Minwax Helmsman Gloss Clear Oil-Based Spar Urethane 1 qt
27.99 USD
Explore the detailed sheet with complete information, compare prices and identify the features of Minwax Helmsman Gloss Clear Oil-Based Spar Urethane 1 qt, available at the cost of 27.99 USD; it belongs to the Building Supplies category; the seller is Minwax Helmsman Gloss Clear Oil-Based Spar Urethane 1 qt and the manufacturer is Minwax.
Helmsman Spar Urethane is specially formulated as a protective clear finish for exterior or interior wood exposed to sunlight, water, or temperature changes. Ideal for use on doors, windows, trim, bathroom cabinets, bar tops, kitchen countertops, outdoor furniture. Not recommended for floors.
EAN: 0027426632004
Shipping Cost: -1 USD
Availability: in stock
Condition: new
Helmsman Spar Urethane is specially formulated as a protective clear finish for exterior or interior wood exposed to sunlight, water, or temperature changes. Ideal for use on doors, windows, trim, bathroom cabinets, bar tops, kitchen countertops, outdoor furniture. Not recommended for floors.
EAN: 0027426632004
Shipping Cost: -1 USD
Availability: in stock
Condition: new
Compare Similar Products
Minwax Helmsman Semi-Gloss Clear Oil-Based Spar Urethane 1 qt
27.99 USD
Minwax Helmsman Spar Urethane is specially formulated as a protective clear finish for exterior or interior wood exposed to sunlight, water or temperature changes.
Minwax Helmsman Satin Clear Oil-Based Spar Urethane 1 qt
27.99 USD
Minwax Helmsman spar urethane is specially formulated as a protective clear finish for exterior or interior wood exposed to sunlight, water or temperature changes.
Minwax Helmsman Gloss Clear Water-Based Spar Urethane 1 qt
27.99 USD
Minwax water based Helmsman Spar Urethane is a crystal clear, water-based finish that is specially formulated to protect wood against nature's toughest conditions.
Minwax Helmsman Semi-Gloss Clear Water-Based Spar Urethane 1 qt
27.99 USD
Minwax Helmsman spar urethane is specially formulated as a protective clear finish for exterior or interior wood exposed to sunlight, water or temperature changes.
Rust-Oleum Gloss Clear Oil-Based Marine Spar Varnish 1 qt
31.99 USD
Rust-Oleum Marine Spar Varnish beautifies your wooden surfaces with a crystal clear finish that protects from the sun, weather, sea spray and mildew. The coating will expands and contracts to the ever-changing weather conditions to provide maximum protection.
Minwax Gel Stain Semi-Transparent Aged Oak Oil-Based Gel Stain 1 qt
26.99 USD
Minwax Gel Stain is a non-drip stain that adds natural colors and accentuates the beauty of a wide range of wood and non-wood surfaces including wood, plywood, veneer, fiberglass, metal and molded fiberboard.
Minwax One-Coat Gloss Crystal Clear Water-Based Fast-Drying Polyurethane 1 qt
26.99 USD
Protect your wood projects and get more done, faster, with Minwax One Coat polyurethane protective finish. This crystal clear protective top coat dries in just two hours and lets you complete wood projects 3x faster without sacrificing durability. The advanced formulation in this clear top coat provides the same level of durability in one coat the is comparable to three coats of a conventional polyurethane. Use it to easily protect and add beauty to your wood projects. It's non-ambering and also cleans up easily with just soap and warm water. It is available in a variety of sheens. Apply a coat of Minwax One Coat polyurethane with a high-quality synthetic bristle brush. Apply in the direction of the wood grain in one smooth, uniform coat. Special Instructions: Minwax One Coat polyurethane should not be applied over red mahogany stains. Instead use Minwax fast drying polyurethane or Minwax water based oil-modified polyurethane over any red mahogany stain. Special instructions: Minwax One Coat polyurethane is not recommended for use on floors because it would require more frequent recoating in high traffic areas. Instead, we recommend Minwax super fast drying polyurethane for floors or Minwax ultimate floor finish for maximum durability. Surface must be dry and free of wax, grease, polish, old finishes in poor condition or any foreign matter. Sand to a smooth, uniform surface. Do not use steel wool. Remove dust with a damp cloth. Let dry completely. Advanced formulation provides the same level of durability in one coat that is comparable to three coats of a conventional polyurethane.
