StarTech 10/100 Mbps Multi Mode ST Fiber Media Converter
95.99 USD
Explore the detailed sheet with complete information, compare prices and identify the features of StarTech 10/100 Mbps Multi Mode ST Fiber Media Converter, available at the cost of 95.99 USD; it belongs to the Network Accessories category; the seller is StarTech 10/100 Mbps Multi Mode ST Fiber Media Converter and the manufacturer is StarTech.
Take your networking capabilities to the next level with our high-speed 10/100 Mbps Multi Mode ST Fiber Media Converter. Engineered to extend a Fast Ethernet network (10/100 Mbps) over multi-mode fiber, this device can effortlessly bridge distances of up to 2km (1.2 miles). This makes it an ideal solution for connecting remote network segments over a 100Base-FX fiber backbone, thereby enhancing your network's reach and flexibility.Our Multi Mode ST Fiber Media Converter is designed with durability in mind, featuring a rugged all-steel chassis that can withstand harsh environments. It offers a simple plug-and-play installation process with minimal configuration required, making it a user-friendly choice for both professionals and beginners. This versatile fiber media converter supports standalone operation, but can also be seamlessly installed into the 20 Slot, 2U Rackmount Chassis (ETCHS2U) for added convenience. It supports both full and half-duplex operation, ensuring reliable and efficient data transfer.Advanced features such as link-loss forwarding and remote monitor status are incorporated to ensure maximum uptime. The converter can support a maximum fiber cable length of 2km, making it a cost-effective solution for extending or bridging networks using fiber cabling.Whether you need to provide connectivity to an isolated area of a large complex, connect traffic control systems at extreme distances to the main office, or extend network connectivity to remote areas of stadiums, auditoriums, or other venues, our 10/100 Mbps Multi Mode ST Fiber Media Converter is the perfect solution. It's also ideal for secure connections required by government agencies where EMI is not acceptable. In essence, this device is not just a converter; it's a versatile tool that converts 100Base-FX fiber optic signals to 10/100Base-T Ethernet over multi-mode fiber cable, enhancing your network's performance and reach.
EAN: 0065030846257
Shipping Cost: 0 USD
Availability: pre order
Condition: new
Take your networking capabilities to the next level with our high-speed 10/100 Mbps Multi Mode ST Fiber Media Converter. Engineered to extend a Fast Ethernet network (10/100 Mbps) over multi-mode fiber, this device can effortlessly bridge distances of up to 2km (1.2 miles). This makes it an ideal solution for connecting remote network segments over a 100Base-FX fiber backbone, thereby enhancing your network's reach and flexibility.Our Multi Mode ST Fiber Media Converter is designed with durability in mind, featuring a rugged all-steel chassis that can withstand harsh environments. It offers a simple plug-and-play installation process with minimal configuration required, making it a user-friendly choice for both professionals and beginners. This versatile fiber media converter supports standalone operation, but can also be seamlessly installed into the 20 Slot, 2U Rackmount Chassis (ETCHS2U) for added convenience. It supports both full and half-duplex operation, ensuring reliable and efficient data transfer.Advanced features such as link-loss forwarding and remote monitor status are incorporated to ensure maximum uptime. The converter can support a maximum fiber cable length of 2km, making it a cost-effective solution for extending or bridging networks using fiber cabling.Whether you need to provide connectivity to an isolated area of a large complex, connect traffic control systems at extreme distances to the main office, or extend network connectivity to remote areas of stadiums, auditoriums, or other venues, our 10/100 Mbps Multi Mode ST Fiber Media Converter is the perfect solution. It's also ideal for secure connections required by government agencies where EMI is not acceptable. In essence, this device is not just a converter; it's a versatile tool that converts 100Base-FX fiber optic signals to 10/100Base-T Ethernet over multi-mode fiber cable, enhancing your network's performance and reach.
EAN: 0065030846257
Shipping Cost: 0 USD
Availability: pre order
Condition: new
Compare Similar Products
StarTech USB 2.0 to 10/100Mbps Ethernet Network Adapter Dongle
26.99 USD
The USB2100 USB 2.0 to 10/100 Mbps Ethernet Network Adapter Dongle is a high-speed, durable, and reliable solution for enhancing your device's connectivity. Engineered to provide a Fast Ethernet port to your laptop or desktop computer via USB, this adapter is compatible with both USB 2.0 and 10/100Mbps Ethernet networks, ensuring broad usability across various devices and networks.This compact and easy-to-use USB network adapter boasts a convenient dongle design with a built-in cable, effectively eliminating cramped connections. It's an ideal solution for augmenting wired Ethernet connectivity to your desktop without the need to open the case, or as a reliable replacement for a failed onboard network adapter on your laptop system.Offering both half and full-duplex operation, this USB 2.0 Ethernet adapter supports high-speed data transfer rates of up to 200 Mbps, ensuring smooth and efficient network performance. Moreover, it comes equipped with advanced features such as Wake-on-LAN (WoL) and VLAN tagging, providing added flexibility and enhancing your networking capabilities.In conclusion, the USB2100 USB 2.0 to 10/100 Mbps Ethernet Network Adapter Dongle is a robust and versatile solution for your networking needs, providing reliable, high-speed connectivity with the convenience of a plug-and-play dongle design.
