BISSELL Clean Tank Assembly CrossWave X7 1626664
36.05 USD
Consult the complete sheet with detailed information, compare prices and identify the features of BISSELL Clean Tank Assembly CrossWave X7 1626664, available at the cost of 36.05 USD; it belongs to the Cleaning & Drying Accessories category; the seller is BISSELL Clean Tank Assembly CrossWave X7 1626664 and the manufacturer is BISSELL.
Clean Tank Assembly for BISSELL CrossWave X7 Cordless Pet Pro Multi-Surface Wet Dry Vac. To fill the Clean Water Tank, follow these instructions: The Clean Water Tank is located on the back of the machine. To remove, grasp the left and right side of the tank and pull upward. Open the flip cap on the top of the Clean Water Tank. Choose the right BISSELL formula. Fill with hot (140 F / 60 C MAX) tap water to the WATER FILL line. Do not use boiling water. Do not heat water in the microwave. Add cleaning formula to the FORMULA FILL line. Close the flip cap on the top of the Clean Water Tank. On the back of the machine, slide the tank back down into the product. Clean Tank Assembly CrossWave X7 1626664
Shipping Cost: 7.95 USD
Availability: in stock
Condition: new
Clean Tank Assembly for BISSELL CrossWave X7 Cordless Pet Pro Multi-Surface Wet Dry Vac. To fill the Clean Water Tank, follow these instructions: The Clean Water Tank is located on the back of the machine. To remove, grasp the left and right side of the tank and pull upward. Open the flip cap on the top of the Clean Water Tank. Choose the right BISSELL formula. Fill with hot (140 F / 60 C MAX) tap water to the WATER FILL line. Do not use boiling water. Do not heat water in the microwave. Add cleaning formula to the FORMULA FILL line. Close the flip cap on the top of the Clean Water Tank. On the back of the machine, slide the tank back down into the product. Clean Tank Assembly CrossWave X7 1626664
Shipping Cost: 7.95 USD
Availability: in stock
Condition: new
Compare Similar Products
BISSELL Clean Tank Assembly CrossWave HydroSteam 1634589
33.82 USD
Clean Tank Assembly for BISSELL CrossWave HydroSteam Multi-Surface Wet Dry Vac. Clean Tank Assembly CrossWave HydroSteam 1634589
BISSELL Clean Tank Assembly CrossWave OmniForce 1640767
35 USD
Clean Tank Assembly for BISSELL CrossWave OmniForce Multi-Surface Cleaner. To fill the Clean Tank, follow these instructions: Remove clean water tank by pressing latch and tilting tank backward. Open cap on top of tank. Fill with hot (140?F/60?C MAX) tap water to fill line. Do not use boiling water. Do not heat water in microwave. Add cleaning formula to formula fill line. Close cap. Reinsert bottom of tank and tilt tank toward machine until it clicks. Clean Tank Assembly CrossWave OmniForce 1640767
BISSELL Clean Tank Assembly for Select CrossWave 1643010
35.66 USD
Clean Tank Assembly for Select BISSELL CrossWave Multi-Surface Machines. Click on "View products" to ensure this fits your machine. Clean Tank Assembly for Select CrossWave 1643010
BISSELL Clean Tank Lid CrossWave X7 1626665
31.59 USD
Clean Tank Lid for BISSELL CrossWave X7 Cordless Pet Pro Multi-Surface Wet Dry Vac. Clean Tank Lid CrossWave X7 1626665
BISSELL Handle Assembly - GrapeVine Purple - CrossWave X7 1626675
44.54 USD
Handle Assembly in GrapeVine Purple for BISSELL CrossWave X7 Cordless Pet Pro Multi-Surface Wet Dry Vac, series 3279. Handle Assembly - GrapeVine Purple - CrossWave X7 1626675
BISSELL Handle Assembly - Copper Harbor - CrossWave X7 1626674
45.34 USD
Handle Assembly in Copper Harbor for BISSELL CrossWave X7 Cordless Pet Pro Multi-Surface Wet Dry Vac. Handle Assembly - Copper Harbor - CrossWave X7 1626674
BISSELL Dirty Tank Assembly CrossWave Cordless Max 1620626
50.84 USD
