Minwax Helmsman Semi-Gloss Clear Oil-Based Spar Urethane 1 qt
27.99 USD
Consult the complete sheet with detailed information, compare prices and identify the features of Minwax Helmsman Semi-Gloss Clear Oil-Based Spar Urethane 1 qt, available at the cost of 27.99 USD; it belongs to the Building Supplies category; the seller is Minwax Helmsman Semi-Gloss Clear Oil-Based Spar Urethane 1 qt and the manufacturer is Minwax.
Minwax Helmsman Spar Urethane is specially formulated as a protective clear finish for exterior or interior wood exposed to sunlight, water, or temperature changes.
EAN: 0027426632103
Shipping Cost: -1 USD
Availability: in stock
Condition: new
Minwax Helmsman Spar Urethane is specially formulated as a protective clear finish for exterior or interior wood exposed to sunlight, water, or temperature changes.
EAN: 0027426632103
Shipping Cost: -1 USD
Availability: in stock
Condition: new
Compare Similar Products
Minwax Helmsman Gloss Clear Oil-Based Spar Urethane 1 qt
27.99 USD
Minwax Helmsman Spar Urethane is specially formulated as a protective clear finish for exterior or interior wood exposed to sunlight, water, or temperature changes.
Minwax PolyShades Semi-Transparent Satin Pecan Oil-Based Stain/Polyurethane Finish 1 qt
20.99 USD
Minwax Polyshades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Polyshades stain and polyurethane also allow you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish, you can change the color without removing the old finish or hiding the grain.
Old Masters Semi-Gloss Clear Oil-Based Marine Spar Varnish 1 qt
32.99 USD
Old Masters Spar Marine Varnish is a durable exterior coating. This product can be used on wood, fiberglass, coated metal or painted surfaces. It contains Ultra Violet Absorbers for advanced sun protection. For use on exterior surfaces such as fences, railings, lawn furniture, doors and above the water-line marine surfaces.
Minwax Gel Stain Semi-Transparent Coffee Oil-Based Gel Stain 1 qt
24.99 USD
Minwax Gel Stain is a non-drip stain that adds natural colors and accentuates the beauty of a wide range of wood and non-wood surfaces including wood, plywood, veneer, fiberglass, metal and molded fiberboard.
Minwax PolyShades Semi-Transparent Gloss Honey Pine Oil-Based Stain/Polyurethane Finish 1 qt
20.99 USD
Minwax Polyshades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Polyshades stain and polyurethane also allow you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish, you can change the color without removing the old finish or hiding the grain.
Minwax PolyShades Semi-Transparent Gloss Olde Maple Oil-Based Stain/Polyurethane Finish 1 qt
20.99 USD
Minwax Polyshades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Polyshades stain and polyurethane also allow you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish, you can change the color without removing the old finish or hiding the grain.
Minwax PolyShades Semi-Transparent Gloss Slate Oil-Based Stain/Polyurethane Finish 1 qt
23.99 USD
Minwax Polyshades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Polyshades stain and polyurethane also allow you to easily change the color of your currently stained or varnished wood without stripping.
Minwax PolyShades Semi-Transparent Gloss Classic Oak Oil-Based Stain/Polyurethane Finish 1 qt
20.99 USD
Minwax Polyshades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Polyshades stain and polyurethane also allow you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish, you can change the color without removing the old finish or hiding the grain.
Minwax PolyShades Semi-Transparent Gloss Pecan Oil-Based Stain/Polyurethane Finish 1 qt
20.99 USD
Minwax Polyshades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Polyshades stain and polyurethane also allow you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish, you can change the color without removing the old finish or hiding the grain.
Minwax PolyShades Semi-Transparent Gloss Classic Black Oil-Based Stain/Polyurethane Finish 1 qt
20.99 USD
Minwax Polyshades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Polyshades stain and polyurethane also allow you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish, you can change the color without removing the old finish or hiding the grain.