StarTech Gigabit 850nm Multi Mode SFP LC Fiber Optical Transceiver
64.95 USD
The SFPSXMM Gigabit 850nm Multi Mode SFP Fiber Optical Transceiver - LC 550m is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to increase performance and connectivity of your fiber-connected network devices.Using a short wavelength (850nm) VCSEL laser diode, enabling a maximum cable distance of 550m (0.3 miles) over multi mode fiber, this Small Form Factor Pluggable (SFP) Gigabit Multi Mode module can be installed into any fiber networking devices with an MSA compliant SFP port, providing a simple solution to upgrade existing network devices to connect to remote locations using LC terminated multimode fiber.Delivering convenience and scalability, the optical transceiver allows you to install the multimode LC module without interrupting network traffic or requiring a device reboot. Backed by a StarTech 2-year warranty and free lifetime technical support.• 1.25Gbps IEEE 802.3z 1000BASE-SX Compliant • Complies with SFP Multi-Source Agreements standards (MSA) • Equipped with a 850nm VCSEL Laser with Class 1 laser safety standards IEC825 compliance • Duplex LC receptacle connector • Complies with 1.0625Gbps Fiber Channel FC-PI 100-M5-SN-I and FC-PI 100-M6-SN-I • Serial ID functionality support • Fully Hot Pluggable Advantage • Fully compliant with MSA standards, this hot pluggable module can be installed into any networking device with an MSA compliant port • Equipped with an industry standard multimode LC interface, this module can extend your network connectivity up to 550m away Applications • Perfect for network extension and fiber backbones • Replacing defective or damaged SFPs in MSA compliant equipment • Use in Multimode fiber installations • Expand your network to remote segments over fiber
Ubiquiti Networks 10Gbps SFP+ Multi-Mode U Fiber Module, 2x LC, 20 Pack
462.99 USD
Ubiquiti Networks offers a variety of U Fiber modules to suit your fiber connectivity applications. Indoor Runs For convenient multi-mode connections that extend beyond the 100-meter limitation of Ethernet cabling, use the UF-MM-10G-20 for distances of up to 300m and speeds of up to 10 Gbps.
StarTech 1 Port 10/100 Mbps Ethernet Parallel Network Print Server, Beige
106.99 USD
While maintaining a compact and lightweight design, the PM1115P2 Ethernet to Parallel Network Print Server seamlessly transforms a standard parallel printer into a shared network resource over a 10/100Mbps network. This reliable and efficient device provides network printing access, enabling multiple network-connected computers to utilize a single printer. This eliminates the need for individual printers at each workstation, saving both costs and space.This high-quality print server connects directly to the Centronics port of your printer, offering a discreet solution that doesn't require a cable between your printer and the device. Instead, it simply connects to the network using an RJ45 cable. This flexibility allows you to position your printer anywhere on the network, eliminating the need for a dedicated print server PC and preventing potential performance bottlenecks.The PM1115P2 Ethernet to Parallel Network Print Server is user-friendly, with an easy-to-use web interface or Windows-based configuration and setup. It can have you up and running in minutes, thanks to its remote web-based or Windows-based installation wizard. This durable print server is compliant with IEEE 802.3 and IEEE 802.3u standards, ensuring its compatibility with a wide range of parallel printing devices. It supports SNMP for remote printer management, working seamlessly with most SNMP-based applications. It also supports Internet Printing Protocol (IPP), Print Job Control/Status, Email Alert, Rendezvous, DHCP Client, SNMP (v1 and 2) & HP Web JetAdmin, and Windows Print Monitor Technology.Ideal for use in education and government institutions, this server is a convenient network printing solution that can convert a standard parallel printer into a standalone network printer. It allows multiple network-connected computers to share a single printer, eliminating the performance issues associated with a dedicated PC acting as the printer server. In summary, the PM1115P2 Ethernet to Parallel Network Print Server is a versatile, efficient, and cost-effective solution for network printing needs.
Ubiquiti Networks 10Gbps LC Multi-Mode SFP+ Optical Transceiver, 2-Pack
38 USD
SFP+ transceiver that supports 10G connections up to 300m using multi-mode fiber with a duplex LC UPC connector.Warning: CLASS 1 LASER PRODUCT, IEC/EN 60825-1:2014 - Do not look into the ends of the fiber optic cable or SFP module while converters are powered.
StarTech 10/100Mbps Ethernet to USB 2.0 Network LPR Print Server
70.99 USD
An essential tool for collaborative environments, the 10/100Mbps Ethernet to USB 2.0 Network LPR Print Server offers a seamless and efficient way to connect a USB printer to your network. This compact, high-speed device is engineered to facilitate shared printer access for multiple users, making it an ideal solution for home offices, small businesses, educational institutions, and government agencies where printer sharing is necessary.Experience the convenience of network printing without the clutter. With this user-friendly print server, you can effortlessly share a single USB printer across your network, enabling print jobs from any networked computer, whether it's located across the room or across the globe. The device ensures a stable and reliable Ethernet connection, featuring 10Base-T/100Base-TX auto-sensing to adjust to the optimal network speed.Compliant with USB 2.0 standards, this print server is compatible with a broad range of standard printers, ensuring a versatile and future-proof solution. Its efficient design allows for easy configuration through a Windows-based setup program or via web-based management, providing a straightforward installation process.The server supports LPR network printing and Bonjour Print Services, streamlining the process of Internet printing and network printer discovery. With full-duplex support, jumbo frame support, and Auto MDI-X support, it delivers robust functionality in a compact and durable form factor.Designed for practicality, the print server's compact housing allows for placement in any convenient shared location, liberating you from the need to station your printer directly beside your computer. This flexibility enhances your workflow and space management by centralizing printer access.In summary, this Ethernet to USB network print server is a reliable, cost-efficient solution for network printing that caters to the needs of multiple users. Its easy installation, broad device compatibility, and robust management features make it a smart choice for any setting that requires shared printer access without sacrificing performance or space.