Dirty Water Tank for the BISSELL CrossWave Cordless Max Multi-Surface Wet Dry Vac. When the Dirty Water Tank is full, your machine will turn OFF, beep and the Dirty Water Tank Full icon will blink orange on the Digital Display. To remove the Dirty Water Tank, press the button on top of the tank, grab the front handle and pull the tank out Remove the top of the Dirty Water Tank by grasping the recessed areas on each side of the filter and pulling up Separate the hair and debris from the dirty water by grasping the strainer tab and pulling up. Throw the debris into the trash. Pour the dirty water into the sink and rinse the Dirty Water Tank Remove the filter from the top of the Dirty Water Tank by pulling it up Hand wash the filter and screen with warm water and mild detergent. Rinse the bottom of the Dirty Water Tank Cover Leave the parts out to dry before reassembling Once all parts are dry, reassemble the filter and the Dirty Water Tank cover Angle the Dirty Water Tank back into the body of the machine. Insert bottom of the tank first, then pivot the top toward the machine until it "clicks" into place Dirty Tank Assembly CrossWave Cordless Max 1620626
BISSELL Dirty Tank Cover Assembly - Disco Teal for CrossWave 1609653
38.86 USD
Dirty Tank Cover in Disco Teal for the CrossWave Multi-Surface Cleaner. Dirty Tank Cover Assembly - Disco Teal for CrossWave 1609653
BISSELL Dirty Tank Assembly for Select CrossWave 1648286
29.94 USD
Dirty Tank Assembly for Select CrossWave 1648286
BISSELL Dirty Tank Assembly for Select CrossWave 1640769
43.34 USD
Dirty Tank Assembly for Select BISSELL CrossWave Multi-Surface Cleaners. Assembly includes bottom tank and lid To Empty the Dirty Water Tank, follow these instructions: Press button on top of dirty water tank and pull out. Remove top of tank by grabbing lid in recessed area on either side of filter to remove. Remove filter from lid. Remove debris from mesh screen of lid. Pull strainer tab up and out of tank to separate debris from dirty water. Dispose of debris. Pour dirty water into sink and rinse. Replace strainer and dirty tank lid. Insert bottom of tank first. Tilt tank towards machine until it clicks into place. Dirty Tank Assembly for Select CrossWave 1640769
BISSELL Clean Tank Assembly - CrossWave Multi-Surface Cleaner 1609593
33 USD
Clean Tank Assembly for your CrossWave All-in-One Multi-Surface Cleaner. Add your favorite CrossWave Formula and water and you're ready to clean! Clean Tank Assembly - CrossWave Multi-Surface Cleaner 1609593
BISSELL Clean Tank Assembly for CrossWave Wet/Dry Vacuum 1614237
33 USD
Clean Water Tank Assembly for the BISSELL CrossWave Pet, Series 2305, 2306, 2328. To fill your clean water tank follow these instructions: The clean water tank is located on the back of the machine. Lift the clean water tank straight up to remove from the machine Unscrew the cap from the clean water tank. The clean water tank has two measuring volumes depending on the amount of space you would like to clean. For large area cleaning (up to 700 sq ft) - fill formula tank with warm tap water to the second water fill line. Then add formula to the second formula fill line. For small area cleaning ( Clean Tank Assembly for CrossWave Wet/Dry Vacuum 1614237
BISSELL Dirty Tank Cover Assembly - ChaCha Lime for CrossWave 1608697
38.86 USD
Dirty Tank Cover in ChaCha Lime for the Crosswave Multi-Surface Cleaner. Dirty Tank Cover Assembly - ChaCha Lime for CrossWave 1608697
BISSELL Antibacterial Clean Tank Assembly w/ Cap - Black - AFTER Serial Number 21273 1626414
37.94 USD
NOTE: THIS PART FITS MACHINES WITH A SERIAL NUMBER OF 21273 AND AFTER! Antibacterial Clean Tank Assembly with Cap in BLACK for Select BISSELL Carpet Cleaners including TurboClean PowerBrush Lightweight Pet Carpet Cleaners, models 28068, 29879 Antibacterial Clean Tank Assembly w/ Cap - Black - AFTER Serial Number 21273 1626414
BISSELL Antibacterial Clean Tank Assembly w/ Cap - AFTER Serial Number 21273 1626412
35.94 USD
NOTE: THIS PART FITS MACHINES WITH A SERIAL NUMBER OF 21273 AND AFTER! Antibacterial Clean Tank Assembly with Cap Select BISSELL Carpet Cleaners including PowerForce PowerBrush Pet Advanced Carpet Cleaner, series 2910. Antibacterial Clean Tank Assembly w/ Cap - AFTER Serial Number 21273 1626412
