tested and proven to perform to the highest standards. Our commitment to quality along with excellent customer service and technical support makes Highside Chemicals the best choice.
Homewerks 1 in. Brass Compression Ball Valve Standard Port Quarter-Turn Lever For Water/Oil/Gas
37.99 USD
The Homewerks brass compression ball valve offers high quality performance for residential and commercial applications. Made from lead free brass, this standard port valve is suitable for potable water, oil and air applications. The compression ends allow for solderless connections to copper tubing. Bring quality and efficiency to your project with the Italian made brass compression ball valve from Homewerks.
Homewerks 1/2 in. Brass Compression Ball Valve Standard Port Quarter-Turn Lever For Water/Oil/Gas
21.99 USD
The Homewerks brass compression ball valve offers high quality performance for residential and commercial applications. Made from lead free brass, this standard port valve is suitable for potable water, oil and air applications. The compression ends allow for solderless connections to copper tubing. Bring quality and efficiency to your project with the Italian made brass compression ball valve from Homewerks.
Jordan WMNS AIR JORDAN 1 MID SE - Blue - Size: 8.5
100.93 USD
The Air Jordan 1 Mid has moved from the court to the street, where its influence is bigger than ever. This SE version embellishes classic materials and colors with lace-like accents that symbolize connection.
- Premium ix of materials
- Encapsulated Air-Sole unit in the heel
- Debossed Wings logo on side
- Stitched Swoosh design
- Printed sockliner
- Rubber outsole
Watts 3/4 in. FPT in. X 3/4 in. MPT Brass Boiler Pressure Relief Valve
59.99 USD
This 3/4 inch pressure safety relief valve is used in commercial and industrial applications for low pressure, steam heating boilers and process equipment. It consists of a bronze body construction with NPT threaded male inlet and threaded female outlet drain connection, stainless steel spring, a top-guided stem and a non-stick Teflon disc-to-metal seating.
Jordan AIR JORDAN 1 MID SE - Brown - Size: 8
80.93 USD
The Air Jordan 1 Mid has moved from the court to the street, where its influence is bigger than ever. This SE version embellishes classic materials and colors with lace-like accents that symbolize connection.
- Premium ix of materials
- Encapsulated Air-Sole unit in the heel
- Debossed Wings logo on side
- Stitched Swoosh design
- Printed sockliner
- Rubber outsole
Watts One Handle Brushed Nickel Drinking Water Faucet
64.99 USD
This air gap faucet is designed for dispensing water from a reverse osmosis system or a water filtration unit that requires a drain connection with an air gap. It features a brushed nickel finish, lever for dispensing and swivel neck with high reach design. This faucet also includes 1/4 in. x 4 ft. of feed tubing, 1/4 in. x 4 ft. of rinse water tubing and 3/8 in. x 3 ft. of drain tubing that is pre-attached. This faucet conforms to U.S. plumbing codes. A 1-1/4 in. mounting hole is required.
Jordan AIR JORDAN 1 MID SE - Brown - Size: 8.5
80.93 USD
The Air Jordan 1 Mid has moved from the court to the street, where its influence is bigger than ever. This SE version embellishes classic materials and colors with lace-like accents that symbolize connection.
- Premium ix of materials
- Encapsulated Air-Sole unit in the heel
- Debossed Wings logo on side
- Stitched Swoosh design
- Printed sockliner
- Rubber outsole
Amflo 100 ft. L X 3/8 in. D Polyvinyl Air Hose 300 psi Orange
41.99 USD
PVC air hose is suitable for use with pressures at or below 300 PSI. Crafted with PVC for strength, the hose also features 1/4 inch NPT fittings for a tight connection. The lightweight hose is grease, oil and abrasion resistant and features spinal reinforcement for a strong performance. It's bright orange florescent color make it easily visible.
Watts One Handle Chrome Drinking Water Faucet
44.99 USD
This air gap faucet is designed for dispensing water from a reverse osmosis system or a water filtration unit that requires a drain connection with an air gap. It features a chrome finish, lever for dispensing and swivel neck with high reach design. This faucet also includes 1/4 in. x 4 ft. of feed tubing, 1/4 in. x 4 ft. of rinse water tubing and 3/8 in. x 3 ft. of drain tubing that is pre-attached. This faucet conforms to U.S. plumbing codes. A 1-1/4 in. mounting hole is required.
B&K Mueller Brass Steam Radiator Valve
54.99 USD
B&K Steam Radiator Valve angle 1-1/4 inch FPT x 1-1/4 inch MPT rating 15 PSI steam and 60 PSI non-shock hot water and heat resistant hand wheel.
Homewerks 1-1/4 in. FIP Brass Gate Valve
35.99 USD
A Homewerks gate valve can be used for all types of fluids including water, oil and air. The gate valve has a solid wedge disc that sits at right angle inside the valve to shut off the rate of flow within a pipeline. Gate valves are commonly used in the oil and non-flammable gas industry, as well as industrial manufacturing, pharmaceutical, automotive, marine, commercial and older residential applications. This gate valve installs to female threaded iron pipe connections. Bring quality and efficiency to your project with the brass gate valve from Homewerks.
Homewerks 1 in. FIP Brass Gate Valve
21.99 USD
A Homewerks gate valve can be used for all types of fluids including water, oil and air. The gate valve has a solid wedge disc that sits at right angle inside the valve to shut off the rate of flow within a pipeline. Gate valves are commonly used in the oil and non-flammable gas industry, as well as industrial manufacturing, pharmaceutical, automotive, marine, commercial and older residential applications. This gate valve installs to female threaded iron pipe connections. Bring quality and efficiency to your project with the brass gate valve from Homewerks.