Ubiquiti Networks 10Gbps LC Multi-Mode SFP+ Optical Transceiver, 20-Pack
360 USD
SFP+ transceiver that supports 10G connections up to 300 m using multi-mode fiber with a duplex LC UPC connector.Warning: CLASS 1 LASER PRODUCT, IEC/EN 60825-1:2014 - Do not look into the ends of the fiber optic cable or SFP module while converters are powered.
Ubiquiti Networks 10Gbps LC Multi-Mode SFP+ Optical Transceiver
20 USD
SFP+ transceiver that supports 10G connections up to 300 m using multi-mode fiber with a duplex LC UPC connector.Warning: CLASS 1 LASER PRODUCT, IEC/EN 60825-1:2014 - Do not look into the ends of the fiber optic cable or SFP module while converters are powered.
Ubiquiti Networks 1Gbps SFP LC Multi-Mode Optical Transceiver, 20-Pack
150 USD
SFP transceiver that supports 1G connections up to 550 m using multi-mode fiber with a duplex LC UPC connector.Warning: CLASS 1 LASER PRODUCT, IEC/EN 60825-1:2014 - Do not look into the ends of the fiber optic cable or SFP module while converters are powered.
Muxlab 4K UHD HDMI/ST2110 Over IP Uncompressed Multi-Mode Fiber Receiver
2086 USD
The HDMI 4K/ST2110 over IP Uncompressed Gateway Converter supports the ST-2110 AV over IP protocol standard for Broadcast applications. The unit allows lower cost HDMI 4K equipment to be utilized in a broadcast environment, while extending end point source and sink devices at up to 1300ft (400m) via duplex multimode OM4 fiber with LC connectors, at up to 4K resolution @ 30Hz uncompressed (4K 4:4:4 8 bit and 4K 4:2:2 10 bit), in a point-to-point configuration. Pointto-multipoint and multipoint-to-multipoint configurations are also supported by connecting several units to a 10G Ethernet network.The device supports ST-2022-7 (Class D) Redundancy for critical fail-safe applications allowing the audio/video signal to run over two independent 10G Ethernet Networks. The unit provides a 1G Ethernet Network port for control via 3rd party management platforms supporting a RestAPI, or NMOS (IS-04 for discovery and IS-05 for connectivity management). The HDMI 4K/ST2110 over IP Uncompressed Gateway Converter also supports an RS232 port for remote control of end devices (TX side).Applications• Commercial broadcast AV systems• News/sports/TV stations• Movie networks
StarTech 1.25 Gbps Fiber SFP Single Mode Transceiver with LC Duplex Connector
65.99 USD
It's the SFPG1320C Cisco Compatible Gigabit Fiber SFP Transceiver Module SM LC, designed to seamlessly integrate with your existing fiber networking equipment or fiber media converter. This high-speed, reliable transceiver module is built in compliance with MSA (Multi-Sourcing Agreement) standards, making it a cost-effective solution for enhancing, replacing, or upgrading a Single-Mode LC port. With its advanced technology, this transceiver module supports data transfer rates of up to 1.25 Gbps, ensuring efficient data transmission for applications such as video streaming, online gaming, or large file transfers. It also features Digital Diagnostics Monitoring (DDM), providing real-time data on the status and performance of the network. This durable LC SFP/Mini-GBIC module can be installed into any fiber networking device with an MSA or Cisco compliant SFP port, offering wide compatibility with various networking equipment, including routers, switches, and firewalls. It supports distances up to 20 km (12.4 miles), making it ideal for transmitting data over long distances without signal degradation. The SFPG1320C Cisco Compatible Gigabit Fiber SFP Transceiver Module SM LC is equipped with an LC Fiber connector and is fully hot-pluggable. This feature allows for easy installation of the module without interrupting network traffic or requiring a device reboot, delivering both convenience and scalability. This 1310nm single-mode SFP module is compatible with Cisco equipment, making it a versatile choice for businesses or individuals looking to upgrade their network infrastructure. Whether you're replacing defective or damaged SFPs/Mini GBICs in MSA compliant or Cisco equipment, or expanding your network to remote segments, this transceiver module offers a reliable and efficient solution.
Ubiquiti Networks 25Gbps SFP28 LC Multi-Mode Optical Transceiver
49 USD
SFP28 transceiver that supports 25G connections up to 100 m using multi-mode fiber with a duplex LC UPC connector.Warning: CLASS 1 LASER PRODUCT, IEC/EN 60825-1:2014 - Do not look into the ends of the fiber optic cable or SFP module while converters are powered.