BISSELL CrossWave X7 Cordless Pet Pro Multi-Surface Wet Dry Vacuum Exclusive Bundle Titanium/Black/Copper Harbor Accents 327
499.99 USD
It vacuums and washes at the same time, across sealed hard floors and area rugs, combining cleaning steps and saving you time. It's perfect for grab-and-go cleaning of frequent pet messes with up to 30 minutes* of hassle-free, cordless run time, and it weighs just over 10.5 lbs. Our pet parent engineers incorporated three different cleaning modes: Hard Floor Mode, Area Rug Mode and TURBO PET Mode to boost cleaning performance, especially for pet and everyday stuck-on messes. CrossWave X7 Cordless Pet Pro Multi-Surface Cleaner also has LED headlights to illuminate pet hair, dirt and debris while cleaning along baseboards and in corners. And unlike when you use a mop and bucket, there's no need to worry about putting dirty water on the floor while you clean, since our Two-Tank Technology keeps the clean and dirty water separate. Additionally, with the high-tech design and WiFi enabled feature, you can connect to the BISSELL Connect app to access helpful usage tips, alerts and reorder accessories. When you're done cleaning, CrossWave X7 Cordless Pet Pro multi-surface cleaner cleans itself! It has a self-cleaning cycle that rinses the brush roll and inside of the CrossWave machine with clean water, so there's less clean-up after cleaning. Plus, it comes with a Multi-Surface Brush Roll, two, PET Multi-Surface Brush Rolls, Wood Floor Brush Roll, trial-size PET Clean + Natural, trial-size Hard Floor Sanitize, trial-size PET Multi-Surface with Febreze Freshness, and trial-size Wood Floor formulas. And this machine doesn't just clean up after pets, it helps save them! BISSELL proudly supports BISSELL Pet Foundation and its mission to help save homeless pets. When you buy a BISSELL product, you help save pets too. We're proud to design products that help make pet messes, odors, and pet homelessness disappear.
BISSELL CrossWave X7 Cordless Pet Pro Multi-Surface Wet Dry Vacuum Pearl White/Black/ Grapevine Purple Accents 3279
499.99 USD
It vacuums and washes at the same time, across sealed hard floors and area rugs, combining cleaning steps and saving you time. It's perfect for grab and go cleaning of frequent pet messes with up to 30 minutes* of hassle-free cordless run time, and it weighs just over 10.5 lbs. Our pet parent engineers incorporated three different cleaning modes: Hard Floor Mode, Area Rug Mode and TURBO PET Mode to boost cleaning performance, especially for pet and everyday stuck-on messes. CrossWave X7 Cordless Pet Pro multi-surface cleaner also has LED headlights to illuminate pet hair, dirt and debris while cleaning along baseboards and in corners. And unlike when you use a mop and bucket, there's no need to worry about putting dirty water on the floor while you clean, since our Two-Tank Technology keeps the clean and dirty water separate. Additionally, with the high-tech design and WiFi enabled feature, you can connect to the BISSELL Connect App to access helpful usage tips, alerts and reorder accessories. When you're done cleaning, CrossWave X7 Cordless Pet Pro cleans itself! It has a self-cleaning cycle that rinses the brush roll and inside of the CrossWave with clean water, so there's less clean-up after cleaning. Plus, it comes with trial-size Hard Floor Sanitize and PET Multi-Surface with Febreze Freshness formulas, PET Multi-Surface Brush Roll, and a Wood Floor Brush Roll. And this machine doesn't just clean up after pets, it helps save them! BISSELL proudly supports BISSELL Pet Foundation and its mission to help save homeless pets. When you buy a BISSELL product, you help save pets, too. We're proud to design products the help make pet messes, odors and pet homelessness disappear.