Minwax Gel Stain Semi-Transparent Coffee Oil-Based Gel Stain 1 qt
26.99 USD
Minwax Gel Stain is a non-drip stain that adds natural colors and accentuates the beauty of a wide range of wood and non-wood surfaces including wood, plywood, veneer, fiberglass, metal and molded fiberboard.
Minwax One Coat Transparent Semi-Gloss Crystal Clear Water-Based Polyurethane 1 qt
26.99 USD
Protect your wood projects and get more done, faster, with Minwax One Coat polyurethane protective finish. This crystal clear protective top coat dries in just two hours and lets you complete wood projects 3x faster without sacrificing durability. The advanced formulation in this clear top coat provides the same level of durability in one coat the is comparable to three coats of a conventional polyurethane. Use it to easily protect and add beauty to your wood projects. It's non-ambering and also cleans up easily with just soap and warm water. It is available in a variety of sheens. Apply a coat of Minwax One Coat polyurethane with a high-quality synthetic bristle brush. Apply in the direction of the wood grain in one smooth, uniform coat. Special Instructions: Minwax One Coat polyurethane should not be applied over red mahogany stains. Instead use Minwax fast drying polyurethane or Minwax water based oil-modified polyurethane over any red mahogany stain. Special instructions: Minwax One Coat polyurethane is not recommended for use on floors because it would require more frequent recoating in high traffic areas. Instead, we recommend Minwax super fast drying polyurethane for floors or Minwax ultimate floor finish for maximum durability. Surface must be dry and free of wax, grease, polish, old finishes in poor condition or any foreign matter. Sand to a smooth, uniform surface. Do not use steel wool. Remove dust with a damp cloth. Let dry completely. Advanced formulation provides the same level of durability in one coat that is comparable to three coats of a conventional polyurethane.
Minwax Helmsman Satin Clear Water-Based Spar Urethane 1 qt
27.99 USD
Minwax water based Helmsman spar urethane is a crystal clear, water-based finish that is specially formulated to protect wood against nature's toughest conditions.
Minwax PolyShades Semi-Transparent Gloss Honey Pine Oil-Based Stain/Polyurethane Finish 1 qt
22.99 USD
Minwax Polyshades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Polyshades stain and polyurethane also allow you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish, you can change the color without removing the old finish or hiding the grain.
Minwax PolyShades Semi-Transparent Gloss Classic Oak Oil-Based Stain/Polyurethane Finish 1 qt
22.99 USD
Minwax Polyshades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Polyshades stain and polyurethane also allow you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish, you can change the color without removing the old finish or hiding the grain.
Minwax PolyShades Semi-Transparent Satin Mission Oak Oil-Based Stain/Polyurethane Finish 1 qt
22.99 USD
Minwax Polyshades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Polyshades stain and polyurethane also allow you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish, you can change the color without removing the old finish or hiding the grain.
Minwax Polycrylic Semi-Gloss Crystal Clear Water-Based Polyurethane 1 qt
27.99 USD
Minwax Polycrylic Polyurethane is a crystal clear, ultra fast-drying protective topcoat. Protects and adds beauty to interior wood surfaces including woodwork, furniture, doors and cabinets. Ideal for use over light woods like maple, ash and birch as well as over Minwax water-based wood stains.
Minwax PolyShades Semi-Transparent Gloss Slate Oil-Based Stain/Polyurethane Finish 1 qt
22.99 USD
Minwax Polyshades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Polyshades stain and polyurethane also allow you to easily change the color of your currently stained or varnished wood without stripping.
Minwax PolyShades Semi-Transparent Satin Classic Oak Oil-Based Stain/Polyurethane Finish 1 qt
22.99 USD
Minwax Polyshades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Polyshades stain and polyurethane also allow you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish, you can change the color without removing the old finish or hiding the grain.
Minwax PolyShades Semi-Transparent Satin Honey Pine Oil-Based Stain/Polyurethane Finish 1 qt
22.99 USD
Minwax PolyShades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. PolyShades stain and polyurethane also allows you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish you can change the color without removing the old finish or hiding the grain.