StarTech Dual Port PCI Express Gigabit Ethernet PoE/PSE Network Card Adapter
170.99 USD
The ST2000PEXPSE Dual Port PoE NIC provides two 10/100/1000 Mbps PoE RJ45 ports that can provide up to 25.5W of power each, combining a network data connection and power on a single cable, for less clutter and convenient installations in remote locations. This full/low profile Gigabit server adapter supports the IEEE 802.3at (Type 1 and 2) standard for a Power Sourcing Equipment (PSE) device and can deliver 48V DC power to compliant Powered Devices (PD).• Dual 10/100/1000 Mbps PoE RJ45 ports • Supports IEEE 802.3at (Type 1, 2) Power over Ethernet standard • Power Sourcing Equipment (PSE) design, provides data and up to 25.5W of power on each port • Built-in SATA and LP4 Molex power connector • Unique surge protection design helps prevent system damage in the event of lightning strikes • Jumbo Frame support • On-chip 48 KB Big Transmit/Receive Buffer Support • Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and supports IEEE 802.1Q VLAN tagging, • IEEE 802.1P Layer 2 Priority Encoding and IEEE 802.3x Full Duplex Flow Control • Crossover Detection & Auto-Correction (Auto MDIX) • Includes full and low profile/half-height installation brackets This eliminates the need for a separate power source and cable for remote networked devices such as IP cameras, IP phones and wireless access points. Suitable for any PCI Express-enabled client, server or workstation, this versatile PoE network adapter supports features such as Jumbo Frames, VLAN tagging and Wake on LAN (WOL). The ST2000PEXPSE PoE NIC is backed by a StarTech 2-year warranty and free lifetime technical support. Applications • Provide power to PoE powered devices, where they have no access to a power source • Add 2 Ethernet ports to a workstation or server computer from a single PCIe slot • Connect to 2 separate networks simultaneously • Install dual networking capabilities into a small form factor or other space-constrained computer system • Connecting Power over Ethernet-enabled IP cameras, IP phones or Wireless Access Points Advantage • Reduces cable clutter and makes it easier to install devices in remote locations that are powered by the the PSE network card, with up to 25.5W of power delivery as well as a solid network link over a single cable connection • Suitable for installation in full profile or small form factor computer cases using the included half-height/low profile bracket, adding two network connection ports using a single PCI Express slot • Provides versatile network connections with support for advanced features such as Jumbo Frames and VLAN tagging, as well as Wake-On-LAN and Auto MDIX
Ubiquiti Networks Ubiquiti Instant 802.3af Indoor Gigabit PoE Converter
20 USD
An essential tool for enhancing your network infrastructure, the Ubiquiti Networks Instant 802.3af Indoor Gigabit PoE Converter transforms any Ubiquiti UniFi, UniFi Video, or airMAX 24V PoE device into a fully compliant 802.3af-compatible product. This converter is designed to work seamlessly with 10/100/1000 Mbps ports, ensuring high throughput speeds for your wired connections, making it an ideal choice for environments demanding reliable and fast data transfer.The Instant 802.3af Gigabit PoE Converter is engineered for compatibility with a wide range of auto-sensing 802.3af PoE switches, allowing for efficient remote power control applications. This feature enables network administrators to conveniently power or power cycle remote devices directly from an 802.3af switch, streamlining network management and monitoring. For enhanced power management, centralize your 802.3af switch and power source, and consider integrating a UPS (Uninterruptible Power Supply) to maintain network functionality during power outages.Available in both indoor and outdoor versions, this versatile converter supports Ubiquiti UniFi, UniFi Video, and airMAX 24V PoE devices using either 100 Mbps or Gigabit Ethernet ports. Its ability to facilitate longer cable runs is a significant advantage, as it delivers power more efficiently through high voltage, reducing current requirements. This ensures that your devices receive the necessary power even when situated far from the 802.3af switch.Furthermore, the Instant 802.3af Gigabit PoE Converter offers robust ESD and surge protection, providing an additional +/-15kV of Ethernet isolation. This built-in protection minimizes the risk of electrostatic discharge or surge damage, safeguarding your valuable network equipment. Enhance your network's efficiency and reliability with the Ubiquiti Networks Instant 802.3af Indoor Gigabit PoE Converter, a vital component for any advanced networking setup.
Ubiquiti Networks 100Gbps QSFP28 SR4 Multi-Mode Optical Transceiver
69 USD
QSFP28 transceiver that supports 100G connections up to 100 m using multi-mode fiber with an MPO-12 Type B UPC connector.
BSS Single Mode Fiber Optic Media Converter
2496 USD
Just imagine the power and reliability of the MC-1 Gigabit Media Converter, an advanced tool designed to transport data up to 10 km (6.2 miles) using 1310nm single mode fiber cable. This high-quality, innovative device is typically deployed at each end of a two-conductor single mode fiber optic cable, bridging the gap between two equipment rack locations with ease and efficiency. The MC-1 is more than just a media converter; it's a sophisticated solution for your audio, video, or data distribution needs. Whether you're working with CCTV, security systems, or audio/visual installations, this reliable device ensures minimal signal loss over long distances, making it a superior choice over other types of cables. The MC-1 comes complete with a wall mount bracket and an external power supply, providing you with everything you need for a seamless setup. Its automatic link restoration feature is a testament to its innovative design, re-establishing network links between two MC-1 devices if a connected Soundweb London device is disconnected and reconnected to the network. This eliminates the need for manual resetting of the MC-1 after patching or power loss of an attached Soundweb London device. To keep you informed of its operational status, the MC-1 is equipped with status LEDs that provide indications for Power (PWR), Fiber Link RX (RXF), Fiber Link TX (LKF), Copper RX (RXC), and Copper TX (LKC). Experience the difference of the MC-1 Gigabit Media Converter, a product that combines advanced technology, high-quality construction, and reliable performance for your data transmission needs.