BISSELL CrossWave X7 Cordless Pet Pro Multi-Surface Wet Dry Vacuum Titanium/Black/Copper Harbor Accents 3011
499.99 USD
Cleaning up after pets just got easier thanks to BISSELL CrossWave X7 Cordless Pet Pro Multi-Surface Cleaner, our best CrossWave machine for homes with pets. It combines cleaning steps and saves you time by vacuuming and washing at the same time, across hard floors and area rugs. It weighs just over 10.5 pounds and provides up to 30 minutes* of cordless cleaning, so it's perfect for quickly cleaning frequent pet messes. It also has three cleaning modes to choose from: TURBO PET Mode to boost cleaning performance for tough pet messes and everyday stuck-on messes, Area Rug Mode and Hard Floor Mode. CrossWave X7 Cordless Pet Pro Multi-Surface Cleaner also has LED headlights to illuminate pet hair, dirt and debris while cleaning along baseboards and in corners. And unlike when you use a mop and bucket, there's no need to worry about putting dirty water on the floor while you clean, because our Two-Tank Technology keeps the clean and dirty water separate. When you're all done cleaning, this machine cleans itself. Its self-cleaning cycle rinses the brush roll and the inside of your CrossWave machine with clean water, so there's less clean-up after the clean. Plus, it comes with two trial-size bottles of our PET Clean + Natural formula and two PET Multi-Surface Brush Rolls. But this machine doesn't just clean up after pets, it helps save them, too. BISSELL proudly supports BISSELL Pet Foundation and its mission to help save homeless pets. When you buy a BISSELL product, you help save pets too. We're proud to design products that help make pet messes, odors, and pet homelessness disappear. BISSELL CrossWave X7 Cordless Pet Pro Multi-Surface Wet Dry Vacuum Titanium/Black/Copper Harbor Accents 3011
BISSELL Antibacterial Clean Tank Assembly w/ Cap - Electric Green - AFTER Serial Number 21273 1626411
37.94 USD
NOTE: THIS PART FITS MACHINES WITH A SERIAL NUMBER OF 21273 AND AFTER! Antibacterial Clean Tank Assembly with Cap in ELECTRIC GREEN for Select BISSELL Carpet Cleaners including TurboClean PowerBrush Lightweight Pet Carpet Cleaners, models 2806, 2987, 29878. Antibacterial Clean Tank Assembly w/ Cap - Electric Green - AFTER Serial Number 21273 1626411
BISSELL Dirty Tank Lid - GrapeVine Purple - CrossWave X7 1626680
40.03 USD
Dirty Tank Lid in GrapeVine Purple for BISSELL CrossWave X7 Cordless Pet Pro Multi-Surface Wet Dry Vac. Dirty Tank Lid - GrapeVine Purple - CrossWave X7 1626680
BISSELL Clean Tank w/ Cap CrossWave Cordless Max 1620629
35.32 USD
Clean Tank with the Cap for the BISSELL CrossWave Cordless Max Multi-Surface Wet/Dry Vac. To Fill the Clean Water Tank, follow these instructions: The Clean Water Tank is located on the back of the machine. To remove, use the finger groove above at the top of the tank to grab and pivot the tank backwards Unscrew the cap from the bottom of the Clean Water Tank Choose the right BISSELL formula The Clean Water tank has a Large Area volume and a Small Area volume. Pick one of the measuring volumes that best suits the space that you would like to clean. The Large Area fill lines are for areas up to 700 sq ft. The Small Area fill lines are for areas under 350 sq. ft Use warm (140F/60C max) tap water and add the appropriate BISSELL formula. Tap water with hardness greater than 35 ppm is recommended for use in machine to ensure the Dirty Water Tank full detection sensor works properly Screw the cap back on the Clean Water tank. On the back of the machine, align the bottom of the Clean Water Tank with the grooves and pivot the tank until it "clicks" into place Clean Tank w/ Cap CrossWave Cordless Max 1620629
