BISSELL Dirty Water Collection Tank for Select Carpet Cleaners 1613172
31.94 USD
Consult the complete sheet with detailed information, compare prices and identify the features of BISSELL Dirty Water Collection Tank for Select Carpet Cleaners 1613172, available at the cost of 31.94 USD; it belongs to the Sportswear category; the seller is BISSELL Dirty Water Collection Tank for Select Carpet Cleaners 1613172 and the manufacturer is BISSELL.
Collection Tank - Titanium - for Select Upright Carpet Cleaners including TurboClean, PowerClean, PowerForce PowerBrush Turbos - Series 2084, 2085, 2089. To empty the Collection Tank please follow these instructions: With foot, press the red power button to turn off unit and then unplug. Release Collection Tank Latches (on each side) by pulling up from the bottom of the latch and then out Carefully remove tank by lifting up on the tank carry handle Carry the Collection Tank to the toilet or sink. To empty, pour contents using opening at back of the tank Rinse collection tank thoroughly and replace on unit Secure latches on both sides of the tank Dirty Water Collection Tank for Select Carpet Cleaners 1613172
Shipping Cost: 7.95 USD
Availability: in stock
Condition: new
Collection Tank - Titanium - for Select Upright Carpet Cleaners including TurboClean, PowerClean, PowerForce PowerBrush Turbos - Series 2084, 2085, 2089. To empty the Collection Tank please follow these instructions: With foot, press the red power button to turn off unit and then unplug. Release Collection Tank Latches (on each side) by pulling up from the bottom of the latch and then out Carefully remove tank by lifting up on the tank carry handle Carry the Collection Tank to the toilet or sink. To empty, pour contents using opening at back of the tank Rinse collection tank thoroughly and replace on unit Secure latches on both sides of the tank Dirty Water Collection Tank for Select Carpet Cleaners 1613172
Shipping Cost: 7.95 USD
Availability: in stock
Condition: new
Compare Similar Products
BISSELL Clean Tank Assembly for Select Upright Carpet Cleaners 1649592
30.94 USD
Clean Tank Assembly for Select Upright Carpet Cleaners 1649592
BISSELL Dirty Tank Assembly for Select CrossWave 1640769
33.94 USD
Dirty Tank Assembly for Select BISSELL CrossWave Multi-Surface Cleaners. Assembly includes bottom tank and lid To Empty the Dirty Water Tank, follow these instructions: Press button on top of dirty water tank and pull out. Remove top of tank by grabbing lid in recessed area on either side of filter to remove. Remove filter from lid. Remove debris from mesh screen of lid. Pull strainer tab up and out of tank to separate debris from dirty water. Dispose of debris. Pour dirty water into sink and rinse. Replace strainer and dirty tank lid. Insert bottom of tank first. Tilt tank towards machine until it clicks into place. Dirty Tank Assembly for Select CrossWave 1640769
BISSELL Brush Roll for Select Carpet Cleaners Cobalt Blue/White Bristles 1626474
31.94 USD
Brush Roll in Cobalt Blue for Select BISSELL Carpet Cleaners, including BISSELL TurboClean DualPro Pet Carpet Cleaner, series 3067, 3072. Follow these instructions on replacing the Belts and Brush Rolls. Unplug the machine. Remove both tanks. With the machine reclined, locate the belt access cover and lay the machine on its side. Remove the 3 screws on the brush access cover using a Phillips-head screwdriver. Remove the access cover to expose the cogged belt and brush roll. Remove the 2 screws on the belt access cover using a Phillips-head screwdriver. Remove the access plate to expose the flat pump belt. If flat pump belt is broken, you may gently remove it from the machine. We will replace this belt in Step 5. Remove the brush cover by lifting straight up. Remove the cogged large pump belt. The brush rolls can be replaced or cleaned at this time, if needed. If the flat pump belt is broken, place a new belt around the red area of the large pulley. Use your thumb to stretch it toward the back of the machine and transfer it onto the metal axle. To replace the cogged pump belt, wrap the new belt around the small metal-toothed pulley. While wrapped around the pulley, stretch and wrap around the brush gear. Brush Roll for Select Carpet Cleaners Cobalt Blue/White Bristles 1626474