Minwax Polycrylic Semi-Gloss Crystal Clear Water-Based Polyurethane 1 qt
24.99 USD
Protect interior wood projects like woodwork, furniture and more, and add natural beauty with Minwax Polycrylic Protective Finish. The crystal clear top coat dries and stays clear, and protects against scratches, scuffs and blemishes to protect the wood surface beneath. It is ideal for use over all Minwax Oil-Based and Water-Based Stains and colors and all wood species including light woods like maple, ash & birch. Ultra-fast-drying protective coating allows for quick recoats after 2 hours. Easy to clean-up the clear wood finish with soap & water.
Varathane Semi-Gloss Golden Oak Water-Based Acrylic Modified Urethane One-Step Stain/Poly 1 qt
27.99 USD
Varathane One Step Water-Base Stain + Poly combines the rich, deep color of Varathane stains with the lasting protection and shine of polyurethane. Finish interior wood projects faster with fewer products and applications without compromising appearance or scratch resistance. Low-odor water-based formula cleans up easily with soap and water.
Minwax Gel Stain Semi-Transparent Mahogany Oil-Based Gel Stain 1 qt
24.99 USD
Minwax Gel Stain is a non-drip stain that adds natural colors and accentuates the beauty of a wide range of wood and non-wood surfaces including wood, plywood, veneer, fiberglass, metal and molded fiberboard.
Minwax Polycrylic Max Semi-Gloss Clear Water-Based Polycrylic 1 qt
29.99 USD
One-coat protection, perfected. Finish projects faster with this premium, crystal-clear topcoat. Easy to apply, with better control, Polycrylic Max dries in just 1 hour to an incredibly smooth, durable finish.
Varathane Semi-Gloss Dark Walnut Water-Based Acrylic Modified Urethane One-Step Stain/Poly 1 qt
27.99 USD
Varathane One Step Water-Base Stain + Poly combines the rich, deep color of Varathane stains with the lasting protection and shine of polyurethane. Finish interior wood projects faster with fewer products and applications without compromising appearance or scratch resistance. Low-odor water-based formula cleans up easily with soap and water.
Varathane Semi-Gloss Golden Pecan Water-Based Acrylic Modified Urethane One-Step Stain/Poly 1 qt
29.99 USD
Varathane One Step Water-Base Stain + Poly combines the rich, deep color of Varathane stains with the lasting protection and shine of polyurethane. Finish interior wood projects faster with fewer products and applications without compromising appearance or scratch resistance. Low-odor water-based formula cleans up easily with soap and water.
Minwax Semi-Gloss Clear Oil-Based Brushing Lacquer 1 qt
21.99 USD
Minwax Clear Brushing Lacquer is a beautiful, clear, durable protective wood finish. It is ideal for interior wood surfaces, and can be used over bare or stained wood. Recoat in only two hours, with no sanding needed between coats. Once Minwax Clear Brushing Lacquer has been applied, another coat can be applied at any time without having to remove the old lacquer finish.
Minwax PolyShades Semi-Transparent Satin Classic Oak Oil-Based Stain/Polyurethane Finish 1 qt
20.99 USD
Minwax Polyshades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Polyshades stain and polyurethane also allow you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish, you can change the color without removing the old finish or hiding the grain.
Minwax PolyShades Semi-Transparent Satin Honey Pine Oil-Based Stain/Polyurethane Finish 1 qt
20.99 USD
Minwax PolyShades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. PolyShades stain and polyurethane also allows you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish you can change the color without removing the old finish or hiding the grain.
