StarTech Dual Port PCI Express Gigabit Ethernet PoE/PSE Network Card Adapter
170.99 USD
Consult the complete sheet with detailed information, compare prices and identify the features of StarTech Dual Port PCI Express Gigabit Ethernet PoE/PSE Network Card Adapter, available at the cost of 170.99 USD; it classifies in the Network Cards category; the seller is StarTech Dual Port PCI Express Gigabit Ethernet PoE/PSE Network Card Adapter, and the manufacturer is StarTech.
The ST2000PEXPSE Dual Port PoE NIC provides two 10/100/1000 Mbps PoE RJ45 ports that can provide up to 25.5W of power each, combining a network data connection and power on a single cable, for less clutter and convenient installations in remote locations. This full/low profile Gigabit server adapter supports the IEEE 802.3at (Type 1 and 2) standard for a Power Sourcing Equipment (PSE) device and can deliver 48V DC power to compliant Powered Devices (PD).• Dual 10/100/1000 Mbps PoE RJ45 ports • Supports IEEE 802.3at (Type 1, 2) Power over Ethernet standard • Power Sourcing Equipment (PSE) design, provides data and up to 25.5W of power on each port • Built-in SATA and LP4 Molex power connector • Unique surge protection design helps prevent system damage in the event of lightning strikes • Jumbo Frame support • On-chip 48 KB Big Transmit/Receive Buffer Support • Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and supports IEEE 802.1Q VLAN tagging, • IEEE 802.1P Layer 2 Priority Encoding and IEEE 802.3x Full Duplex Flow Control • Crossover Detection & Auto-Correction (Auto MDIX) • Includes full and low profile/half-height installation brackets This eliminates the need for a separate power source and cable for remote networked devices such as IP cameras, IP phones and wireless access points. Suitable for any PCI Express-enabled client, server or workstation, this versatile PoE network adapter supports features such as Jumbo Frames, VLAN tagging and Wake on LAN (WOL). The ST2000PEXPSE PoE NIC is backed by a StarTech 2-year warranty and free lifetime technical support. Applications • Provide power to PoE powered devices, where they have no access to a power source • Add 2 Ethernet ports to a workstation or server computer from a single PCIe slot • Connect to 2 separate networks simultaneously • Install dual networking capabilities into a small form factor or other space-constrained computer system • Connecting Power over Ethernet-enabled IP cameras, IP phones or Wireless Access Points Advantage • Reduces cable clutter and makes it easier to install devices in remote locations that are powered by the the PSE network card, with up to 25.5W of power delivery as well as a solid network link over a single cable connection • Suitable for installation in full profile or small form factor computer cases using the included half-height/low profile bracket, adding two network connection ports using a single PCI Express slot • Provides versatile network connections with support for advanced features such as Jumbo Frames and VLAN tagging, as well as Wake-On-LAN and Auto MDIX
EAN: 0065030849128
Shipping Cost: 0 USD
Availability: pre order
Condition: new
The ST2000PEXPSE Dual Port PoE NIC provides two 10/100/1000 Mbps PoE RJ45 ports that can provide up to 25.5W of power each, combining a network data connection and power on a single cable, for less clutter and convenient installations in remote locations. This full/low profile Gigabit server adapter supports the IEEE 802.3at (Type 1 and 2) standard for a Power Sourcing Equipment (PSE) device and can deliver 48V DC power to compliant Powered Devices (PD).• Dual 10/100/1000 Mbps PoE RJ45 ports • Supports IEEE 802.3at (Type 1, 2) Power over Ethernet standard • Power Sourcing Equipment (PSE) design, provides data and up to 25.5W of power on each port • Built-in SATA and LP4 Molex power connector • Unique surge protection design helps prevent system damage in the event of lightning strikes • Jumbo Frame support • On-chip 48 KB Big Transmit/Receive Buffer Support • Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and supports IEEE 802.1Q VLAN tagging, • IEEE 802.1P Layer 2 Priority Encoding and IEEE 802.3x Full Duplex Flow Control • Crossover Detection & Auto-Correction (Auto MDIX) • Includes full and low profile/half-height installation brackets This eliminates the need for a separate power source and cable for remote networked devices such as IP cameras, IP phones and wireless access points. Suitable for any PCI Express-enabled client, server or workstation, this versatile PoE network adapter supports features such as Jumbo Frames, VLAN tagging and Wake on LAN (WOL). The ST2000PEXPSE PoE NIC is backed by a StarTech 2-year warranty and free lifetime technical support. Applications • Provide power to PoE powered devices, where they have no access to a power source • Add 2 Ethernet ports to a workstation or server computer from a single PCIe slot • Connect to 2 separate networks simultaneously • Install dual networking capabilities into a small form factor or other space-constrained computer system • Connecting Power over Ethernet-enabled IP cameras, IP phones or Wireless Access Points Advantage • Reduces cable clutter and makes it easier to install devices in remote locations that are powered by the the PSE network card, with up to 25.5W of power delivery as well as a solid network link over a single cable connection • Suitable for installation in full profile or small form factor computer cases using the included half-height/low profile bracket, adding two network connection ports using a single PCI Express slot • Provides versatile network connections with support for advanced features such as Jumbo Frames and VLAN tagging, as well as Wake-On-LAN and Auto MDIX
EAN: 0065030849128
Shipping Cost: 0 USD
Availability: pre order
Condition: new
Compare Similar Products
StarTech 5-Port PoE-Powered Gigabit Ethernet Switch with 2x PSE/PoE Ports
153.99 USD
The 5-Port PoE-Powered Gigabit Ethernet Switch with 2x PSE/PoE Ports is a powerful and efficient solution for expanding your Gigabit network connectivity to remote locations where a power source may not be readily available. This high-performance switch is designed to power and network your Gigabit PoE-powered devices using two 802.3af PSE ports, offering a total power output of up to 15W. Encased in a rugged metal housing, this advanced switch is ideal for deployment in harsh environments, offering both 802.3af and 802.3at power input compatibility. It supports 10/100/1000 Mbps networks and complies with IEEE 802.3, 802.3u, 802.3ab standards, ensuring a reliable and high-speed Ethernet connection for up to five devices. With up to 9K Jumbo Frame support, Auto MDIX, and Auto Negotiation support, this switch is designed to provide seamless data transfer. It is compliant with IEEE 802.3az Energy-Efficient Ethernet, IEEE 802.3x full duplex flow control, and backpressure for half-duplex operation, making it a cost-effective and energy-efficient choice for your networking needs. The switch boasts a 128KB frame buffer memory and supports up to 4,000 MAC address entries, offering ample capacity for small to medium-sized networks. Powered through your existing PoE network infrastructure, this switch provides installation flexibility, allowing you to deploy it exactly where you need it, without the need for an external power adapter. The integrated PSE ports can save you money by delivering both power and data to your PoE devices without the expense of additional PoE injectors or switches. The switch provides 15W of total power output across both ports, making it an ideal solution for powering and connecting PoE devices such as IP phones and cameras where a typical AC-powered network device can't be used. For added peace of mind, the 5-port Gigabit Ethernet switch offers redundant power input using the included power adapter. This ensures that the switch remains operational during power dips, failures, or outages, making it a reliable choice for factories, warehouses, and other industrial environments. Whether you're looking to provide greater network scalability, connect and power PoE devices such as IP phones, surveillance cameras, Wi-Fi access points, or install in offices, schools, campuses, factories, and other large complexes, this 5-Port PoE-Powered Gigabit Ethernet Switch with 2x PSE/PoE Ports is a versatile and reliable choice.
Ubiquiti Networks USW-24-POE Gen 2 120W Gigabit Layer 2 Ethernet Switch with SFP
379 USD
An advanced and high-tech solution for your networking needs, the USW-24-POE Gen 2 120W UniFi Managed Gigabit Layer 2 Ethernet Switch with SFP is a powerful and efficient tool for any modern enterprise. This reliable switch boasts twenty-four Gigabit Ethernet ports, including sixteen auto-sensing 802.3at PoE+ ports, and two SFP ports, providing robust Gigabit PoE links to your RJ45 Ethernet devices and offering Gigabit fiber uplink options to your enterprise network.The USW-24-POE Gen 2 120W UniFi Managed Gigabit Layer 2 Ethernet Switch is not just about power, but also about convenience and ease of use. It features a 1.3" touch LCM that provides real-time status information, ensuring you're always in the know about your network's performance. With a depth of just 7.9", its compact, fanless design can be seamlessly integrated into a SOHO rack cabinet, making it a perfect fit for space-conscious environments.This Ethernet switch is managed and configured by the UniFi Network Controller, which also supports the UniFi mobile app. This means you can configure and monitor virtually all of the switch's features from anywhere, using a graphical user interface. The USW-24-POE offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode per port, which can be set to switching, mirroring, or aggregate, providing flexibility and control over your network's data traffic.In addition, this switch supports both 802.3af (15W PoE) and 802.3at (25W PoE+) power sources, making it capable of powering devices that require more power than traditional PoE switches can provide. This eliminates the need for a separate power source for devices such as IP cameras or VoIP phones, simplifying your network setup.In summary, the USW-24-POE Gen 2 120W UniFi Managed Gigabit Layer 2 Ethernet Switch with SFP is a high-performance, feature-rich solution designed to handle large amounts of data traffic, making it an ideal choice for businesses seeking to optimize their network performance.