BISSELL Dirty Tank Float for Select Carpet Cleaners Cobalt Blue 1641207
35.94 USD
Dirty Tank Float - Cobalt Blue - for Select BISSELL Upright Carpet Cleaners. Click on "View Products" to ensure this fits your machine. For After Cleaning Care with the Dirty Tank Float, follow these instructions: Turn OFF and unplug machine. Pull dirty water tank up and away to remove. Empty dirty water tank. Unscrew ring at bottom of tank to remove float stack. Clean and rinse debris from float to prevent dirty water tank overflow and maintain seal integrity. After cleaning, align arrow on float with tank's notch. Twist ring to lock in place. Ensure alignment to prevent water leakage. Reinstall tank by angling it with bottom first, then tilt and push until it clicks into place. Dirty Tank Float for Select Carpet Cleaners Cobalt Blue 1641207
BISSELL Dirty Water Tank for Select Upright Carpet Cleaners 1649596
29.94 USD
Dirty Water Tank for Select Upright Carpet Cleaners 1649596
BISSELL Handle Assembly - Blue - for Select Carpet Cleaners Colbalt Blue 1626494
47.94 USD
Handle Assembly for Select BISSELL Upright Carpet Cleaners, including TurboClean DualPro Pet Carpet Cleaner, Series 3067, 3072. To Assemble the Handle Assembly, follow these instructions: Insert the Upper Handle at the top of the base until you hear a "click" Wrap cord around lower cord wrap and release hook. At the bottom of the Upper Handle, align the Clean Water Tank with the grooves and slide the tank into place. Handle Assembly - Blue - for Select Carpet Cleaners Colbalt Blue 1626494
BISSELL Wet Tank & Pads for Select Robotic Vacuums 1624766
57.99 USD
Wet Tank & Pads for Select BISSELL Wet Dry Robotic Vacuums, including the BISSELL SpinWave Wet and Dry Robotic Vacuum, Series 2859, 3115. To Fill Your Wet Mop Tank, follow these instructions: Turn the Power Switch OFF. Press the button on top of the tank and pull to remove. Twist to unlock the tank cap and pull up to remove. Fill the tank with water to the "Water" fill line. Fill with a BISSELL formula to the "Formula" fill line. Twist the Mop Tank Cap back into place. Reinstall the tank. Wet Tank & Pads for Select Robotic Vacuums 1624766
BISSELL Handle Assembly - Black - for Select Carpet Cleaners 1626493
47.94 USD
Handle Assembly for Select BISSELL Upright Carpet Cleaners, including PowerForce PowerBrush Pet XL Carpet Cleaner, Series 3071. To Assemble the Handle Assembly, follow these instructions: Insert the Upper Handle at the top of the base until you hear a "click" Wrap cord around lower cord wrap and release hook. At the bottom of the Upper Handle, align the Clean Water Tank with the grooves and slide the tank into place. Handle Assembly - Black - for Select Carpet Cleaners 1626493
BISSELL Dirty Tank Assembly for Select Carpet Cleaners 1644044
29.94 USD
Dirty Tank Assembly for Select Carpet Cleaners 1644044
BISSELL Collection Tank Base for Upright Carpet Cleaners 2030102
38.94 USD
Did you know you should rinse your Tank Base following each time you carpet clean? Rinsing your Tank Bottom with hot water to remove any remaining dirt that may dry inside the tank will ensure your machine performs its best. Collection Tank Base for Upright Carpet Cleaners 2030102
BISSELL Dirty Tank w/ Float - BLACK for Select Carpet Cleaners Black Handle/Black Float 1623831
47.94 USD
Dirty Tank with Float in Black for Select BISSELL Upright Carpet Cleaners including model/series, 2910, 2806, 2987. Follow these instructions to empty the Dirty Tank Turn OFF and unplug your machine. Release Dirty Water Tank by pulling out and up on the latches on the side. Carefully remove tank by lifting up on the Dirty Water Tank Handle. Lift tab on the top of the tank. To empty, pour out dirty water using opening at back of tank. Rinse the tank thoroughly. Reinsert tab into tank. To continue cleaning, align the bottom of the tank to the base and secure into place with latches. Dirty Tank w/ Float - BLACK for Select Carpet Cleaners Black Handle/Black Float 1623831