Minwax PolyShades Semi-Transparent Satin Olde Maple Oil-Based Stain/Polyurethane Finish 1 qt
22.99 USD
Minwax PolyShades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. PolyShades stain and polyurethane also allows you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish you can change the color without removing the old finish or hiding the grain.
Minwax PolyShades Semi-Transparent Satin Espresso Oil-Based Stain/Polyurethane Finish 1 qt
22.99 USD
"Minwax PolyShades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. PolyShades stain and polyurethane also allows you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish you can change the color without removing the old finish or hiding the grain. For additional protection, without adding color, add a coat of Minwax fast-drying polyurethane or Minwax wipe-on poly. Using a natural bristle brush, dip approximately an inch into the can, gently tapping it against the inside to remove any excess. Apply a very thin, even coat following the direction of the grain. Make sure to maintain a ""Wet"" edge. To minimize the brush marks and bubbles after staining, tip off the surface by holding the brush at a 45 degree angle and lightly run the bristles over the entire length of the wood. Let the first coat dry for 6 hours or more. Dry time may be extended due to high humidity, low temperature and inadequate ventilation or if the coat is applied too thick. Rub the surface lightly with fine steel wool. Remove all dust. Brush on a second thin coat following directions above. To deepen the color, apply a third coat. To help ensure uniform acceptance of stain color and beautiful results, pretreat new or raw wood with oil-based Minwax pre-stain wood conditioner, following label directions."
Minwax Gel Stain Semi-Transparent Slate Oil-Based Gel Stain 1 qt
26.99 USD
Minwax Gel Stain is a non-drip stain that adds natural colors and accentuates the beauty of a wide range of wood and non-wood surfaces including wood, plywood, veneer, fiberglass, metal and molded fiberboard.
Minwax PolyShades Semi-Transparent Satin Pecan Oil-Based Stain/Polyurethane Finish 1 qt
22.99 USD
Minwax Polyshades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Polyshades stain and polyurethane also allow you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish, you can change the color without removing the old finish or hiding the grain.
Minwax Polycrylic Gloss Crystal Clear Water-Based Polyurethane 1 qt
27.99 USD
Minwax Polycrylic Polyurethane is a crystal clear, ultra fast-drying protective topcoat. Protects and adds beauty to interior wood surfaces including woodwork, furniture, doors and cabinets. Ideal for use over light woods like maple, ash and birch as well as over Minwax water-based wood stains.
Minwax Gel Stain Semi-Transparent Hickory Oil-Based Gel Stain 1 qt
26.99 USD
Minwax Gel Stain is a non-drip stain that adds natural colors and accentuates the beauty of a wide range of wood and non-wood surfaces including wood, plywood, veneer, fiberglass, metal and molded fiberboard.
Minwax PolyShades Semi-Transparent Gloss Pecan Oil-Based Stain/Polyurethane Finish 1 qt
22.99 USD
Minwax Polyshades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Polyshades stain and polyurethane also allow you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish, you can change the color without removing the old finish or hiding the grain.
Minwax Water Based Oil-Modified Semi-Gloss Clear Water-Based Oil-Modified Polyurethane 1 qt
26.99 USD
Protect your interior wood projects and keep them looking beautiful when using Minwax Water Based Oil-Modified Polyurethane Wood Finish. This water-based clear sealer protective coating combines superior durability with the beauty of traditional polyurethane. It adds long-lasting beauty and protection to interior wood surfaces including woodwork, furniture, doors, cabinets and floors, protecting them against scratches, spills and more. Get more done with this protective poly coating. It can be used on both finished and unfinished wood projects.
Minwax Gel Stain Semi-Transparent Chestnut Oil-Based Gel Stain 1 qt
26.99 USD
Minwax Gel Stain is a non-drip stain that adds natural colors and accentuates the beauty of a wide range of wood and non-wood surfaces including wood, plywood, veneer, fiberglass, metal and molded fiberboard. Ideal for vertical surfaces inside and outside
Minwax Water Based Oil-Modified Satin Clear Water-Based Oil-Modified Polyurethane 1 qt
26.99 USD
Protect your interior wood projects and keep them looking beautiful when using Minwax Water Based Oil-Modified Polyurethane Wood Finish. This water-based clear sealer protective coating combines superior durability with the beauty of traditional polyurethane. It adds long-lasting beauty and protection to interior wood surfaces including woodwork, furniture, doors, cabinets and floors, protecting them against scratches, spills and more. Get more done with this protective poly coating. It can be used on both finished and unfinished wood projects.