StarTech Mini PCI Express Gigabit Ethernet Network Adapter NIC Card
66.99 USD
Bring high-speed connectivity to your Mini PCI Express-enabled computer system with the ST1000SMPEX Mini PCI Express Gigabit Network Adapter Card. This robust and reliable adapter card delivers a lightning-fast 1000Mbps network connection, making it an ideal solution for Mini-ITX motherboards and other small form factor or embedded systems. Designed with efficiency in mind, this Mini PCI Express Gigabit Adapter supports features such as NDIS5 checksum and large send offload, significantly reducing CPU utilization. It also supports Wake-on-LAN (WOL) and Remote Wake-up power management, making it a versatile choice for a wide range of networking scenarios. The adapter card is equipped with one 10/100/1000Mbps compatible RJ-45 Ethernet port, ensuring seamless compatibility with your existing network infrastructure. It is fully compliant with IEEE 802.3, 802.3u, and 802.3ab specifications for 10/100/1000 Mbps connections, offering reliable and consistent performance. With support for Jumbo Frame up to 9k, Crossover Detection & Auto-Correction (Auto MDIX), IEEE 802.1Q VLAN Tagging, and Full and Half duplex operating modes, this adapter card is ready to handle your most demanding networking needs. It also supports Microsoft NDIS5 Checksum Offload (IPv4, TCP, UDP) and Large Send Offload, further enhancing its performance and efficiency. The ST1000SMPEX Mini PCI Express Gigabit Network Adapter Card is compliant with PCI Express Mini Card specification 1.1 and includes both Full and Low Profile installation brackets, providing additional installation options for various system configurations. Whether you're looking to add a Gigabit networking port to a small form factor Mini-ITX system, replace a failed built-in Gigabit Ethernet port, or simply enhance your system's networking capabilities, this high-quality Mini PCIe Network Adapter is a durable and efficient solution.
Ubiquiti Networks USW-24-POE Gen 2 120W Gigabit Layer 2 Ethernet Switch with SFP
284 USD
An advanced and high-tech solution for your networking needs, the USW-24-POE Gen 2 120W UniFi Managed Gigabit Layer 2 Ethernet Switch with SFP is a powerful and efficient tool for any modern enterprise. This reliable switch boasts twenty-four Gigabit Ethernet ports, including sixteen auto-sensing 802.3at PoE+ ports, and two SFP ports, providing robust Gigabit PoE links to your RJ45 Ethernet devices and offering Gigabit fiber uplink options to your enterprise network.The USW-24-POE Gen 2 120W UniFi Managed Gigabit Layer 2 Ethernet Switch is not just about power, but also about convenience and ease of use. It features a 1.3" touch LCM that provides real-time status information, ensuring you're always in the know about your network's performance. With a depth of just 7.9", its compact, fanless design can be seamlessly integrated into a SOHO rack cabinet, making it a perfect fit for space-conscious environments.This Ethernet switch is managed and configured by the UniFi Network Controller, which also supports the UniFi mobile app. This means you can configure and monitor virtually all of the switch's features from anywhere, using a graphical user interface. The USW-24-POE offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode per port, which can be set to switching, mirroring, or aggregate, providing flexibility and control over your network's data traffic.In addition, this switch supports both 802.3af (15W PoE) and 802.3at (25W PoE+) power sources, making it capable of powering devices that require more power than traditional PoE switches can provide. This eliminates the need for a separate power source for devices such as IP cameras or VoIP phones, simplifying your network setup.In summary, the USW-24-POE Gen 2 120W UniFi Managed Gigabit Layer 2 Ethernet Switch with SFP is a high-performance, feature-rich solution designed to handle large amounts of data traffic, making it an ideal choice for businesses seeking to optimize their network performance.
StarTech 1 Port PCI 10/100/1000 32 Bit Gigabit Ethernet Network Adapter Card
23.99 USD
It's time to upgrade your network connectivity with our reliable and high-speed 1 Port PCI 10/100/1000 32 Bit Gigabit Ethernet Network Adapter Card. This user-friendly and efficient adapter card offers a seamless connection to a Gigabit Ethernet network, adhering to IEEE 802.3, 802.3u, 802.3ab, and 802.3x standards. Designed to fit any PCI-enabled client, server, or workstation, this durable network adapter card supports high-performance dual-channel networking. It facilitates maximum data transfer speeds of 1000Mbps in each direction, totaling up to 2000 Mbps. This is up to ten times faster than standard 10/100 Ethernet, making it ideal for high-bandwidth applications such as video conferencing, online gaming, and large file transfers.Our Gigabit Ethernet Network Adapter Card is compatible with a wide array of operating systems, including Linux, Windows 10, 8/8.1, 98SE, ME, 2000, XP, XP-64bit, Vista, Vista-64bit, 7, 7-64bit, and Mac OS 10.4. This ensures its versatility across different platforms and user requirements.The card features a single 10/100/1000Mbps compatible RJ45 Ethernet port and includes LED indicators for Network Link/Activity and 10/100/1000 Mbps. It supports full and half duplex modes, Wake-on-LAN function, and Crossover Detection & Auto-Correction (Auto MDI/MDI-X). The package includes a low-profile installation bracket, making it easy to install the card in a small form factor/low profile computer case/server. This dual-profile design is suitable for both full and low-profile systems, making it a perfect fit for desktops, workstations, or servers. Whether you're looking to add an additional Ethernet port to a workstation or server for redundancy, upgrade a computer's 10/100 Ethernet port to a 1000 compatible port, or add networking capabilities to an old system with no Ethernet port, our 1 Port PCI 10/100/1000 32 Bit Gigabit Ethernet Network Adapter Card is the perfect solution.
StarTech 1 Port PCI Express Dual Profile Parallel Adapter Card
35.99 USD
What you're looking at is the PEX1P PCIe Parallel Adapter card, a versatile solution designed to be installed in a PCI Express (PCIe) slot. This enables you to connect EPP/ECP parallel peripherals to any computer system, expanding your device's functionality. Built on a native single-chip design (Oxford OXPCIe952), this adapter leverages the full potential of PCI Express, guaranteeing optimal performance and reliability.This high-performance SPP/EPP/ECP parallel card introduces an additional DB25 parallel port to your system. It's an ideal solution for connecting a wide range of devices such as printers, scanners, CD-R/RW drives, memory card readers, and bar code scanners. The plug and play capability of this parallel adapter card ensures a hassle-free installation process, making it a user-friendly choice.The PCIe Parallel Adapter card comes with both standard and half-height/low profile mounting brackets, making it adaptable to almost any system. It fully supports the existing Centronics interface and is compliant with the PCI Express Base Specification 1.0a, PCI 2.2, and PCI Power Management 1.0.The key advantage of this card is its ability to integrate with existing parallel devices, saving you the cost and inconvenience of upgrading peripherals to work with newer systems. It supports SPP, EPP, and ECP communication modes, ensuring maximum compatibility with your parallel peripherals. Whether you need to connect printers, scanners, CD-R/RWs, Zip drives, or memory card readers, this adapter card has you covered.