BISSELL Dirt Tank Black for Select Stick Vacuum 1638012
30.94 USD
Dirt Tank in Black for Select BISSELL Stick Vacuums. Click on "view products" to ensure this fits your machine. To empty the dirt tank, follow these instructions. Power OFF. Press release button on hand vacuum to unlock the dirt tank. Twist dirt tank counter-clockwise to unlock and remove. Press button on front of dirt tank. Dump debris into a waste basket. Dirt Tank Black for Select Stick Vacuum 1638012
BISSELL Dirt Tank for Select Stick Vacuum 1638013
30.94 USD
Dirt Tank for Select BISSELL Stick Vacuums. Click on "view products" to ensure this fits your machine. To empty the dirt tank, follow these instructions. Power OFF. Press release button on hand vacuum to unlock the dirt tank. Twist dirt tank counter-clockwise to unlock and remove. Press button on front of dirt tank. Dump debris into a waste basket. Dirt Tank for Select Stick Vacuum 1638013
BISSELL Handle Assembly for Select Carpet Cleaners Cobalt Blue 1641199
35.94 USD
Handle Assembly - Cobalt Blue - for Select BISSELL Upright Carpet Cleaners. Click on "view products" to ensure this fits your machine. To install the Handle Assembly, simply insert the handle into the machine until it clicks into place. Handle Assembly for Select Carpet Cleaners Cobalt Blue 1641199
BISSELL Handle Assembly for Select Carpet Cleaners - GrapeVine Purple 1642206
35.94 USD
Handle Assembly - GrapeVine Purple - for Select BISSELL Upright Carpet Cleaners. Fits Model 3748. To install the Handle Assembly, simply insert the handle into the machine until it clicks into place. Handle Assembly for Select Carpet Cleaners - GrapeVine Purple 1642206
BISSELL Dirty Tank Cover Assembly - Disco Teal for CrossWave 1609653
36.94 USD
Dirty Tank Cover in Disco Teal for the CrossWave Multi-Surface Cleaner. Dirty Tank Cover Assembly - Disco Teal for CrossWave 1609653
BISSELL Dirt Tank Lid for Select CrossWave Wet Dry Vacuum 1642974
29.94 USD
Dirt Tank Lid for Select BISSELL CrossWave Wet Dry Vacs. Click on "view products" to ensure this fits your machine. Dirt Tank Lid for Select CrossWave Wet Dry Vacuum 1642974
BISSELL Dirt Tank Assembly for Select Upright Vacuums 1636000
42.94 USD
Dirt Tank Assembly for Select Upright Vacuums 1636000
BISSELL Clean Tank Assembly for Select SpinWave Spin Mops 1638724
30.94 USD
Clean Tank Assembly for Select BISSELL SpinWave Spin Mops, including SpinWave + Vac All-in-One Powered Spin-Mop and Vacuum. To fill the Clean Tank Assembly, follow these instructions: Choose your formula - this machine is compatible with BISSELL formulas made for hard surfaces. Always use genuine BISSELL formulas in your machine. Other formulas may harm the machine. Remove tank from foot using center grip. Tank can be set on flat surface if needed. Twist cap to remove. Add warm water (140?F / 60?C max) to water line. Add BISSELL formula to formula line. Close cap. Reinstall tank to machine. It will click into place. Clean Tank Assembly for Select SpinWave Spin Mops 1638724
BISSELL - Little Green Select Carpet Cleaner - Cobalt Blue
129.99 USD
Not every mess calls for a full-size carpet cleaning machine. Use BISSELL Little Green Select portable upholstery and carpet cleaner to spray, scrub and lift away those smaller messes, like dirt and stains, from all types of surfaces. It has powerful suction to easily remove dirt from carpets and stairs, plus it works on car interiors, too! Little Green Select portable deep cleaner is lightweight, so you can use it almost anywhere. And this machine doesn’t just clean up after pets, it helps save them! BISSELL proudly supports BISSELL Pet Foundation and its mission to help save homeless pets. When you buy a BISSELL product, you help save pets, too. We’re proud to design products that help make pet messes, odors and pet homelessness disappear.