Muxlab 4K UHD HDMI/ST2110 Over IP Uncompressed Multi-Mode Fiber Transmitter
2086 USD
The HDMI 4K/ST2110 over IP Uncompressed Gateway Converter supports the ST-2110 AV over IP protocol standard for Broadcast applications. The unit allows lower cost HDMI 4K equipment to be utilized in a broadcast environment, while extending end point source and sink devices at up to 985ft (300m) via duplex multimode OM3 fiber with LC connectors, at up to 4K resolution @ 30Hz uncompressed (4K 4:4:4 8 bit and 4K 4:2:2 10 bit), in a point-to-point configuration. Pointto-multipoint and multipoint-to-multipoint configurations are also supported by connecting several units to a 10G Ethernet network.The device supports ST-2022-7 (Class D) Redundancy for critical fail-safe applications allowing the audio/video signal to run over two independent 10G Ethernet Networks. The unit provides a 1G Ethernet Network port for control via 3rd party management platforms supporting a RestAPI, or NMOS (IS-04 for discovery and IS-05 for connectivity management). The HDMI 4K/ST2110 over IP Uncompressed Gateway Converter also supports an RS232 port for remote control of end devices (TX side).Applications• Commercial broadcast AV systems• News/sports/TV stations• Movie networks
EtherWAN 100BASE 2km 1310nm MM Commercial SFP LC Fiber Transceiver Module, DDM
58.3 USD
This is a Multi Mode fiber transceiver with a 2km Distance, an operating temperature of 0 to 70 degrees Celsius, and a wavelength of 1310nm.The small form-factor pluggable (SFP) is a compact, hot-pluggable transceiver used for both telecommunication and data communications applications. EtherWAN products that support SFP Modules are fully tested using EtherWAN SFP Modules for the highest level of reliability and compatibility.
alice + olivia Clyde A Line Shift Dress Off White Multi 10
225 USD
Fabric: Heavyweight, non-stretch tweed. Metallic threading. Fringe trim at hem. Mini length. Zip at back. Shell: 69% cotton/9% nylon/8% acrylic/5% viscose/4% other fibers/3% wool/2% polyester. Lined. Lining: 100% polyester. Dry clean. Imported, Vietnam. Measurements: Measurements from size 2
StarTech 1.25Gbps Gigabit Ethernet Fiber Media Converter with Open SFP Slot
167.99 USD
Enhance your network connectivity with the ET91000SFP2 Open SFP Fiber Media Converter, a versatile solution designed to convert and extend a Gigabit Ethernet connection over fiber using the Gigabit SFP of your preference. This device is ideal for bridging an Ethernet (1000Base-T) network to remote network segments via a fiber backbone, offering an open SFP slot for flexibility in choosing an MSA-Compliant Gigabit SFP that aligns with your specific fiber connection mode (single/multi-mode) and distance requirements.This Gigabit Ethernet Fiber Media Converter is equipped with advanced features such as Link-loss forwarding, remote monitor status, and support for two frame lengths. It also offers the convenience of full or half-duplex operation, ensuring efficient network operation. With its Jumbo Frame support, this device is designed to handle larger packets of data, improving network performance and reducing server load.The ET91000SFP2 Open SFP Fiber Media Converter boasts a robust all-steel chassis and offers straightforward plug-and-play installation. It's designed for standalone operation or can be installed into the 20 Slot, 2U Rackmount Chassis (ETCHS2U) for added versatility. If your application requires multiple chassis-mounted media converters, this Gigabit media converter can also be purchased as a Card Module only (ET91000SFP2C).This device is an ideal solution for extending or bridging networks using fiber cabling, providing connectivity to isolated user or network segments in large complexes or separate buildings. It's perfect for secure connections required by government agencies where EMI is not acceptable, connecting traffic control/monitoring systems at extreme distances to the main office, or extending network connectivity to remote areas of stadiums, auditoriums, or other venues.With the open SFP slot, you have the freedom to install the SFP of your choice, ensuring maximum uptime with link-loss forwarding and remote status monitoring. Please note that fiber data transfer speeds and distances are dependent on the SFP used (sold separately).
Ubiquiti Networks 10G Bidirectional SFP+ Single-Mode Optical Transceiver, 2-Pack
160 USD
SFP+ transceiver that supports 10G connections up to 10 km using single-mode fiber with a simplex LC UPC connector.Warning: CLASS 1 LASER PRODUCT, IEC/EN 60825-1:2014 - Do not look into the ends of the fiber optic cable or SFP module while converters are powered.
Ubiquiti Networks 25Gbps SFP28 LC Single-Mode Optical Transceiver
119 USD
SFP28 transceiver that supports 25G connections up to 10 km using single-mode fiber with a duplex LC UPC connector.Warning: CLASS 1 LASER PRODUCT, IEC/EN 60825-1:2014 - Do not look into the ends of the fiber optic cable or SFP module while converters are powered.
Ubiquiti Networks 10G Bidirectional SFP+ Single-Mode Optical Transceiver,20-Pack
1450 USD
SFP+ transceiver that supports 10G connections up to 10 km using single-mode fiber with a simplex LC UPC connector.Warning: CLASS 1 LASER PRODUCT, IEC/EN 60825-1:2014 - Do not look into the ends of the fiber optic cable or SFP module while converters are powered.
AJA Dual Multi-Mode LC 3G Fiber Transmitter SFP Module for FiDO Mini-Converters
455 USD
Discover the power and efficiency of the AJA Dual Multi-Mode LC 3G Fiber Transmitter SFP Module, specifically engineered for FiDO Mini-Converters. This high-quality, durable module is a vital tool for transmitting data over fiber optic cables with utmost reliability.Experience the advanced technology of this innovative module, designed to convert optical signals into electrical ones and vice versa. Its dual multi-mode LC 3G fiber transmission capability ensures seamless data transmission over long distances, making it an indispensable asset for your data communication needs.This reliable fiber transmitter SFP module is not just robust but also compatible with FiDO Mini-Converters, providing you with a versatile solution for your data transmission requirements. With its high-quality construction and innovative design, the AJA Dual Multi-Mode LC 3G Fiber Transmitter SFP Module is a testament to the blend of durability and advanced technology. Whether you're managing a large-scale data center or a small office network, this fiber transmitter SFP module is an essential component for efficient, reliable data transmission. Harness the power of fiber optics with the AJA Dual Multi-Mode LC 3G Fiber Transmitter SFP Module for FiDO Mini-Converters.