Minwax Gel Stain Semi-Transparent Cherrywood Oil-Based Gel Stain 1 qt
26.99 USD
Minwax Gel Stain is a non-drip stain that adds natural colors and accentuates the beauty of a wide range of wood and non-wood surfaces including wood, plywood, veneer, fiberglass, metal and molded fiberboard.
Minwax PolyShades Semi-Transparent Gloss Classic Black Oil-Based Stain/Polyurethane Finish 1 qt
22.99 USD
Minwax Polyshades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Polyshades stain and polyurethane also allow you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish, you can change the color without removing the old finish or hiding the grain.
Minwax Polycrylic Satin Crystal Clear Water-Based Polyurethane 1 qt
27.99 USD
Minwax Polycrylic Polyurethane is a crystal clear, ultra fast-drying protective topcoat. Protects and adds beauty to interior wood surfaces including woodwork, furniture, doors and cabinets. Ideal for use over light woods like maple, ash and birch as well as over Minwax water-based wood stains.
Minwax PolyShades Semi-Transparent Satin Classic Black Oil-Based Stain/Polyurethane Finish 1 qt
22.99 USD
Minwax PolyShades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. PolyShades stain and polyurethane also allows you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish you can change the color without removing the old finish or hiding the grain.
Minwax PolyShades Semi-Transparent Satin American Chestnut Oil-Based Stain/Polyurethane Finish 1 qt
22.99 USD
Minwax PolyShades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. PolyShades stain and polyurethane also allows you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish you can change the color without removing the old finish or hiding the grain.
Minwax Polycrylic Matte Crystal Clear Water-Based Polyurethane 1 qt
27.99 USD
Minwax Polycrylic Polyurethane is a crystal clear, ultra fast-drying protective topcoat. Protects and adds beauty to interior wood surfaces including woodwork, furniture, doors and cabinets. Ideal for use over light woods like maple, ash and birch as well as over Minwax water-based wood stains.
Minwax Wipe-On Poly Satin Clear Polyurethane 1 qt
23.99 USD
Minwax wipe-on poly is a durable, clear finish that combines polyurethane protection with classic and hand rubbed beauty.
Minwax Semi-Gloss Clear Oil-Based Brushing Lacquer 1 qt
24.99 USD
Minwax Clear Brushing Lacquer is a beautiful, clear, durable protective wood finish. It is ideal for interior wood surfaces, and can be used over bare or stained wood. Recoat in only two hours, with no sanding needed between coats. Once Minwax Clear Brushing Lacquer has been applied, another coat can be applied at any time without having to remove the old lacquer finish.
Minwax Gel Stain Semi-Transparent Simply White Oil-Based Gel Stain 1 qt
26.99 USD
Minwax Gel Stain is a non-drip stain that adds natural colors and accentuates the beauty of a wide range of wood and non-wood surfaces including wood, plywood, veneer, fiberglass, metal and molded fiberboard.
Zinsser Bulls Eye Clear Shellac-Based Shellac Finish and Sealer 1 qt
24.99 USD
Bulls-Eye Shellac is a shellac-based sealer that is designed to give the wood a natural looking, mid-gloss finish that will not yellow or darken with age. Bulls-Eye Shellac is recommended for application to interior walls, doors, trim, cabinets, furniture and related paintable surfaces.
Varathane Semi-Gloss Golden Oak Water-Based Acrylic Modified Urethane One-Step Stain/Poly 1 qt
27.99 USD
Varathane One Step Water-Base Stain + Poly combines the rich, deep color of Varathane stains with the lasting protection and shine of polyurethane. Finish interior wood projects faster with fewer products and applications without compromising appearance or scratch resistance. Low-odor water-based formula cleans up easily with soap and water.
Minwax Gel Stain Semi-Transparent Walnut Oil-Based Gel Stain 1 qt
26.99 USD
Minwax Gel Stain is a non-drip stain that adds natural colors and accentuates the beauty of a wide range of wood and non-wood surfaces including wood, plywood, veneer, fiberglass, metal and molded fiberboard.