BISSELL Lower Hose for Select Upright Vacuum Cleaners 1628114
31.23 USD
Access the complete information sheet, compare prices and identify the features of BISSELL Lower Hose for Select Upright Vacuum Cleaners 1628114, available at the price of 31.23 USD; it fits into the Vacuum Cleaners category; the product is sold by BISSELL Lower Hose for Select Upright Vacuum Cleaners 1628114 and is made by BISSELL.
Lower Hose for Select BISSELL Upright Vacuum Cleaners, including BISSELL SurfaceSense Pet Multi-Surface Vacuum, series 2817. Lower Hose for Select Upright Vacuum Cleaners 1628114
Shipping Cost: 7.95 USD
Availability: in stock
Condition: new
Compare Similar Products
BISSELL Battery Cover w/ 2 Screws ICONpet Robotic Vacuum 1618613
30.03 USD
Battery Cover with 2 screws for the BISSELL ICONpet Robotic Vacuum To replace the Battery, please follow these instructions. Gently press the battery connector tab with a finger and pull the battery connector away from the robot. Dispose of battery properly When replacing the battery, make sure you can see the wires and connector from the top to prevent damage Battery Cover w/ 2 Screws ICONpet Robotic Vacuum 1618613
BISSELL Hose Assembly for Select Vacuums 1635628
37.14 USD
Hose Assembly for Select BISSELL Upright Vacuum Cleaners. Click on "view products" to see if this hose fits your machine. To attach the hose, follow these instructions for assembly: Attach the Handle and Wand to the vacuum base. Attach the hose to wand and twist clockwise to lock into place. Attach hose to back of vacuum and twist clockwise to lock into place. Attach hose clip to the body of the vacuum by sliding up until it clicks into place. Remove hose clip for extended cleaning reach when in use. The hose should sit on the vacuum without any twists. Hose Assembly for Select Vacuums 1635628
BISSELL Hose Assembly for Select Vacuums 1631291
37.16 USD
Hose Assembly for Select BISSELL Upright Vacuum Cleaners. Click on "view products" to see if this hose fits your machine. To attach the hose, follow these instructions for assembly: Attach the Handle and Wand to the vacuum base. Attach the hose to wand and twist clockwise to lock into place. Attach hose to back of vacuum and twist clockwise to lock into place. Attach hose clip to the body of the vacuum by sliding up until it clicks into place. Remove hose clip for extended cleaning reach when in use. The hose should sit on the vacuum without any twists. Hose Assembly for Select Vacuums 1631291
BISSELL TurboBrush for Select Upright Vacuum Cleaners 1607765
35.44 USD
Grey colored TurboBrush with white bristles, spin to grip hair and debris that is embedded in furniture and upholstery. Also great for cleaning auto car flooring. Simply attach to the end of the hose and the TurboBrush will do the rest. This accessory part can be used in place of part numbers: 2037173, 2037171, and 2031429. TurboBrush for Select Upright Vacuum Cleaners 1607765
BISSELL Hose Assembly for Select Vacuums 1628296
32.01 USD
Hose Assembly for Select BISSELL Upright Vacuum Cleaners. Click on "view products" to see if this Hose fits your model vacuum cleaner. To Clean the Hose and Foot, follow these instructions: Locate the stretch hose where it connects to the hose elbow on the back of the vacuum. Look to see if there is any debris in the hose and hose elbow. Clean as necessary. Locate the clear foot hose under the hose holder. Remove the two screws and clear clogs and debris in the hose. Use a long narrow object such as a broomstick to clean the hose. Replace two screws and reattach stretch hose by sliding over inlet and rotating upwards towards the lock position. Hose Assembly for Select Vacuums 1628296
BISSELL Access Plate for Select Upright Vacuum Cleaners 2032374
33.85 USD
Click on "View Products" to see if this Access Plate fits your BISSELL Upright Vacuum Cleaner. The Access Plate is critical component to your machine's performance. It holds the brush and belt into place on the machine. Typically it includes 5 to 8 screws depending on the model. Signs to replace your Access Plate are if you are experiencing any wearing on the inside or outside of the access plate. While you are doing routine maintenance, if you notice wear and tear of the brush, you may want to check the access plate as well as they go hand in hand. Access Plate for Select Upright Vacuum Cleaners 2032374
BISSELL Access Plate for Select Upright Vacuum Cleaners 1608237
30.96 USD
NOTE: Replacement DOES NOT include screws. Access Plate fits under the foot and holds the brush inside the foot of the vacuum. Unscrews to access the brush. Fits select Upright Vacuum Cleaners including PowerForce Vacuums, series 1701, 1797, 2190, 2692. Access Plate for Select Upright Vacuum Cleaners 1608237
BISSELL Separator Assembly for Select Hand Vacuum 1614203
33.5 USD
This Separator Assembly DOES NOT come with the mesh cup. It is just the filter ONLY! If you need the mesh screen you can find it here Filter/Separator Assembly for Select Hand Vacs including Pet Hair Eraser Hand Vac, Series 2390 and AutoMate Hand Vac, Series 2284W. To clean this Filter/Separator Assembly: Turn power OFF and remove the dirt cup. Grasp filter tabs and lift up to remove the washable filter cup from the dirt cup. Grip the filter cup and turn counterclockwise and lift down to remove filter from filter cup. Tap firmly against the inside of a waste container, removing any visible dirt. Replace filter back into the filter cup then turn clockwise to lock into place. Attach filter cup back into the dirt cup and attach to hand vacuum until it snaps securely in place. NOTE: After heavy usage, you may clean the filter and filter cup by washing it gently by hand in warm water and mild dish detergent. Rinse thoroughly and make certain it is completely dry before replacing it. Separator Assembly for Select Hand Vacuum 1614203
BISSELL Brush Roll for Select Pet Hair Eraser Vacuums 1616277
35.96 USD
Brush Roll for select Pet Hair Eraser Vacuum Cleaners including Series - 2281, 2475, 2461, 2790, 27909. To replace the brush and belt follow these instructions: Unplug and turn vacuum over. Unscrew 10 Phillip-head screws to remove bottom cover. Pull Brush Roll straight out and slide belt off motor gear. Replace Brush Roll and/or belt. Inspect Brush Roll by placing it on its end and spin. The Brush Roll should spin freely multiple times by one flick. If it doesn't, replace the Brush Roll. Inspect Belt, replace it it appears damaged. Place belt back on the Brush Roll Pinch Belt around Brush Roll and hook back around the motor gear Rotate Brush Roll into places and line up end caps Re-attach bottom cover with 10 screws. Brush Roll for Select Pet Hair Eraser Vacuums 1616277