Minwax PolyShades Semi-Transparent Satin Espresso Oil-Based Stain/Polyurethane Finish 1 qt
20.99 USD
"Minwax PolyShades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. PolyShades stain and polyurethane also allows you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish you can change the color without removing the old finish or hiding the grain. For additional protection, without adding color, add a coat of Minwax fast-drying polyurethane or Minwax wipe-on poly. Using a natural bristle brush, dip approximately an inch into the can, gently tapping it against the inside to remove any excess. Apply a very thin, even coat following the direction of the grain. Make sure to maintain a ""Wet"" edge. To minimize the brush marks and bubbles after staining, tip off the surface by holding the brush at a 45 degree angle and lightly run the bristles over the entire length of the wood. Let the first coat dry for 6 hours or more. Dry time may be extended due to high humidity, low temperature and inadequate ventilation or if the coat is applied too thick. Rub the surface lightly with fine steel wool. Remove all dust. Brush on a second thin coat following directions above. To deepen the color, apply a third coat. To help ensure uniform acceptance of stain color and beautiful results, pretreat new or raw wood with oil-based Minwax pre-stain wood conditioner, following label directions."
Minwax PolyShades Semi-Transparent Satin Olde Maple Oil-Based Stain/Polyurethane Finish 1 qt
20.99 USD
Minwax PolyShades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. PolyShades stain and polyurethane also allows you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish you can change the color without removing the old finish or hiding the grain.
Minwax Gel Stain Semi-Transparent Walnut Oil-Based Gel Stain 1 qt
24.99 USD
Minwax Gel Stain is a non-drip stain that adds natural colors and accentuates the beauty of a wide range of wood and non-wood surfaces including wood, plywood, veneer, fiberglass, metal and molded fiberboard.
Minwax PolyShades Semi-Transparent Satin Classic Black Oil-Based Stain/Polyurethane Finish 1 qt
20.99 USD
Minwax PolyShades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. PolyShades stain and polyurethane also allows you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish you can change the color without removing the old finish or hiding the grain.
Minwax PolyShades Semi-Transparent Satin Antique Walnut Oil-Based Stain/Polyurethane Finish 1 qt
20.99 USD
Minwax Polyshades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Polyshades stain and polyurethane also allow you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish, you can change the color without removing the old finish or hiding the grain.
Minwax PolyShades Semi-Transparent Satin American Chestnut Oil-Based Stain/Polyurethane Finish 1 qt
20.99 USD
Minwax PolyShades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. PolyShades stain and polyurethane also allows you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish you can change the color without removing the old finish or hiding the grain.
Minwax Helmsman Semi-Gloss Clear Water-Based Spar Urethane 1 qt
27.99 USD
Minwax Water Based Helmsman Spar Urethane is specially formulated to protect wood against nature's toughest conditions. Water Based Helmsman forms a protective barrier against rain and moisture and its special oils allow the finish to expand and contract with the wood as seasons, temperatures, and humidity change. The enhanced ultraviolet absorbers found in Water Based Helmsman reduce the graying and fading effects of the sun and its superior formula allows for a rapid recoat.
Varathane Semi-Gloss Kona Water-Based Acrylic Modified Urethane One-Step Stain/Poly 1 qt
27.99 USD
Varathane One Step Water-Base Stain + Poly combines the rich, deep color of Varathane stains with the lasting protection and shine of polyurethane. Finish interior wood projects faster with fewer products and applications without compromising appearance or scratch resistance. Low-odor water-based formula cleans up easily with soap and water.
Minwax Gel Stain Semi-Transparent Slate Oil-Based Gel Stain 1 qt
27.99 USD
Minwax Gel Stain is a non-drip stain that adds natural colors and accentuates the beauty of a wide range of wood and non-wood surfaces including wood, plywood, veneer, fiberglass, metal and molded fiberboard.
Minwax Gel Stain Semi-Transparent Hickory Oil-Based Gel Stain 1 qt
24.99 USD
Minwax Gel Stain is a non-drip stain that adds natural colors and accentuates the beauty of a wide range of wood and non-wood surfaces including wood, plywood, veneer, fiberglass, metal and molded fiberboard.
Minwax Gel Stain Semi-Transparent Aged Oak Oil-Based Gel Stain 1 qt
24.99 USD
Minwax Gel Stain is a non-drip stain that adds natural colors and accentuates the beauty of a wide range of wood and non-wood surfaces including wood, plywood, veneer, fiberglass, metal and molded fiberboard.