StarTech 2-Port PCI Express 10GBase-T Ethernet Network Card with Intel X540 Chip
395.99 USD
Now, you can add 10 GbE networking, while minimizing your deployment costs. This 10Gbase-T network card (NIC) lets you add two RJ45 ports through a single PCI Express slot, to deliver reliable high-speed network connections to your workstations and servers without draining your budget.• Add two 100/1000/10Gbase-T RJ45 ports, providing cost-effective network connectivity for high bandwidth workstations and servers • Intel X540 chipset with Intel Virtualization Technology for Connectivity • Up to 20Gbps (full duplex) bandwidth per port • Compliant with PCI Express Rev2.0 specification, using PCIe x4 (or higher) slot • PXE network boot support • Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab • Support for 802.3ad Link Aggregation • Auto-MDIX support • Auto negotiation support • Up to 15K jumbo frame support • Wake-on-LAN support • IEEE802.3az Energy Efficient Ethernet (EEE) • Supports IEEE 802.1Q VLAN tagging • Full or low-profile (LP bracket included) installation Versatile and Cost Effective Compatible with a broad range of operating systems, this versatile dual-port NIC is ideal for many business applications that require upgrades to servers or workstations. It's a cost-effective way to enhance your server or computer capabilities by adding two powerful 10-Gigabit Ethernet ports, with support for advanced features such as VLAN tagging, jumbo frames, Wake-On LAN and Auto-MDIX. Reliable, High-Performance Connectivity This 2-port PCI Express 10GBase-T network card features the Intel X540 chipset, designed to deliver the power, performance and enhanced capabilities you need for reliable network connections to your server or computer. The X540 chipset provides many advanced features including Intel Virtualization Technology for connectivity and PXE network boot support. Compliant with IEEE 802.3/u/ab standards, the network card delivers a dependable way to upgrade or replace your existing network ports with dual 100/1000/10G compatible RJ45 ports, providing throughput capability of up 10Gbps in each direction (20Gbps total). It connects through a single, four-lane (x4 or higher) PCI Express slot. Easy Installation With a dual-profile design, the PCI Express network card installs easily into a wide range of computer/server chassis, regardless of form factor. The card comes equipped for installation in a full-sized chassis and includes a low-profile/half-height installation bracket that you can use as needed. Applications • Upgrades to servers or workstations in need of enhanced performance, advanced features and greater reliability • Upgrade a 10/100/1000 Ethernet port on your computer to 10GbE networking • Ideal for high-demand database servers and mission-critical systems that need redundant network connectivity • Add networking capabilities to an old system with no Ethernet port
StarTech PCI Express 10 Gigabit Ethernet Fiber Network Card
215.05 USD
The PEX10000SFP 10 Gigabit Fiber Network Card is a cost-effective solution that delivers fast and reliable 10 Gbps network access at longer distances than copper-based networks. Using the SFP+ transceiver of your choice, you can connect your PCI Express-based server or workstation directly to your 10G fiber optic network. • Faster networking with up to 10Gbps over fiber optic cabling• Broad SFP+ compatibility and compliant with most 10 Gigabit SFP+ modules (10GBASE-LR/SR/LRM)• Lower power consumption (4.12W max) than most comparable cards, with an energy-efficient chipset• Virtualization (VMWare ESXi 5.0/5.1 and Microsoft Hyper-V) and iSCSI support• Compliant with IEEE 802.3ae (10GBASE-LR/SR only) and IEEE 802.3aq (10GBASE-LRM)• Up to 16K Jumbo Frame support• Supports 802.3ad (Link Aggregation) and 802.1Q (VLAN Tagging)• Compliant with PCI Express Rev 2.0 specification, using PCIe x4 (or higher) slot• Supports Checksum Offload (IP, TCP, UDP) and Large Send Offload• Supports PCI Message Signaled Interrupt (MSI)• Configured with standard-profile bracket, low-profile/half-height bracket included, ideal for installation in• 1U server and rackmount applications Faster Networking Speed With the rising strain on network resources due to large file transfers, multimedia content and an increase in network users, more bandwidth is often required at various levels of your networking infrastructure. With up to 10 Gbps bandwidth, this fiber NIC lets you transfer more data at faster speeds and is an ideal low-cost addition to your server or high-powered workstation. Greater Flexibility & Distance The PEX10000SFP adapts to your network fiber connection and distance requirements to offer flexible configuration via an open SFP+ slot and is compatible with most 10GbE SFP+ transceivers. With broad SFP+ compatibility this cost-effective fiber card lets you use your preferred SFP+ module, giving you more options to connect your computer directly to a fiber network at greater distances. Superior Power Efficiency For improved operating efficiency, the PEX10000SFP features an energy-efficient Tehuti TN4010 chipset that offers significantly reduced power consumption versus most comparable cards, including the Intel 82599 chipset cards. Superior power efficiency also helps minimize heat generated by the card, in turn avoiding an increase in the operating temperature within your server case. Power Consumption Benchmark This versatile 10 Gbps network card offers 16K Jumbo Frame and 802.1q VLAN tagging support, as well as compatibility with VMWare ESXi 5.0/5.1, Microsoft Hyper-V virtualization software and iSCSI support to combine LAN and SAN functions. Backed by a StarTech 2-year warranty and free lifetime technical support. Advantage • Scale your network performance to meet increased demand, with 10 Gbps speed over greater distances than standard copper networks• Adapt to your network configuration using the 10GbE fiber...
StarTech Dual Port ExpressCard Gigabit Laptop Ethernet NIC Network Adapter Card
152.99 USD
Take your connectivity to the next level with the EC2000S Dual Port ExpressCard Gigabit Laptop Ethernet NIC Network Adapter Card. Designed for professionals who require robust and high-speed internet or network access, this adapter card offers a seamless solution for laptops and small form factor systems equipped with an ExpressCard slot.With dual RJ45 Ethernet ports, this ExpressCard/34 adapter ensures you can connect to two separate physical networks simultaneously, each with dedicated bandwidth. This is ideal for business or IT professionals managing multiple network connections or running virtual machines that require distinct network access.The EC2000S is fully compliant with IEEE 802.3, 802.3u, and 802.3ab specifications, supporting 10/100/1000 Mbps connections for versatile and reliable use. It accommodates both Full and Half duplex operating modes, enhancing its compatibility with various network types and maximizing throughput.Advanced features such as IEEE 802.1Q VLAN Tagging support, Microsoft NDIS5 Checksum Offload (IPv4, TCP, UDP), and Large Send Offload are integrated to reduce CPU utilization, ensuring efficient system performance. Additionally, the adapter card includes Wake-on-LAN (WOL) and Remote Wake-up power management options, which are essential for remote troubleshooting and maintenance.The EC2000S also supports IEEE 802.3x Full Duplex Flow Control, Auto-Negotiation with Next Page capability, and comes with intuitive Link/Activity and Gigabit Link LED indicators for easy monitoring of network status. Its compliance with the ExpressCard 1.0 specification, along with Plug-and-Play and Hot Swap compatibility, ensures a user-friendly experience that minimizes setup time and technical hurdles.This compact and portable Gigabit Ethernet Adapter is an excellent choice for replacing a failed built-in Gigabit Ethernet port on a laptop or for any user who needs to maintain high-speed, reliable network connections. The EC2000S is backed by a StarTech lifetime warranty and free lifetime technical support, providing peace of mind and long-term reliability.Please note that on Intel Ivy Bridge based systems, only one network port is usable, but this does not detract from the adapter's overall performance and utility. Whether for business applications, IT management, or as a robust replacement for built-in network ports, the EC2000S Dual Port ExpressCard Gigabit Laptop Ethernet NIC Network Adapter Card stands as a durable, high-speed, and reliable choice for professionals on the go.
Ubiquiti Networks UniFi USW-16-POE Gen2 16-Port Gigabit PoE Switch with SFP
299 USD
The USW-16-POE is a configurable Gigabit Layer 2 switch with sixteen Gigabit Ethernet ports including eight auto-sensing 802.3at PoE+ ports, and two SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. The USW-16-POE features a 1.3" touch LCM to provide status information. With a depth of 7.9", the compact fanless design can be easily installed in a SOHO rack cabinet.Managed and configured by the UniFi Network Controller with UniFi mobile app support, the USW-16-POE offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere.Managed by UniFi Network Controller version: 5.11.27 or higherWorks with UniFi Network Controller• Manage Your Networks from a Single Control Plane• Intuitive and Robust Configuration, Control and Monitoring• Remote Firmware Upgrade• Users and Guests• Guest Portal/Hotspot Support
StarTech 4 Port PCI Express SuperSpeed USB 3.0 Card Adapter
92.99 USD
Before you settle for less, consider the PEXUSB3S42V 4-Port PCI Express USB 3.0 Card, a high-speed, reliable solution for expanding your computer's connectivity. This compact and versatile card allows you to add four USB 3.0 ports with two dedicated 5 Gbps channels to your PCIe x4-enabled PC, enhancing your system's performance and versatility.Unlike traditional single bus USB 3.0 cards that share your maximum bandwidth between all ports, this card employs an independent port architecture. This design improves USB 3.0 performance by transferring data on two individual channels, resulting in faster file transfers and less wait time on data transfers. The PEXUSB3S42V 4-Port PCI Express USB 3.0 Card is enhanced with UASP support (USB Attached SCSI Protocol), allowing it to perform up to 70% faster than conventional USB 3.0 when paired with a UASP supported enclosure. This efficient protocol optimizes transfers by processing multiple commands simultaneously, significantly increasing transfer speeds.For high-power USB devices, this card includes an optional SATA or LP4 power connector to connect to your system power supply. It can deliver up to 900mA of power per port to USB 3.0 bus-powered devices (500mA for USB 2.0), ensuring your devices are adequately powered. The card also supports USB Battery Charging Specification 1.2 (Apple Mode only), enabling faster charging for compatible Apple devices. It maintains compliance with USB 3.0 standards while offering backward compatibility with existing USB 2.0 / 1.1 devices, making it a versatile addition to any setup.The USB 3.0 PCIe card comes equipped with a standard profile bracket and includes a low-profile/half-height bracket for installation in small form-factor computers. It also features a hot-swap feature, allowing you to connect/disconnect devices without powering down the system.Whether you're looking to upgrade an older PCIe-based system to USB 3.0 connectivity and UASP support, or expand the USB capabilities of your system with four external ports for connecting additional devices, the PEXUSB3S42V 4-Port PCI Express USB 3.0 Card is a durable and reliable choice.
StarTech 2 Port Low Profile Native RS232 PCI Express Serial Card with 16550 UART
52.99 USD
An innovative solution for expanding your computer's connectivity, the PEX2S553LP Low Profile Native RS232 PCI Express Serial Card transforms a single PCI Express slot into two robust RS232 (DB9) serial connections. This high-performance card is engineered with a native single-chip design, allowing you to leverage the full potential of PCI Express (PCIe) technology. This design significantly reduces the CPU load by up to 48% compared to conventional bridge chip serial cards, enhancing your system's performance and reliability.This PCI Express Serial Card features one high-speed RS232 serial port, capable of data transfer rates up to 460.8 Kbps. It comes pre-configured with a half-height/low profile mounting bracket, making it an ideal choice for both standard and low-profile systems. An optional standard profile bracket is also included for added versatility.The card's advanced features include selectable power output on pin 9 for the serial port, automated out-of-band flow control using CTS/RTS and DSR/DTR, and automated in-band software flow control using programmable Xon/Xoff in both directions. It also boasts a 128-byte deep FIFO per transmitter and receiver, ensuring smooth and efficient data transmission.The PCI Express RS232 Serial Adapter Card is compatible with a wide range of operating systems, including Windows 2000/XP/2003/Vista/Windows 7/Server 2008 R2 (32 and 64-bit), and Linux Kernel 2.6.11 and up. This makes it a versatile solution for various applications, from self-service automated machines and kiosks to POS retail systems and ATM machines.Whether you need to control serial devices like scales, touchscreens, magnetic card readers, bar code scanners, receipt printers, label printers, or surveillance cameras, this PCI Express Serial Card offers a reliable and efficient solution. This product serves as a suitable replacement for the StarTech PEX2S552LP card.Experience the advantage of the native single-chip, single-lane PCI Express technology, and enjoy reduced CPU load and enhanced performance with the PEX2S553LP Low Profile Native RS232 PCI Express Serial Card. Its easy installation and user-friendly instructions save you time and hassle, making it an invaluable addition to your computer system.