Camplex Visual Fault Locator for ST/SC/FC Fiber Connectors, 10mW Output Power
54.95 USD
The Camplex CMX-TL-1501 Visual Fault Locator locates breaks, severe bends, and discontinuities in fiber optic cables at a maximum distance of 10kM and output power of 10mW.Two operating modes consist of CW, continuous wave, for a steady fault illumination, or GLINT, a modulated output. Dust cap and fabric case protect the unit from dirt and debris.
AJA Dual Multi-Mode LC 3G Fiber Receiver SFP Module for FiDO Mini-Converters
455 USD
The AJA Dual Multi-Mode LC 3G Fiber Receiver SFP Module is used for FiDO Mini-Converters.
Camplex 2-Ch Multi Mode OM3 Fiber Optic Tactical Snake Cable, ST Connector, 100'
247.95 USD
Be prepared for any broadcast or pro-audio application with the 2-Channel Multi Mode OM3 Fiber Optic Tactical Snake Cable with ST Connector, 100'. This rugged and lightweight OM3 multimode tactical fiber snake is specifically designed to withstand the rigors of field production in outside broadcasts, rental houses, and more. Constructed with internal aramid strength members, this cable offers superior crush resistance, even in high-traffic areas, when handled appropriately. Its polyurethane outer sheath is robust enough to endure the weight of military tanks and Outside Broadcast vehicles, making it a reliable choice for demanding environments. Each of our fiber optic cables is multi-stage machine polished and rigorously tested for -55dB RL, ensuring optimal performance. We provide test results for each channel with every cable, guaranteeing transparency and quality. Our cables are built in-house at our state-of-the-art LEMO trained fiber shop, where we also offer comprehensive repair services. The Tactical Fiber Snake Reel that comes with this cable includes a Schill fiber optic cable reel, equipped with a connector protection cavity and a hinged latching door. Each Schill reel is meticulously chosen to provide the necessary support and maintain the critical bend radius required by fiber optic cables. For cables over 25 feet, we advise storing on a cable reel to preserve their integrity. We also offer custom lengths and configurations to meet your specific needs. With the 2-Channel Multi Mode OM3 Fiber Optic Tactical Snake Cable with ST Connector, 100', you're investing in durability, flexibility, and exceptional performance.
AJA Single Multi-Mode LC 3G Fiber Receiver SFP Module for FiDO Mini-Converters
395 USD
While the AJA Single Multi-Mode LC 3G Fiber Receiver SFP Module may seem like a simple component, it plays a crucial role in enhancing the performance of FiDO Mini-Converters. This high-quality, durable module is specifically engineered to ensure seamless integration with FiDO Mini-Converters, providing reliable and consistent performance. Boasting advanced technology, this innovative fiber receiver SFP module supports multi-mode LC 3G fiber, enabling high-speed data transfer rates. This makes it an ideal choice for applications that demand rapid connectivity, such as data centers, telecommunications, and CCTV surveillance systems. Constructed with robust materials, this reliable SFP module is designed to withstand the rigors of continuous use, making it a long-lasting addition to your tech arsenal. Experience the difference in speed and efficiency with the AJA Single Multi-Mode LC 3G Fiber Receiver SFP Module for FiDO Mini-Converters.
AJA Single Multi-Mode LC 3G Fiber Transceiver SFP Module for FiDO Mini-Converter
395 USD
Bring high-speed data transfer to your FiDO Mini-Converters with the AJA Single Multi-Mode LC 3G Fiber Transceiver SFP Module. This advanced and innovative module is specifically designed to enhance the performance of your FiDO Mini-Converters, offering reliable and durable operation for your data transmission needs. As a high-quality fiber transceiver, it is engineered to transmit and receive data over long distances using fiber optic cables. This makes it an ideal solution for applications that require robust and uninterrupted data transfer. The AJA Single Multi-Mode LC 3G Fiber Transceiver SFP Module is not just a single-mode transceiver. It's a multi-mode module, designed to work seamlessly with a variety of different types of fiber optic cables. This versatility makes it a valuable asset in a range of different applications, ensuring compatibility and flexibility in your data transmission setup. In a world where data transfer speed and reliability are paramount, this LC 3G Fiber Transceiver SFP Module stands out as a top-tier choice for enhancing your FiDO Mini-Converters. Experience the difference that a high-quality, durable, and reliable fiber transceiver can make in your data transmission tasks.
EtherWAN 10GBASE 300m 850nm MM Commercial SFP+ LC Fiber Transceiver Module, DDM
286.2 USD
This is a Multi Mode fiber transceiver with a 300m distance, an operating temperature of 0 to 70 degrees Celsius, and a wavelength of 850nm.The small form-factor pluggable (SFP) is a compact, hot-pluggable transceiver used for both telecommunication and data communications applications. EtherWAN products that support SFP Modules are fully tested using EtherWAN SFP Modules for the highest level of reliability and compatibility.