Minwax Polycrylic Gloss Crystal Clear Water-Based Polyurethane 1 qt
24.99 USD
Protect interior wood projects like woodwork, furniture and more, and add natural beauty with Minwax Polycrylic Protective Finish. The crystal clear top coat dries and stays clear, and protects against scratches, scuffs and blemishes to protect the wood surface beneath. It is ideal for use over all Minwax Oil-Based and Water-Based Stains and colors and all wood species including light woods like maple, ash & birch. Ultra-fast-drying protective coating allows for quick recoats after 2 hours. Easy to clean-up the clear wood finish with soap & water.
Minwax Gel Stain Semi-Transparent Cherrywood Oil-Based Gel Stain 1 qt
24.99 USD
Minwax Gel Stain is a non-drip stain that adds natural colors and accentuates the beauty of a wide range of wood and non-wood surfaces including wood, plywood, veneer, fiberglass, metal and molded fiberboard.
Minwax Gel Stain Semi-Transparent Chestnut Oil-Based Gel Stain 1 qt
24.99 USD
Minwax Gel Stain is a non-drip stain that adds natural colors and accentuates the beauty of a wide range of wood and non-wood surfaces including wood, plywood, veneer, fiberglass, metal and molded fiberboard. Ideal for vertical surfaces inside and outside
Minwax Helmsman Satin Clear Oil-Based Spar Urethane 1 qt
27.99 USD
Minwax Helmsman Spar Urethane is specially formulated as a protective clear finish for exterior or interior wood exposed to sunlight, water, or temperature changes.
ZAR Ultra Max Semi-Gloss Clear Water-Based Polyurethane 1 qt
34.99 USD
ZAR Interior Oil Modified Urethane Poly OMU features Dual Drying Technology for a harder through cure Since you can recoat in just 2 hours, its the perfect choice for heavily used areas. Self leveling properties make it ideal for creating smooth finishes on floors, cabinets, furniture and woodwork. The low odor formula offers superior hardness and mar resistance and delivers outstanding wear and durability. ZAR Interior Oil Modified Urethane Poly OMU cleans up quickly and easily with soap and water.
ZAR Semi-Gloss Clear Water-Based Polyurethane 1 qt
31.99 USD
This non-yellowing, environmentally safe, clear wood finish is specially formulated to protect and beautify cabinets, furniture, shiplap paneling, woodwork and floors. As it dries crystal clear, you can use it over light-colored or white stains with confidence. ZAR Interior Water Base Poly Crystal Clear is Exotic Hardwood Approved and is ideal for use on Teak, Brazilian Walnut and other similar wood species.
Storm System Semi-Solid Tintable Clear Oil-Based Penetrating Oil Exterior Stain 1 gal
44.99 USD
Storm System alkyd linseed oil finish semi-solid clear base is rich in linseed oil is designed to provide years of service and beauty for most exterior wood surfaces. The partial pigmentation of this finish blends with the colors and tones of the wood without distracting from the natural graining and texture inherent in the wood itself.
Minwax Polyshades Semi-Transparent Gloss Aged Barrel Stain/Polyurethane Finish 1 qt
23.99 USD
Minwax Polyshades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Polyshades stain and polyurethane also allow you to easily change the color of your currently stained or varnished wood without stripping.
Minwax Polycrylic Matte Crystal Clear Water-Based Polyurethane 1 qt
24.99 USD
Protect interior wood projects like woodwork, furniture and more, and add natural beauty with Minwax Polycrylic Protective Finish. The crystal clear top coat dries and stays clear, and protects against scratches, scuffs and blemishes to protect the wood surface beneath. It is ideal for use over all Minwax Oil-Based and Water-Based Stains and colors and all wood species including light woods like maple, ash & birch. Ultra-fast-drying protective coating allows for quick recoats after 2 hours. Easy to clean-up the clear wood finish with soap & water.