StarTech 2 Port PCI Express SuperSpeed USB 3.0 Card with UASP Support
46.99 USD
Enhance your computer's connectivity and performance with the 2 Port PCI Express SuperSpeed USB 3.0 Card with UASP Support. This robust and reliable expansion card provides your PC with one internal and one external USB 3.0 port, enabling you to connect a wide range of devices for lightning-fast data transfer speeds. With its durable construction and compact design, this user-friendly card fits seamlessly into a PCI Express slot, instantly upgrading your system's capabilities.The card features a native NEC PCI Express host controller chipset, ensuring high-speed data transfers with the USB 3.0 standard, which supports rates of up to 5Gbps. This is a tenfold increase over USB 2.0's 480Mbps and a significant leap from USB 1.1's 12Mbps. The backward compatibility ensures that your older devices will still work smoothly, while the internal USB 3.0 connection offers versatility for internal storage solutions or front-bay hubs.UASP support elevates this card's performance further, allowing for up to 70% faster transfer speeds when paired with UASP-enabled enclosures, compared to traditional USB 3.0. This efficiency is achieved by optimizing transfer commands, reducing wait times significantly for data transfers. The optional SATA power connector is a testament to the card's user-friendly design, providing up to 900mA of power per port for bus-powered USB 3.0 devices, ensuring reliable performance even for power-hungry devices.Fully compliant with USB 3.0 revision 1.0 and Intel XHCI rev0.96 specifications, this card is also PCI Express 2.0 compliant. It supports all USB transfer speeds, including Super Speed (5Gbps), High Speed (480Mbps), Full Speed (12Mbps), and Low Speed (1.5Mbps), and is hot-swapping and plug-and-play compliant. The card also adheres to the PCI Bus Power Management Interface Specification revision 1.2 and fully supports Control, Bulk, Interrupt, and Isochronous Transfer types.With UASP support for Windows 8, Server 2012, and Linux kernel 2.6.3 or later, the card's performance is further enhanced, showing a significant reduction in processor resources required during peak performance. This makes the 2 Port PCI Express SuperSpeed USB 3.0 Card with UASP Support a versatile and efficient solution for connecting a variety of USB 3.0 peripherals, from external hard drives to audio/video devices, ensuring swift and reliable data transfer for your computing needs.
StarTech 4 Port Native PCI Express RS232 Serial Adapter Card with 16550 UART
112.99 USD
If you're seeking a solution to expand your PC's connectivity, the PEX4S553 4-Port Native PCI Express RS232 Serial Adapter Card with 16550 UART is an ideal choice. This high-performance adapter card allows you to add four RS232 (DB9) serial ports using just a single PCI Express expansion slot, enhancing your computer's functionality without overloading your CPU.The PEX4S553 is engineered with a native single-chip design, which optimizes the full potential of PCI Express (PCIe) technology. This design significantly reduces the CPU load by up to 48% compared to conventional bridge-chip serial cards, ensuring smoother and more efficient operations.This 4-port serial adapter card is equipped with a 256-byte deep FIFO per transmitter and receiver, supporting high-speed data transfer rates of up to 128000bps. It also features a built-in 16C450/550 compatible UART, compliant with the PCI Express Base Specification 1.1, ensuring reliable and consistent performance.The PEX4S553 comes with four half-height/low-profile brackets, making it versatile enough to be installed in virtually any PC case, regardless of its form factor. This flexibility makes it an excellent choice for various applications, including POS retail systems, bank teller workstations, self-service automated machines, ATMs, and surveillance systems.Whether you're managing keyboards, cash drawers, receipt printers, card readers, scales, touchscreens, or security cameras, this 4-port serial adapter card offers the robust functionality and reliable performance you need. Please note that this product description does not include warranty, price, or availability information.
StarTech 2 Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card
80.49 USD
From enhancing your computer's storage capacity to boosting its overall speed, the PEXMSATA3422 PCI Express SATA Card is an essential tool for any tech-savvy user. This high-performance card offers multiple 6 Gbps SATA connections, allowing you to connect high-performance SSDs (Solid State Drives) and hard drives in a HyperDuo RAID array. With the ability to add two mSATA slots and two SATA III ports to your computer through a single PCIe x4 slot, this card is a powerhouse of functionality. It supports HyperDuo SSD auto-tiering, a feature that seamlessly merges SSD performance with HDD capacity, giving you the best of both worlds. The PEXMSATA3422 PCI Express SATA Card is fully compliant with SATA 3.0 specifications and is backward compatible with SATA I/II (1.5/3.0Gbps) drives. It supports hardware RAID 0 and 1 modes, and is compliant with PCI Express 2.0 standards. For ease of use, this card offers simple HyperDuo configuration via card BIOS or an intuitive GUI console (Windows only). It supports the TRIM command with compatible SSD and Operating System, as well as Native Command Queuing (NCQ) and ATA/ATAPI commands. The card comes with on-board latching mSATA slots, allowing for easy SSD installation with no screws required. It is configured with a standard profile bracket and includes a low-profile/half-height bracket for installation in small form-factor computers. Featuring HyperDuo technology, this SATA card offers SSD auto-tiering, balancing the performance advantages of SSD storage with the cost-effectiveness and large capacity of standard hard drives. By combining SSD and HDD drives into a single volume (up to 3 SSD + 1 HDD), HyperDuo works in the background to identify and move frequently accessed files to the faster SSD drive(s) for improved data throughput - up to 80% of SSD performance! This versatile RAID controller card helps to relieve the internal space constraints often associated with multi-drive configurations by allowing you to install two mSATA SSDs directly to the card via convenient, latching slots. With dual mSATA slots, as well as two internal SATA ports, the card offers an effective hardware RAID solution, with native RAID (0, 1) support. The PCIe SATA controller also offers Port Multiplier (PM) support, so you can connect multiple SATA drives to just one port, for a total of 7 drives (up to 4 drives through PM on one port, plus a single drive to the other SATA port and two mSATA slots). Whether you're looking to optimize your system for I/O intensive applications such as office suites, photo/video editing, and media players, or you need to upgrade an older PCIe-based system to SATA 6Gbps capability to better utilize faster SATA drives, the PEXMSATA3422 PCI Express SATA Card is the perfect solution. Please note: The HyperDuo automatic storage tiering feature is compatible with computers that use a BIOS. The maximum throughput of this card is limited by the bus interface. Only one port can use the Port Multiplier...
StarTech 2 Port IEEE 1284 PCI Express/PCI-e Parallel Adapter Card
81.99 USD
The PEX2PECP2 2 Port PCI Express Parallel Adapter Card - EPP/ECP/SPP/PS2 parallel card adds two IEEE1284 parallel ports to your PC, with support for parallel data communication at speeds of up to 1.5 Mbps.This high performance 2 Port PCI Express parallel card adds 2 DB25 parallel ports, perfect for connectingprinters, scanners, memory card readers, bar code scanners and more.• Supports Standard Parallel Port(SPP), Enhanced Parallel Port(EPP), Enhanced Capability Port(ECP) and PS/2• Data transfer rate up to 1.5 Mbps• Standard and low-profile brackets included With the added convenience of plugand-playcapability, installing the parallel adapter card is hassle-free. The PCIe Parallel card also includes bothstandard and half-height/low profile mounting brackets for compatibility with almost any system form factor.Backed by a StarTech Lifetime Warranty and free lifetime technical support. Applications • Connects any parallel peripheral including printers, scanners, CD-R/RWs, Zip drives and memory card readers Advantage • Standard and low profile bracket included allowing install into almost any system• Use existing parallel devices with PCI Express systems saving the cost and hassle of upgrading peripherals to work with newer systems• Supports SPP, EPP, ECP and PS/2 communication modes for maximum compatibility with your parallel peripherals
StarTech 4-Port PCI Express USB 3.0 Card with 3 External and 1 Internal Ports
45.99 USD
Discover the power of enhanced connectivity with our 4-Port PCI Express USB 3.0 Card. This high-speed, versatile, and reliable solution offers you the ultimate in connection flexibility with three external ports and one internal port, expanding your computer's connectivity options. Designed to fit both standard and small form-factor computers, this durable USB 3.0 card comes with a low-profile bracket included, ensuring a seamless fit in any system. With data transfer rates of up to 5 Gbps, this high-speed card supports UASP for more efficient data transfers, offering around 70% faster read speed and 40% faster write speed over traditional USB 3.0 when paired with a UASP-enabled enclosure.This user-friendly card is easy to install with native OS support in Windows 8.1, 8, 7, and Linux kernel 2.6.31 or later, ensuring you can get up and running quickly. The built-in optional SATA power connector provides up to 900mA per USB port, ensuring reliable power for your connected devices.Experience the convenience of having three external USB 3.0 ports at your disposal, allowing you to connect a range of devices such as tablets, external hard drives, and more. The card also features an internal USB port, perfect for securely connecting devices like flash drives inside your computer case.Backward compatibility with USB 2.0 and 1.x devices means you won't have to worry about upgrading your existing devices, saving you both cost and hassle. Whether you're looking to enhance the connection capabilities of your PCI Express enabled computer or server, or connect external hard drives, tablets, smartphones, CD/DVD drives, webcams, or game controllers to your computer, this 4-Port PCI Express USB 3.0 Card is the perfect solution.