StarTech 1 Port Industrial RS-232/422/485 Serial to IP Ethernet Device Server
183.99 USD
The NETRS232485 Serial Device Server lets you remotely manage an industrial RS232/422/485 serial deviceover a local or wide area network (LAN/WAN), with redundant power inputs and dual 10/100Mbps Ethernetports.To minimize downtime, this intuitive dual Ethernet serial over IP solution maintains connection to your criticalequipment by automatically switching to its secondary LAN port within 10 milliseconds of a network failure ordisruption.• Redundant dual Ethernet ports with < 10ms recovery time• Up to 460.8 Kbps baud rate• IP-30 industrial casing and extended operating temperature range• Redundant power input via 12-48V DC terminal block or optional 12V DC power adapter• Supports RS232, RS422 and RS485 serial protocols• Supports ICMP, IP, TCP, UDP, DHCP, BOOTP, ARP/RARP, DNS, SNMP MIB II• SSL, SSH and HTTPS data encryption and security protocols• Wall or DIN rail mountable• Configurable via software utility or web browser• 8KV air and 4KV contact ESD (Electrostatic Discharge) Protection• Simultaneous connection with up to five host devicesIdeal for industrial environments, the serial to Ethernet device server accepts wide-range 12-48V DC powerinput via a terminal block or an optional DC jack, enabling you to add redundant power with a secondary adapter(e.g. 12V DC 1.5A Power Adapter SKU: IM12D1500P - sold separately), keeping the device server functional inthe event of power surges or failures.This device server supports baud rates up to 460.8Kbps which provides a smooth, high-speed connection toyour serial devices. The device server also offers support for HTTPS, SSH and SSL to ensure securecommunication, while integrating remote Telnet configuration and support for IP, HTTP, ICMP, DHCP, TCP andUDP protocols. You can customize the serial device server to suit your application with versatile browser-basedor virtual com port software configuration.Ensuring performance in harsh environments, this serial device server offers 8KV air and 4KV contact ESD(Electrostatic Discharge) Protection and features a rugged, IP-30 case design that is both DIN rail and wallmountable,with an extended operating temperature range (-40deg.C to 70deg.C).Backed by a 5-year StarTech warranty and free lifetime technical support. Applications • Factory or warehouse environments subject to harsh conditions and large temperature variances• Industrial locations where critical equipment requires backup power and LAN connections• Manufacturing (CNC machinery, process control equipment, serial printers)• Security (UPS control, access key panels, video cameras, card readers)• Environmental control (lighting, temperature, clocks)• POS (credit/debit card readers, receipt printers, cash registers, scales) Advantage • Maintain serial connectivity during disruptions with redundant power and network inputs• Suitable for harsh environments and extended temperatures with a rugged, metal enclosure• Mount on DIN rails or on a surface with the attached mounting brackets
AJA FiDO-R-MM 1-Channel Multi-Mode LC Fiber to 3G-SDI Receiver Mini Converter
905 USD
FiDO-R-MM offers unmatched flexibility and cost efficiency for 3G-SDI Fiber conversion, allowing for cable runs up to 700 m (2296 ft) for OM4 and 300 m (984 ft) for OM3 for Multi-Mode fiber optic cables - useful for eliminating ground loop problems. FiDO converters use a compact, low-profile enclosure that works well in tight spaces around and behind equipment racks, trucks and on camera.• Simplex connection (LC connector)• 3G/HD/SD-SDI output• Dual, matching SDI outputs• Uses 5-20VDC power (DWP-U-R1 universal power supply included)• 5 year warranty Universal Power Supply All AJA Mini-Converters ship with a universal power supply that includes international plug connections for use around the world. Compact and Portable AJA Mini-Converters are small enough to fit behind a monitor, in the back of a rack or directly on a camera rig. A locking power connector can't accidentally pull loose and an optional P-TAP power cable allows for battery power in remote locations.
PureLink 10m (32.81') Multi-Mode 2 LC Fiber Optic Cable
149.99 USD
PureLink's TotalWire Fiber Optic Cable Assemblies enable the most secure, pixel-perfect signal transmission and are compatible with all PureMedia and HDTools fiber optic extension and distribution systems. Quality Construction TotalWire fiber cables are factory terminated with industry standard LC connectors in a single, duplex or four-fiber breakout cable design. RJ-style housing with a push-pull mechanism allows easy disengagement in dense spaces. Just Add Fiber Because of its immunity to electrical interference and its greater speeds over longer distances, fiber optic cable assemblies are ideal for applications that require high-bandwidth, high data rate transmission. Every TotalWire fiber cable is quality tested to guarantee minimum insertion loss. Additional Features • Pre-terminated 50/125 multimode fiber• RJ-style push-pull housing• PVC jacket• RoHS compliant• Terminated with LC connectors
PureLink 10m (32.81') Multi-Mode 1 LC Fiber Optic Cable
81.99 USD
You can trust in the high-quality and reliable performance of PureLink's TotalWire Fiber Optic Cable Assemblies, designed to deliver secure, flawless signal transmission. These cables are fully compatible with all PureMedia and HDTools fiber optic extension and distribution systems, making them a versatile choice for your networking needs. Constructed with precision, TotalWire fiber cables are factory terminated with industry-standard LC connectors. They are available in single, duplex, or four-fiber breakout cable designs, offering flexibility based on your specific requirements. The innovative RJ-style housing features a push-pull mechanism, facilitating easy disengagement even in densely packed spaces.Experience the advantages of fiber optic technology with PureLink's TotalWire Fiber Optic Cable Assemblies. Their immunity to electrical interference and superior speeds over long distances make them the ideal solution for applications demanding high-bandwidth and high data rate transmission. Every TotalWire fiber cable undergoes rigorous quality testing to ensure minimum insertion loss, reinforcing their reliability and durability. Additional features include pre-terminated 50/125 multimode fiber, a robust PVC jacket, and RoHS compliance, further enhancing the product's value. Choose the 10m (32.81') Multi-Mode 1 LC Fiber Optic Cable with TotalWire Technology for a seamless, high-speed connection between your computers, routers, switches, and other networking equipment.