BISSELL PowerSteamer PowerBrush Select Upright Carpet Cleaner Marzette Orange 1623
159.99 USD
The PowerSteamer PowerBrush Select upright carpet cleaner has 5 cleaning rows on its DirtLifter Powerbrush a unique and powerful feature on some BISSELL carpet cleaners. This brush has stiff bristles placed in a wavy formation on the rotating brush, helping to scrub and lift the dirt and stains your vacuum cant get. Then powerful suction lifts it away. PowerSteamer PowerBrush Select Upright Carpet Cleaner Marzette Orange 1623
BISSELL Dirt Tank Assembly for Select Vacuums 1628294
37.94 USD
Dirt Tank Assembly for Select BISSELL Upright Vacuum Cleaners. Click on "view products" to see if this Dirt Tank fits your model vacuum cleaner. To Empty the Dirt Tank, follow these instructions: Remove dirt tank by pushing the dirt tank release button on top of the tank handle. Holding dirt tank over garbage bin, press release button on back. Snap bottom back into place and return to machine pushing to lock into place. To Clean the Dirt Tank, follow these instructions: Remove dirt tank by pushing the dirt tank release button on top of the tank handle. Open dirt tank lid by lifting the release latch. Remove primary separator by lifting out of the dirt tank. Container and separator can be washed with hand-warm water. Mild detergent may be used. Rinse well then air dry completely. Remove hose by twisting to unlock and pull up. Check inlet for any clogging before reassembling. Dirt Tank Assembly for Select Vacuums 1628294
BISSELL Dirt Tank for Select Vacuum Cleaners 1622992
40.94 USD
Dirt Tank Assembly for select upright vacuum cleaners including CleanView Swivel Rewind - Series 2252, 2256, 2255, 2258 and PowerClean Swivel Rewind - Series 2256K. Follow these directions to empty the dirt container: Press the Tank Release Button and pull out to remove Dirt Tank Hold Dirt Tank over trash container Press the bottom release button to empty. Once empty, close the lid Twist the cyclone/separator left and pull down to remove from tank Clean cyclone with warm water and mild detergent. Let cyclone/separator completely dry before replacing. To replace fit in place and twist to the right. After emptied place the tank back on vacuum and press firmly until you hear "click" Dirt Tank for Select Vacuum Cleaners 1622992
BISSELL Dirt Tank Assembly with Separator for Select Stick Vacuums 1650774
29.94 USD
Dirt Tank Assembly with Separator for Select Stick Vacuums 1650774
BISSELL Dirt Tank Assembly for Select Vacuums 1631287
34.94 USD
Dirt Tank Assembly for Select BISSELL Upright Vacuum Cleaners. Click on "view products" to see if this fits your machine. To Empty the Dirt Tank, follow these instructions: Press the tank release button and pull out to remove dirt tank. Hold the dirt tank over a trash bin. Press the bottom release button to empty. Twist cyclone clockwise and pull down to remove from tank. Clean cyclone with warm water and mild detergent. Let dry for 24 hours before reinstalling. Twist cyclone counter-clockwise to reinstall. Place tank back on vacuum and press firmly until it clicks into place. Dirt Tank Assembly for Select Vacuums 1631287
BISSELL Dirty Tank Assembly for Select Upright Carpet Cleaners 1649594
34.94 USD
Dirty Tank Assembly for Select Upright Carpet Cleaners 1649594
BISSELL Dirt Tank Assembly for Select Stick Vacuums Silver 1627072
51.94 USD
Dirt Tank Assembly for Select BISSELL Stick Vacuums including BISSELL CleanView Pet Slim Cordless Stick Vac, and PowerEdge Cordless Stick Vac, Series 2903, 2900. To Empty the Dirt Tank, follow these steps: Turn OFF your machine. Remove the Dirt Tank from the Hand Vacuum by pressing the Tank Release Button on the front of the tank. Grab the middle grip of the filter and pull up. This will activate a wiping feature to remove debris from the mesh filter screen. Twisting the grip will remove the filter only. Fully remove the separator from the tank and tap mesh screen on the side of the trash bin. Dump dirt from the tank into the trash bin. Slide the separator back into the tank, ensuring the notch is seated into the tank correctly. Reattach tank by guiding the bottom into the hook on the hand vacuum. Push into place. Dirt Tank Assembly for Select Stick Vacuums Silver 1627072
BISSELL Tank Assembly for Select Upright Vacuums 1649426
30.94 USD
Tank Assembly for Select Upright Vacuums 1649426
BISSELL Dirt Tank Assembly - Grey - for Select Vacuums 1617232
40.94 USD
Dirt Tank Assembly in Grey for Select BISSELL Vacuum Cleaners including the PowerForce Compact, Series 1700 & 2191. Dirt Tank Assembly - Grey - for Select Vacuums 1617232