StarTech 4 Port RS232 Mini PCI Express Serial Card with 16650 UART, Green
117.99 USD
The MPEX4S952 4-Port RS232 Mini PCI Express Serial Card (16650 UART) turns a mini-PCIe slot into fourRS232 (DB9) serial ports with data rates up to 921.6 Kbps - a cost-saving solution for adding serial support to embedded systems missing the functionality. A native PCIe single-chip design enables you to take advantage of full PCI Express bus capability, by providing improved speed and reliability while reducing the load applied to the CPU by as much as 48% over conventional "bridge chip" serial cards .Backed by a StarTech Lifetime Warranty and free lifetime technical support.• Four high speed RS232 serial ports with data transfer rates up to 921.6 Kbps• High Performance 16650 UART• Includes 4x 30cm IDC to DB9 serial cables• 256-byte deep FIFO per transmitter and receiver• Native single-chip, single lane PCI Express• In-band software flow control, using programmable Xon/Xoff in both directions• Automated out-of-band hardware flow control using RTS/CTS• Compliant with PCI Express base specifications revision 1.1 Applications • Add serial ports to industrial embedded computers and systems• Add RS232 serial control to an embedded or slim media center/media server/all-in-one PC• Add RS232 serial ports to slimline POS systems Advantage • The smallest form factor available, for internally adding serial ports to any embedded system• Native single-chip design means up to 48% less load on your CPU which is critical for small embedded PCs that use low power, low MHz CPUs
StarTech 3 Port 2b 1a 1394 Mini PCI Express FireWire Card Adapter
89.99 USD
Become a master of connectivity with the MPEX1394B3 3-Port Mini PCI Express FireWire Card Adapter. This compact yet powerful device is a PCI Express to FireWire-800/FireWire-400 adapter, designed to enhance your system's external FireWire connectivity, even in very small form factor or embedded systems.The PCIe FireWire card is equipped with two FireWire-800 ports and one FireWire-400 port. These ports are designed to support the latest external FireWire storage devices, offering data transfer speeds of up to 800 Mbps and 400 Mbps respectively. This ensures rapid and efficient data transfer, making it an ideal solution for high-speed data requirements.This adapter card is compliant with PCI Express Mini Card specification 1.2, ensuring compatibility with a wide range of systems. It also offers optional external power support, making it suitable for high-powered FireWire devices. The MPEX1394B3 is compliant with IEEE 1394b and is backward compatible with IEEE 1394a - 2000 as well as 1394-1995 standards. This ensures that it can work seamlessly with a wide range of FireWire devices, both old and new. Featuring Plug-and-Play functionality and hot-swap compatibility, this adapter card is easy to install and use. It is designed in a Mini PCI Express (Mini Card) form factor, making it suitable for use in the latest very small form factor computer systems, such as Mini-ITX or custom embedded solutions where a full-sized PCI Express card would not fit.Whether you're a system builder creating a small form factor HTPC with external FireWire storage or A/V equipment, or you're working on custom embedded systems with no room for full or even low profile PCI Express cards, the MPEX1394B3 3-Port Mini PCI Express FireWire Card Adapter offers a compact and reliable solution. Please note: Ensure your computer case has an available expansion card slot before purchasing this product.
StarTech 2 Port PCI Express RS232 Serial Adapter Card with 16950 UART
62.99 USD
Overcome connectivity challenges with the PEX2S950 2 Port PCI Express RS232 Serial Adapter Card with 16950 UART. This high-performance adapter card can be seamlessly installed into any available PCI Express slot, offering two robust 16C950 RS232 serial UART channels or ports. This makes it an ideal solution for integrating both modern and legacy serial devices, with the capacity to support data transfer rates of up to 460 Kbps. The 2 port RS232 serial card is designed for user-friendly installation and configuration, compatible with a wide array of Windows operating systems. It also features IRQ sharing and supports plug-and-play serial device connections, ensuring a smooth and hassle-free setup process. This dual-channel 16C950 UART is fully compatible with 16C550 type devices and boasts a maximum data transfer rate of 460 Kbps. It comes with a standard profile bracket installed, with optional low-profile brackets included for added flexibility. As a PCI Express 1x card, it's compatible with 1x, 2x, 4x, 8x, and 16x bus. The card also features a 128-byte deep FIFO per transmitter and receiver, automated in-band software flow control using programmable Xon/Xoff in both directions, and automated out-of-band hardware flow control using RTS / CTS and/or DSR / DTR. It's compliant with PCI 2.2 and PCI Power Management 1.0, ensuring efficient serial device performance. Whether you're in manufacturing, POS, consumer electronics, security, casino, environmental control, healthcare, hotel front desk, hospitality, or ISDN networking, this reliable and durable 2 Port PCI Express RS232 Serial Adapter Card with 16950 UART is a versatile solution for all your serial device connection needs.
StarTech 4 Port Gigabit Power Over Ethernet PCIe Network Card
324.99 USD
Enhance your network capabilities with the ST4000PEXPSE 4-Port Gigabit Power over Ethernet (PoE) PCIe Network Card. This high-quality and reliable network card allows you to add four Gigabit PoE ports through a single PCI Express slot, streamlining your network setup and reducing cable clutter. Each of the four ports can deliver up to 25.5W of power, seamlessly combining network data and power over a single Ethernet cable. This efficient system simplifies the setup of remote PoE devices, eliminating the need for separate power sources and data connections. This is particularly beneficial for devices such as IP cameras, IP phones, or wireless access points.Fully compliant with the IEEE 802.3at (Type 1 & 2) Power over Ethernet standards, this advanced network card can deliver up to 48V DC power to compliant Powered Devices (PD). It features four 10/100/1000 Mbps compatible PoE RJ45 ports and supports Power Sourcing Equipment (PSE) with up to 48V, 25.5 Watts max. output per port.The ST4000PEXPSE 4-Port PoE NIC also includes a built-in SATA and LP4 Molex power connector, and supports up to 9K Jumbo Frame. It also offers Wake-on-LAN (Remote Wake-up) support and supports Pair Swap, Polarity, and Skew Correction.Ideal for any standard profile PCIe-enabled client, server, or workstation, this durable PoE network card supports advanced features such as Jumbo Frames (up to 9KB), VLAN tagging, and Wake on LAN (WoL). This allows you to optimize network traffic and position your network devices where power outlets aren't available, with 25.5 Watts per-port PoE output.By utilizing existing standard Cat5 (or better) Ethernet cabling to deliver power and data, this network card helps reduce expenses and enables remote installation of touchscreens or information kiosks. It's also perfect for creating a host computer for networked security cameras situated in remote areas, or installing PoE-powered Wireless Access Points (WAP) or repeaters in industrial, warehousing, or business environments.
Netgear GS516UP 16-Port 380W Gigabit Ethernet Unmanaged Switch, 8P PoE+ & PoE++
369.99 USD
Are you looking for an advanced, high-tech solution to power and connect multiple devices in your small to medium-sized business or home office network The GS516UP 16-Port 380W Gigabit Ethernet Unmanaged Switch offers a sophisticated, powerful, and efficient networking solution with its 16 Gigabit Ethernet ports, including 8 high-power Ultra60 PoE++ and 8 PoE+ ports. This robust switch is designed for optimal performance and convenience, with a substantial total power budget of 380W to keep your essential devices such as wireless access points, IP cameras, and IP phones always-ready and operational.Experience the simplicity of plug-and-play functionality with this unmanaged switch, which requires no software installation or complex configuration. Its full performance is guaranteed by a non-blocking switching architecture, ensuring maximum throughput at wire speed for all your connected devices. The GS516UP is engineered with NETGEAR's unique PoE technology, which intelligently auto-balances and allocates power, delivering precisely what each device requires without any manual intervention.The hardware of the GS516UP is designed with silent operation in mind. Its fanless design ensures zero added noise, making it an unobtrusive addition to any setting, whether it's a quiet home office or a busy business environment. Energy efficiency is also a key feature of this switch, with a design that minimizes power usage, reducing operational costs.Built to last, the GS516UP is housed in a rugged metal casing, ensuring durability and longevity. It offers versatile mounting options, supporting both desktop and rackmount placement, with all necessary mounting hardware included. The standards-based design of this switch ensures interoperability with any compliant powered devices (PDs), providing you with a reliable and secure networking foundation.Instant networking is at your fingertips with the GS516UP's plug-and-play setup, which allows for immediate, reliable, and secure Internet connectivity. The convenience of Power-over-Ethernet (PoE) simplifies your network infrastructure by allowing a single cable to deliver both power and connectivity to each connected device. With 16 PoE++ ports, each capable of delivering up to 60W per port, your network's power distribution is both efficient and ample.Designed for zero-noise operation, the passively cooled fanless design of the GS516UP protects your business environment from unwanted noise, while also contributing to its energy-efficient operation. Each port on this switch utilizes only the power it needs, thanks to the intelligent auto-balancing feature, ensuring that your network is not only powerful but also smart in its energy consumption.Choose the GS516UP 16-Port 380W Gigabit Ethernet Unmanaged Switch for a seamless, powerful, and efficient networking experience that meets the sophisticated demands of today's connected world.