PureLink 10m (32.81') Multi-Mode 4 LC Fiber Optic Cable
149.99 USD
Become a part of the digital revolution with PureLink's TotalWire 10m (32.81') Multi-Mode 4 LC Fiber Optic Cable. Engineered for secure, flawless signal transmission, this high-quality fiber optic cable is compatible with all PureMedia and HDTools fiber optic extension and distribution systems, making it a versatile choice for your networking needs.Constructed with precision, the TotalWire fiber cables are factory terminated with industry-standard LC connectors. The design includes a single, duplex, or four-fiber breakout cable, ensuring a reliable connection for your devices. The innovative RJ-style housing features a push-pull mechanism, facilitating easy disengagement even in densely packed spaces.Experience the power of fiber optics with this cable's immunity to electrical interference and its superior speeds over extended distances. Ideal for applications demanding high-bandwidth and high data rate transmission, this multi-mode fiber optic cable is your solution for long-distance network connections.Every TotalWire fiber cable undergoes rigorous quality testing to guarantee minimum insertion loss, ensuring reliable and efficient data transmission. Additional features include an RJ-style push-pull housing for easy handling, a durable PVC jacket for added protection, and RoHS compliance for environmental safety. The LC connectors are terminated with individually color-coded, 62.5/125 simplex sub cables for easy identification.Upgrade your networking setup with the durable, flexible, and innovative 10m (32.81') Multi-Mode 4 LC Fiber Optic Cable from PureLink, a reputable brand known for its high-quality networking equipment.
2001 iZ Technology Radar Nyquist 24 Channel Converter
4700 USD
Dynamic Range: 24 bit mode 100.5 dB A-weighted, 16 bit mode, 96 dB A-weightedTHD+N @ 1 kHz: Less then .006% A-weightedFrequency Response: 10-22kHz ...
AJA FiDO 4 Channel ST Fiber to 3G-SDI Mini Converter
1869 USD
FiDO is a family of SDI/Optical Fiber converters. FiDO allows the transport of SDI, HD-SDI and 3G SDI over distances up to 10km using standard single- mode fiber optic cable, with your choice of LC, ST or SC connectors, depending on the converter model. FiDO converters meet all relevant SMPTE specifications and are rugged, versatile and suitable for indoor or outdoor use.With 9 models, FiDO offers unmatched flexibility and cost efficiency. FiDO dual channel models allow the conversion of 2 channels - perfect for 3D, dual- link SDI or 2 completely independent SDI channels (for example, SD, HD and 3G can be mixed in any combination). Also, FiDO converters offer electrical isolation useful for eliminating ground loop problems.FiDO converters come in a compact, low-profile enclosure for use in tight spaces around and behind equipment racks, trucks and crowded facilities.• Transport of SDI, HD-SDI and 3G HD-SDI over single mode optical fiber• Auto-detection of video format• All SDI Ancillary data including embedded audio is passed• LC, ST OR SC fiber connectors• Simplex or Duplex models available• All inputs, either SDI or fiber, are equalized and re-clocked• ASI compatible• Useful for eliminating ground loop problems 5-20VDC power supply (included) Universal Power Supply All AJA Mini-Converters ship with a Universal Power Supply that includes international plug connections for use around the world. Compact and Portable AJA Mini-Converters are small enough to fit behind a monitor, in the back of a rack or directly on a camera rig. A locking power connector can't accidentally pull loose and an optional P-TAP power cable allows for battery power in remote locations AJA Quality - Guaranteed All AJA Mini-Converters are covered by a 5-year warranty and AJA's advanced replacement policy. If a replacement is necessary, AJA will ship a new unit immediately without the need to send the original unit back first, ensuring you are up and running again as quickly as possible. AJA Mini-Matrix Information on the complete line of AJA Mini-Converters is now available as a mobile app on iOS. The Mini-Converter product line is extensive and this app helps you find the right converter for any situation, wherever you are Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini Matrix app for iPad and iPhone is available now in the Apple iTunes Store.
AJA FIBERLC-1TX-MM 1-Channel Multi-Mode LC 3G Fiber Transmitter SFP Module
395 USD
Bring high-speed, reliable data transmission to your fiber optic network with the FIBERLC-1TX-MM 1-Channel Multi-Mode LC 3G Fiber Transmitter SFP Module from Adorama. Specifically designed for seamless integration with the FiDO Mini-Converter, this advanced module is a testament to AJA's commitment to innovative, high-quality electronics. This durable SFP module is more than just a transmitter; it's a gateway to efficient data transfer. With its ability to support multi-mode fiber transmission up to 3Gbps, it ensures fast, reliable data transfer for even the most demanding applications. The FIBERLC-1TX-MM is not just a transmitter, but a versatile tool compatible with a variety of fiber optic networks. Whether you're working with a single or multi-mode fiber network, this module can support data rates of up to 1 Gbps, making it a reliable choice for any fiber optic transmission needs. Designed to be paired with the AJA FiDO-T Mini-Converter, this module enables fiber-optic connections, converting fiber optic signals to electrical signals and vice versa. The result is a seamless, efficient data transmission process that enhances the performance of your fiber optic network. In the world of fiber optic transmission, the FIBERLC-1TX-MM 1-Channel Multi-Mode LC 3G Fiber Transmitter SFP Module stands out as a high-quality, reliable, and advanced solution. Trust in its durability and innovative design to deliver superior performance for your data transmission needs.