BISSELL Dry Tank & Filter for Select Robotic Vacuums 1624765
38.94 USD
Dry Tank and Filter for Select BISSELL Robotic Vacuums including the BISSELL SpinWave Robotic Vacuum, Series 2859, and 3115. To use the Robot Vacuum in Dry Mode, follow these instructions: Turn the robot ON. Press the Start/Pause Button to start cleaning. When finished, press the Start/Pause Button again to stop the robot. Return the robot to the dock. Press Start/Pause Button twice. The light ring will flash white as it finds its way back. Turn the Power Switch OFF. Press the button on top of the Dirt Bin and pull to remove. Open filter door by pulling both sides apart. Empty the debris from the Dirt Bin. Remove the filter cover, then the foam and pleated filters. Use the cleaning tool to brush the filter cover and filters. Do NOT wash the filters. With filters removed, rinse the Dirt Bin with tap water. Ensure Dirt Bin is completely dry before reinstalling. Do NOT machine wash the Dirt Bin. Once clean, reinstall the filters and filter cover, close and push back into the machine. Dry Tank & Filter for Select Robotic Vacuums 1624765
BISSELL Dirty Tank Assembly CrossWave Cordless Max 1620626
50.94 USD
Dirty Water Tank for the BISSELL CrossWave Cordless Max Multi-Surface Wet Dry Vac. When the Dirty Water Tank is full, your machine will turn OFF, beep and the Dirty Water Tank Full icon will blink orange on the Digital Display. To remove the Dirty Water Tank, press the button on top of the tank, grab the front handle and pull the tank out Remove the top of the Dirty Water Tank by grasping the recessed areas on each side of the filter and pulling up Separate the hair and debris from the dirty water by grasping the strainer tab and pulling up. Throw the debris into the trash. Pour the dirty water into the sink and rinse the Dirty Water Tank Remove the filter from the top of the Dirty Water Tank by pulling it up Hand wash the filter and screen with warm water and mild detergent. Rinse the bottom of the Dirty Water Tank Cover Leave the parts out to dry before reassembling Once all parts are dry, reassemble the filter and the Dirty Water Tank cover Angle the Dirty Water Tank back into the body of the machine. Insert bottom of the tank first, then pivot the top toward the machine until it "clicks" into place Dirty Tank Assembly CrossWave Cordless Max 1620626
BISSELL Tank Assembly for Select Upright Vacuums 1649804
29.94 USD
Tank Assembly for Select Upright Vacuums 1649804
BISSELL Dirt Tank Assembly for Select Canister Vacuums 1613058
38.94 USD
Dirt Tank Assembly fits Select Canister Vacuum Cleaners including Zing Bagless - Series 2156. Dirt Tank Assembly for Select Canister Vacuums 1613058
BISSELL Dirt Tank - GREEN - for Select Vacuum Cleaners Green/Black Accents 1620990
41.94 USD
NOTE: This Dirt Tank, when ordered as a replacement will be GREEN with Black Accents. Dirt Tank in GRAY for Select Upright Vacuum Cleaners, including Series 2612, 2613, and 2598. Dirt Tank - GREEN - for Select Vacuum Cleaners Green/Black Accents 1620990
BISSELL Dirt Tank for Select Upright Vacuum Cleaners 1647946
32.94 USD
Dirt Tank for Select Upright Vacuum Cleaners 1647946
BISSELL Dirt Tank - Sparkle Silver for Select Vacuum Cleaners 1611229
40.94 USD
Tank Assembly WITHOUT separator for select CleanView Vacuums, including Series: 1813, 1823, 1825 Dirt Tank - Sparkle Silver for Select Vacuum Cleaners 1611229
BISSELL Dirt Tank for Select Upright Vacuums 1640800
32.94 USD
Dirt Tank for Select BISSELL Upright Vacuum Cleaners. Click on "view products" to ensure this fits your machine. Dirt Tank for Select Upright Vacuums 1640800
BISSELL Dirt Tank for Select Upright Vacuums 1640808
32.94 USD
Dirt Tank for Select BISSELL Upright Vacuum Cleaners. Click on "view products" to ensure this fits your machine. Dirt Tank for Select Upright Vacuums 1640808
BISSELL Tank Assembly - Titanium for Select Vacuums 1624039
45.94 USD
NOTE: This Tank Assembly is in Titanium Tank Assembly in Titanium fits Select BISSELL Upright Vacuum Cleaners, including BISSELL MultiClean Allergen Lift-Off Pet, series 2852, 2853, 28522, 2998. To maintain the Tank Assembly and Emptying, follow these instructions: Press the Dirt Tank Release Button and Grab the handle to pull Dirt Tank away from vacuum. Hold the Dirt Tank over a trash bin and press the Empty Button. Once emptied, snap bottom back into place. Return the Dirt Tank to the vacuum by securing the bottom in place first and then pushing back until you hear a "click". Tank Assembly - Titanium for Select Vacuums 1624039