StarTech 4-port PCI Express RS232 Serial Adapter Card
137.99 USD
What you're looking at is a high-quality 4 Port Native PCIe RS232 Serial Adapter Card with 16950 UART. This reliable and durable device, based on the ASIX AX99100 chipset, provides four DB9 ports with bi-directional RS232 speeds reaching up to 921.6Kbps per port. It's an efficient solution for those seeking to connect multiple serial devices, such as printers, scanners, and other peripherals, to their computer.This user-friendly adapter card is an upgraded version of our popular Serial card PEX4S952, now offering an increased 256-byte FIFO buffer for smoother data transmission. It's designed to connect seamlessly to your computer's motherboard via a PCIe slot, providing a high-speed USB 2.0 interface.With compatibility across Windows, Linux, and Mac OS, this versatile adapter card is a perfect fit for a wide range of operating systems. Its high data transfer rate of up to 480 Mbps sets it apart from many alternatives on the market, making it an ideal choice for applications requiring rapid and reliable serial communication. Whether you're transferring large amounts of data or connecting multiple devices, this 4 Port Native PCIe RS232 Serial Adapter Card with 16950 UART is designed to deliver superior performance.
StarTech 2 Port Native PCI Express RS232 Serial Adapter Card with 16550 UART
55.99 USD
If you're looking to expand your computer's connectivity, the PEX2S553 PCI Express Serial Card is an essential addition to your hardware setup. This high-quality, durable 2-port serial adapter card transforms a single PCI Express slot into two RS232 (DB9) serial ports, offering a reliable solution for connecting a multitude of serial devices to your computer.Engineered with a native single-chip design that eliminates the need for a bridge chip, this efficient adapter card maximizes the high-speed potential of PCI Express (PCIe). It significantly reduces the load on the CPU by up to 48% compared to conventional serial cards, ensuring smoother and more stable performance.The RS232 Serial Adapter Card is designed with versatility in mind, showcasing broad compatibility with a wide array of operating systems, including Windows 2000/XP/2003/Vista/Windows 7/Server 2008 R2 (32 and 64 bit), Linux Kernel 2.6.11 and up, and MAC OS 10.4 and above. This makes it a user-friendly choice for professionals who require seamless integration with various platforms.Installation is made effortless with the inclusion of an optional half-height/low profile bracket, allowing for easy fitment in any sized computer case, whether it's a compact form factor or a full-sized tower. This product serves as an upgraded replacement for the PEX2S552 card, maintaining the legacy of quality and reliability.Key features of this efficient 2-port native PCI Express RS232 serial adapter card include:- Two high-speed RS232 serial ports capable of data transfer rates up to 460.8 Kbps, ensuring swift and efficient communication with serial devices.- Compliance with PCI Express base specifications revision 1.0a, guaranteeing a stable connection and reliable performance.- The inclusion of a half-height/low profile mounting bracket to accommodate various system form factors.- Selectable power output on pin 9 for the serial port, providing versatility for connected devices.- A 128-byte deep FIFO per transmitter and receiver, which minimizes the risk of data overflow and ensures smooth data flow.- Native single-chip, single-lane PCI Express integration for optimal throughput and reduced latency.- Automated out-of-band and in-band flow control using CTS/RTS, DSR/DTR, and programmable Xon/Xoff in both directions, which helps prevent data loss and ensures integrity during transmission.The PEX2S553 is not only easy to install but also comes with comprehensive step-by-step instructions, saving you time and hassle during setup. Its applications are vast, suitable for self-service automated machines, POS retail systems, bank teller workstations, standard ATMs, and control of multiple surveillance/security cameras, among others. This adapter card is the perfect solution for any application that requires reliable and efficient serial port communication.
StarTech 1 Port Poe RS232 Serial Ethernet Device Server
142.99 USD
The NETRS2321POE 1 Port RS232 Serial Ethernet Device Server - PoE (Power over Ethernet) is an innovative solution that allows seamless integration of your RS232 devices into your TCP/IP Ethernet WAN/LAN. This device gives you the convenience of accessing your RS232 devices as if they were right beside you, even when you're connecting over the Internet. Designed with versatility in mind, this Serial Device Server functions harmoniously with your integrated and add-on serial ports, as if they were directly installed in your computer. It's an ideal choice for a variety of applications, including industrial automation, security, Point of Sale, or any long-range serial application, ensuring reliable performance in any environment.One of the standout features of this Ethernet/serial device server is its support for PoE (Power over Ethernet). When connected to a PoE compliant device, it eliminates the need for an external power supply and outlet. This feature simplifies the positioning of the device server as per your needs.The NETRS2321POE 1 Port RS232 Serial Ethernet Device Server supports standard Ethernet or Power over Ethernet (POE) and a variety of protocols including UDP, IP, TCP, ICMP, HTTP, DHCP, and ARP-Ping. It's wall-mountable for easy installation and features an integrated 10/100Mbps RJ45 LAN port. With data transfer rates of up to 115.2 Kbps per port, it ensures efficient communication between your devices.The device server supports Auto Crossover (MDI/MDI-X) and is compatible with Windows 2000, XP 32bit, and Vista 32bit. The PoE support provides the flexibility to position your serial device where it's most needed, even when a power outlet is not available. The IP-based connection to your serial devices allows for remote administration from anywhere, even over the Internet. Whether you're in manufacturing, security, environmental control, POS, healthcare, or hospitality, the NETRS2321POE 1 Port RS232 Serial Ethernet Device Server is a reliable solution for connecting and managing your RS232 devices.
StarTech 1394 PCI Express FireWire Card Adapter
70.99 USD
Enhance your computer's connectivity with the 3 Port 2b 1a 1394 PCI Express FireWire Card Adapter. This high-quality and durable adapter is designed with a low-profile bracket, making it an ideal fit for small form factor PCs. It also includes an optional full-size bracket for seamless installation in standard-sized PC cases. The FireWire card can be effortlessly installed in a PCIe slot, adding two IEEE1394b (FireWire 800 - 9 pin) ports and one IEEE1394a (FireWire 400 - 6 pin) port to your system. This efficient and reliable adapter offers broad compatibility with a multitude of FireWire devices, including DV camcorders, external hard drives, and digital cameras, making it a versatile addition to your tech arsenal. The 3 Port 2b 1a 1394 PCI Express FireWire Card Adapter features a native (single chip) PCI Express chipset. This design ensures faster, more reliable, and cost-effective performance compared to expansion cards that utilize a "bridge" chip. With the ability to add three FireWire ports to a standard or small form factor (SFF) computer, this user-friendly adapter supports high-powered FireWire devices. Its native PCI Express chipset design guarantees a fast, reliable, and cost-effective FireWire expansion. Backed by a lifetime warranty and free lifetime technical support, the 3 Port 2b 1a 1394 PCI Express FireWire Card Adapter is a reliable solution for enhancing your computer's connectivity and boosting your productivity.
StarTech 2S1P PCI Express Serial Parallel Card with Breakout Cable
32.12 USD
Before diving into the details, let's introduce the PEX2S1P553B 2S1P PCI Express Serial Parallel Combo Card with Breakout Cable. This high-quality, durable card is designed to combine the functionality of both Parallel and Serial cards. It adds two RS232 serial ports and one parallel port through a single PCI Express (PCIe) slot, making it a reliable and compact solution for your connectivity needs.This user-friendly card is suitable for almost any computer, thanks to its low profile/half-height design. It also includes an optional full-height bracket for added versatility. The included breakout cable uses a single connector on the card to deliver three ports, effectively avoiding the crowded connections that can occur with fixed/static ports.The PEX2S1P553B card is compatible with a broad range of operating systems, including DOS, Windows 7/Server 2008 R2/Vista/XP/Server 2003/2000/98SE (32/64 bit), Linux, and Mac OS X. This ensures that it can seamlessly integrate into your existing setup, regardless of your operating system.One of the standout features of this card is its native single-chip design. This design not only provides improved speed and reliability but also reduces the CPU load by as much as 48% over conventional (bridge chip) cards. This makes it an ideal choice for those looking to optimize their system's performance.The card supports parallel data transfer rates up to 1.5 Mbps and serial data transfer rates up to 250 Kbps per port. It's compatible with the industrial standard 16C450/16C550 UART and supports (SPP), Enhanced Parallel Port (EPP), and Enhanced Capability Port(ECP). It's also PCI Express Base Specification 1.0a compliant and features an on-chip 256-byte depth FIFO in the transmit/receive path of each port.Whether you're looking to connect legacy parallel and serial devices like printers, scanners, ISDN terminal adapters, CD-R/RWs, Zip drives, and memory card readers, or you're in industries such as manufacturing, point-of-sale, healthcare, security, environmental control, entertainment, hospitality/restaurant, consumer, or ISDN Networking, the PEX2S1P553B 2S1P PCI Express Serial Parallel Combo Card with Breakout Cable is a versatile solution that can meet your needs.
StarTech 8 Port Unmanaged Industrial Gigabit Power over Ethernet Switch
333.99 USD
Be empowered with the IES81000POE 8-Port Gigabit Power over Ethernet Switch, a high-speed, efficient, and reliable solution for your networking needs. This user-friendly switch allows you to connect and power up to eight PoE-enabled devices, or a combination of PoE and non-PoE components, offering you the flexibility to position your equipment in areas where power outlets may not be readily available.Compliant with IEEE 802.3af and 802.3at standards, this robust switch delivers up to 30W per port, with a total power budget of 120W. It features 8 PoE+/ PSE (Power + Data) ports that are 10/100/1000Mbps compliant, ensuring high-speed data transfer for your devices. This unmanaged switch is designed to automatically sense whether the connected devices are PoE-ready or require data connectivity only. It also auto-negotiates between 10/100/1000 Mbps network speed and duplex, providing seamless integration with your existing network infrastructure.The IES81000POE 8-Port Gigabit Power over Ethernet Switch supports up to 52V, 30 Watts max output per port, and includes Over Current and Circuit Shorting protection for added safety. It is housed in a durable, wall-mountable metal enclosure, making it an ideal choice for industrial environments.The switch utilizes existing or standard Cat5 or better cabling, helping you reduce expenses by leveraging your existing network infrastructure. Its front panel LEDs provide quick indication of connection speed and status, simplifying network management.Whether you need to power a remote security camera, a Wireless Access Point (WAP) in a business environment, PoE supported VoIP phones, an intercom, paging or hallway speaker amplifier, or enable remote installation of touchscreens or information kiosks, this switch is the perfect solution. Enjoy the advantage of positioning your network devices where power outlets aren't available, with 30 Watts per-port from the switch, and experience durable performance in harsh environments with its sturdy steel construction.
Ubiquiti Networks UISP Long-Range PoE+ Gigabit Ethernet Adapter
29 USD
Long-range Gigabit Ethernet adapter that receives 802.3af/at PoE/PoE+ and offers passthrough PoE output.The Long-range Indoor/Outdoor Repeater (UACC LRE) is Gigabit adapter that allows you to easily and inexpensively expand your Ethernet network's range. With its (2) GbE RJ45 ports, the UACC LRE can receive 802.3af/at PoE/PoE+ while providing passthrough PoE output. You can also chain multiple UACC LRE adapters together to connect access points and cameras that are far away from your PoE switch. The UACC LRE also offers 10kA+ surge protection and works reliably in extreme temperatures (-40 to 80 Degree C) to protect your deployment from weather and electrical damage.
StarTech 7.1-Channel 24-bit 192 kHz PCI Express Sound Card with Header Bracket & 10-Pin Cable
83.99 USD
With this 7.1-channel PCIe sound card, you can create a high-quality home theatre sound system. It offers SPDIF input and output ports which deliver crystal-clear digital optical audio, for the ultimate listening experience.Versatile performanceThe versatile sound card can be used with a variety of audio devices. And with SPDIF digital optical or 3.5mm analog output, you don't need to worry about the connection types on your devices. You can output digital audio to your optical receiver or DAC, or analog audio to your sound system.
With up to 24-bit and 192KHz playback and recording, this 7.1 surround sound adapter card delivers high-definition audio for superb sound quality.
Simple installation
Unlike typical sound cards, this card is designed to fit in low-profile computers, making it ideal for home theatre personal computers (HTPC). It spans the multiple ports across a main card plus an innovative separate header bracket. The card is configured with standard profile brackets and includes low-profile (half-height) brackets.
The 7.1 channel surround sound card is easy to install. It's perfect for anyone looking for a simple solution to upgrade their listening experience, such as music enthusiasts or mixing professionals.Multiple input options
For added scalability, you can quickly connect a microphone or other recording devices to your computer through two 3.5mm stereo or SPDIF digital audio input jacks.
The PEXSOUND7CH is backed by a StarTech.com 2-year warranty and free lifetime technical support.
StarTech 4 Port RS232 PCI Express Serial Card with Breakout Cable
119.99 USD
For professionals seeking a reliable and efficient solution to connect multiple devices, the PEX4S553B 4-Port RS232 PCI Express Serial Card with Breakout Cable is an ideal choice. This high-quality serial card allows you to add four RS232 serial ports using a single PCIe expansion slot, making it a versatile addition to your setup. The product comes with a 1-to-4 cable, enabling you to add four serial ports to a single low-profile slot. This user-friendly design makes it easy to connect a variety of devices, including printers, scanners, and other peripherals. One of the standout features of this durable serial card is its native single-chip design. This unique design ensures optimal reliability and speed, reducing the CPU load by up to 48% compared to conventional bridge-chip serial cards. This makes it a cost-effective solution for connecting legacy serial devices to PCIe-enabled computers.The multi-port serial adapter includes both full profile and low profile/half-height brackets, ensuring compatibility with standard and small form factor computers. It supports a broad range of operating systems, including Windows, Linux, and MAC OS, further enhancing its versatility.The PEX4S553B 4-Port RS232 PCI Express Serial Card with Breakout Cable supports data transfer rates of up to 250Kbps on each port, making it suitable for applications that require high-speed data transfer. It is compliant with PCI Express base specifications revision 1.0a and supports both hardware and software flow control.The breakout cable design means that only one expansion slot is needed to add four additional serial ports to any system. This makes it an ideal solution for a variety of applications, including point-of-sale systems, manufacturing equipment, environmental control systems, entertainment systems, healthcare equipment, security systems, hospitality/restaurant equipment, consumer devices, and ISDN networking. Please note that this product is a replacement for the PEX4S552B card.
StarTech 6 Port Unmanaged Industrial Gigabit Ethernet Switch
389.99 USD
With the IES61002POE 6-Port Industrial PoE+ switch, you can seamlessly connect Gigabit Ethernet data and power to four PoE-enabled devices, with the added convenience of two extra GbE ports. This industrial Ethernet switch is fully compliant with IEEE 802.3at / 802.3af standards, offering up to 30 Watts output per port through its four PoE+ / PSE ports. All six of the shielded RJ45 ports support auto-negotiation of speed and duplex for 10/100/1000Mbps Ethernet networks, ensuring optimal network performance. This switch features four PoE+/ PSE (Power + Data) Gigabit IEEE 802.3at / 802.3af compliant ports, along with two additional GbE ports, providing a robust solution for your networking needs.The switch supports up to 55V, with a maximum output of 30 Watts per PoE port. It also features redundant power inputs via a 24/48V DC terminal block with an alarm relay, ensuring continuous operation even in the event of power dips or failures. The wide-range 20-57V DC power input and the DC to DC 24V step-up converter provide flexibility and reliability in power supply.Designed for harsh environments, this industrial Ethernet switch operates within a wide temperature range of -40deg.C to 75deg.C (-40deg.F to 167deg.F). Its rugged IP-30 rated metal enclosure ensures durability and longevity, making it an ideal choice for industrial, manufacturing, and warehousing environments.The switch also includes both DIN-Rail and wall-mount brackets, offering flexible installation options to suit your specific needs. Whether you need to power a remote security/network camera, install PoE-powered Wireless Access Points (WAP), or enable remote installation of touchscreens or information kiosks, this industrial PoE+ switch provides a reliable and efficient solution.
StarTech PCI Express AC1200 Dual Band Wireless AC Network Adapter
98.99 USD
When you're seeking to enhance your desktop computer's wireless connectivity, the StarTech PCI Express AC1200 Wireless Network Adapter is a top-tier choice. This device, designed to fit seamlessly into a PCIe slot, provides robust dual-band Wireless-AC connectivity, making it an ideal solution for both office and home wireless networks. When paired with an 802.11ac router, this Wireless-AC adapter delivers exceptional speed and range, meeting the growing demands of today's network resources. The dual-band Wi-Fi adapter is engineered to support maximum data transfer rates of up to 867 Mbps on the 5GHz band, which is three times the speed of a standard Wireless-N. Additionally, it can support up to 300 Mbps on the 2.4GHz band. This high-speed capability makes the StarTech PCI Express AC1200 Wireless Network Adapter perfect for bandwidth-intensive applications such as HD video streaming, online conferencing, large file transfers, and high-performance gaming. The adapter features a versatile 2T2R (2 transmitter, 2 receiver) detachable antenna design. Included with the adapter is a magnetic antenna stand that can be conveniently mounted to the top or side of your PC case. The controller card comes equipped with a standard profile bracket and also includes a low-profile/half-height bracket, making it suitable for installation in small form-factor computers. To ensure compatibility with all your networking devices, the adapter is backward compatible with 802.11a/b/g/n networks. In summary, the StarTech PCI Express AC1200 Wireless Network Adapter offers a powerful and versatile solution for upgrading your computer's wireless connectivity.
StarTech 5 Port Unmanaged Industrial Gigabit Ethernet Switch
203.99 USD
Be empowered with the IES51000 5-Port Industrial Ethernet Switch, a high-speed, reliable, and efficient networking solution designed for demanding industrial environments. This durable switch boasts 5 Gigabit Ethernet ports housed in a compact, IP30-rated metal enclosure, making it perfectly suited for challenging conditions found on factory floors, in warehouses, or within large junction boxes. Experience seamless connectivity with minimal configuration. This user-friendly, unmanaged industrial network switch supports 10/100/1000 Mbps transfer speeds, full/half-duplex auto-negotiation, jumbo frames, and autoMDI/MDIX. These features collectively eliminate the need for troubleshooting mismatched speed and duplex settings, ensuring a smooth and efficient networking experience. The IES51000 switch is equipped with five 10/100/1000 Mbps unmanaged RJ45 Ethernet ports, providing ample bandwidth for high-demand applications. Its IP30-rated DIN rail and wall-mountable metal enclosure ensures durability and flexibility in installation. For uninterrupted operation, the switch features wide-range redundant power via two 12-58V DC terminal block inputs, complete with an alarm relay. This ensures seamless operation even in the event of power dips or failures, minimizing unnecessary downtime. When used with two power sources, the switch supports alarm relay contacts that can be wired to your existing alarm circuit, providing instant notification when a power disruption occurs. Designed for optimal performance in harsh environments, the switch can be DIN Rail or wall-mounted. Its compact, IP30-rated enclosure withstands an extended operating temperature range (-40deg.C to 75deg.C). Ideal for industrial applications such as warehouses and junction boxes without temperature control, the IES51000 switch is also suitable for enhancing Gigabit Ethernet on factory or manufacturing floors, and for integrating small workgroups into an existing network. Its robust design and redundant power inputs ensure seamless performance even in harsh industrial conditions, while its flexible installation options allow you to position the switch exactly where you need it. Note: This product is backed by a StarTech 2-year warranty and free lifetime technical support.
TRENDnet TPE-TG44G 8-Port Gigabit GREENnet PoE+ Switch
87.26 USD
The TRENDnet TPE-TG44G 8-Port Gigabit GREENnet PoE+ Switch reduces equipment and installation costs by delivering data and power over existing Ethernet cables. This unmanaged switch offers four Gigabit PoE+ and four Gigabit non-PoE ports. The PoE+ standard supplies up to 30 watts of power per port for devices such as high power wireless access points, PTZ (Pan / Tilt / Zoom) internet cameras and VoIP telephony systems.Auto sensing technology delivers 30 watts to 802.3at PoE+ devices (up to 2 devices), 15 watts to 802.3af PoE devices (up to 4 devices) and only data to non-PoE devices. GREENnet technology reduces energy consumption by up to 75% when the switch is not in use. It boost office efficiency and reduce network congestion with a total switching capacity of 16 Gbps. LED indicators display device status for efficient troubleshooting. This switch comes in a sturdy metal case and quickly adds PoE+, PoE and non-PoE devices to your network.
Netgear MS510TXUP 295W 8-Port Multi-Gigabit Ultra60 PoE++ Managed Smart Switch
749.99 USD
Find the perfect solution for your network needs with the MS510TXUP 295W 8-Port Multi-Gigabit Ultra60 PoE++ Managed Smart Switch with SFP+. This advanced switch offers a high-speed, multi-gigabit Ethernet connection with a transfer rate of up to 10Gbps. With 8 ports, it provides a mix of 1G, 2.5G, 5G, and 10G connections, ensuring optimal performance for all your devices.This smart switch is designed with enterprise-level features, including Quality of Service (QoS) and advanced security measures. The QoS functionality allows for traffic prioritization based on WRR, strict priority, or both, ensuring smooth and efficient data flow. The switch also supports TCP/UDP-based QoS, DiffServ, and DSCP, providing comprehensive traffic management options.Security is a top priority with this switch, offering features like MAC lockdown, IEEE 802.1x port authentication, Dynamic VLAN Assignment, and TACACS+. These features help protect your network from cyber threats and unauthorized access.The MS510TXUP also supports Power over Ethernet Plus (PoE++), providing power to devices like VoIP phones, IP cameras, and wireless access points through the Ethernet cable, simplifying your network setup. With a maximum power budget of 295W, it can power multiple devices simultaneously.This switch is also equipped with two dedicated 10 Gigabit fiber ports for WiFi 6 AP connectivity, IP surveillance, and mobility. It includes a 1-year subscription to Insight Premium or Pro, giving you access to the Insight mobile app or Insight Cloud Portal for easy remote management.The MS510TXUP 295W 8-Port Multi-Gigabit Ultra60 PoE++ Managed Smart Switch with SFP+ is designed for both desktop and rackmount environments, making it a versatile choice for any network setup. With its advanced features and high-speed performance, it's an excellent choice for businesses looking to optimize their network performance.
Cisco Systems Catalyst C1300-24P-4X 24-Port Gigabit PoE+ Managed Network Switch
1290.47 USD
Overcome network challenges with the Cisco Catalyst C1300-24P-4X 24-Port Gigabit PoE+ Compliant Managed Network Switch, a robust solution tailored for small to medium-sized businesses and branch offices. As part of the Cisco Catalyst 1300 Series, this enterprise-class Gigabit Ethernet Layer 3 switch is engineered to deliver simplicity, flexibility, and security, making it an ideal choice for deployment beyond the traditional wiring closet.Operating on a customized Linux OS, the Catalyst 1300 Series features an intuitive dashboard that streamlines network setup and management. This switch is designed to accelerate digital transformation while ensuring pervasive security to protect business-critical transactions. It offers an optimal blend of affordability and advanced capabilities, supporting the creation of a more efficient and connected workforce.Whether your business requires a high-performance network for employee connectivity or a comprehensive solution for data, voice, and video services, the Cisco Catalyst 1300 Series meets diverse networking needs. It excels in various deployment scenarios, including secure office connectivity, unified communications, and highly secure guest access. With high performance and reliable connectivity, it enhances file transfers, data processing, and network uptime, keeping employees productive.The Catalyst 1300 Series is a managed network solution that provides the performance and traffic-handling intelligence necessary for unified communications. It integrates seamlessly with Cisco's portfolio of IP telephony and unified communications products, ensuring compatibility and ease of integration for a complete business solution.Security is paramount, and the Catalyst 1300 Series delivers with advanced features like IEEE 802.1X, port security, and web-based authentication, which limit network access and protect against unauthorized users. The switch also includes dynamic ARP inspection, IP Source Guard, and DHCP snooping to thwart deliberate network attacks. IPv6 First Hop Security further extends protection against address spoofing and man-in-the-middle attacks.The switch supports up to 48 Power over Ethernet (PoE) ports, simplifying the deployment of IP telephony, wireless, and IP surveillance technologies by powering network endpoints over a single Ethernet cable. This reduces the need for separate power supplies, facilitating quicker and more cost-effective technology rollouts.With support for both IPv4 and IPv6, the Catalyst 1300 Series ensures your network is future-ready, accommodating the growing number of network devices while maintaining compatibility with existing applications. Advanced Layer 3 traffic management capabilities, including dynamic routing and VLAN communication, enhance network efficiency by offloading internal traffic tasks from routers.The Cisco Catalyst 1300 Series also features Front Panel Stacking, allowing up to eight switches to be managed as a single unit with a unified data,...
Elation NS8 8-Port 100W Gigabit Ethernet POE Network Switch
590 USD
Let the Elation NS8 8-Port 100W Gigabit Ethernet POE Network Switch revolutionize your network setup with its robust features and exceptional performance. This compact yet powerful network switch is equipped with 8 Gigabit Ethernet ports, each supporting PoE+ (Power over Ethernet Plus), making it an ideal choice for distributing both data and power efficiently to NETRON nodes or any PoE-compatible network devices. With a substantial total power budget of 100W, the NS8 ensures that your network appliances receive the necessary power for optimal operation.Engineered to handle the high data volumes typical in modern lighting systems, the NETRON NS8 excels in processing and distributing a wide range of entertainment protocols seamlessly. This ensures instantaneous response times and flawless execution, crucial for live productions and installations. Its rugged housing is designed to withstand the demands of various environments, offering flexible mounting options to suit any scenario. Whether you need rack, truss, DIN-rail, or wall mounting, the NS8 provides the versatility required for any professional setup. Enhance your network infrastructure with the Elation NS8 and experience unparalleled reliability and performance.
StarTech 2m SFP+ 10-Gigabit Ethernet Passive Twinax Direct Attach Cable, 30 AWG
44.99 USD
Bring high-speed connectivity to your network with the SFPCMM2M Cisco Compatible 2m SFP+ cable. This direct attach cable is fully hot pluggable and supports 10 Gigabit Ethernet and Fiber Channel applications through its Small Form Factor Pluggable (SFP+) ports. Engineered for short length, high-speed interconnects, this 30 AWG, 100 Ohm impedance Twinax cable offers low power consumption and low latency. It's a cost-effective alternative to fiber optic cable assemblies, designed specifically for short distance applications. This makes it ideal for point-to-point in-rack and across rack network switch/server connections. This 10GBASE-CU SFP+ Cable is compliant with MSA (Multi-Source Agreement) standards, ensuring its reliability as a replacement for the SFP-H10GB-CU2M cable. It's compatible with Cisco equipment and compliant with SFF 8431 connector standards. With support for multi-gigabit data rates up to 10.5Gbps, this cable is capable of handling 1x, 2x, 4x, and 8x Fiber Channel data rates. It's hot-swappable with fiber optic modules and features quick release latching SFP+ connectors for easy installation and removal. Whether you're setting up a Storage Area Network (SAN), Network Attached Storage (NAS), or storage servers, this SFP+ cable is a cost-effective solution that guarantees reliability and high performance.