BISSELL Antibacterial Clean Tank Assembly w/ Cap - Electric Blue - AFTER Serial Number 21273 1626413
35.94 USD
NOTE: THIS PART FITS MACHINES WITH A SERIAL NUMBER OF 21273 AND AFTER! Antibacterial Clean Tank Assembly with Cap in ELECTRIC BLUE for Select BISSELL Carpet Cleaners including TurboClean PowerBrush Lightweight Pet Carpet Cleaners, model 28062 Antibacterial Clean Tank Assembly w/ Cap - Electric Blue - AFTER Serial Number 21273 1626413
BISSELL Handle Assembly - Disco Teal for CrossWave 1609659
40.94 USD
Handle Assembly in Disco Teal for the CrossWave Multi-Surface Cleaner. Handle Assembly - Disco Teal for CrossWave 1609659
BISSELL Dirty Tank for CrossWave Wet/Dry Vacuum 1614239
34.35 USD
Dirty Water Tank for CrossWave Pet Wet/Dry Vac, Series 2305, 2306, 2328. Follow these instructions to properly maintain the Dirt Tank on your BISSELL CrossWave Pet. To release dirty water tank, press down on recessed button on the top of the dirty tank. Grab the front handle while pressing down on button and pull dirty water tank away from the unit. Grasp top of dirty water tank in recessed areas on each side of the filter and pull upward to remove the top of the tank. Remove strainer from dirty tank then throw debris in the trash. Pour dirty water out. Rinse the inside of the dirty water tank. Remove the filter from the top of the dirty water tank by pulling it up. Hand wash the vacuum filter and screen with warm water and mild detergent Rinse the float located at the bottom of the top of the dirty water tank. If the inside area where the dirty water tank sits is dirty, wipe it clean with a rag or towel. Leave parts out to dry before reassembling. Place vacuum filter back into the top of the dirty water tank Place strainer back into the dirty water tank Once parts are dry, reassemble and replace the top of the dirty water tank Angle the dirt tank back into body of machine inserting bottom first. Then tilt the top of the dirt tank toward the machine and push into place until you hear a click. Dirty Tank for CrossWave Wet/Dry Vacuum 1614239
BISSELL Handle Assembly CrossWave OmniForce Black 1640766
42.16 USD
Handle Assembly fits BISSELL CrossWave OmniForce Multi-Surface Cleaner. To assemble the Handle, firmly insert the handle into the body of the machine until it clicks. Handle Assembly CrossWave OmniForce Black 1640766
BISSELL Foot Window Assembly - Disco Teal for CrossWave 1609656
43.69 USD
Foot Window Assembly for the CrossWave Multi-Surface Cleaner in Disco Teal. Foot Window Assembly - Disco Teal for CrossWave 1609656
BISSELL Handle Assembly CrossWave Cordless Max 1620631
43.27 USD
Handle Assembly for the BISSELL CrossWave Cordless Max Multi-Surface Wet/Dry Vac. To attach the handle, insert the handle into the body of the machine until you hear a "click." Handle Assembly CrossWave Cordless Max 1620631
BISSELL Handle Assembly for Select CrossWave 1642994
34.32 USD
Handle Assembly for Select BISSELL CrossWave Multi-Surface Cleaners. Click on "View Products" to ensure this fits your machine. Handle Assembly for Select CrossWave 1642994
BISSELL Handle Assembly for Select CrossWave 1648285
30.94 USD
Handle Assembly for Select CrossWave 1648285
BISSELL Handle Assembly - ChaCha Lime for Crosswave 1608700
40.94 USD
Handle Assembly in ChaCha Lime for the Crosswave Multi-Surface Cleaner. Handle Assembly - ChaCha Lime for Crosswave 1608700
BISSELL Clean Tank Receiver for Select Upright Carpet Cleaners 1649612
30.94 USD
Clean Tank Receiver for Select Upright Carpet Cleaners 1649612
BISSELL Handle Assembly - Copper Harbor - CrossWave HydroSteam 1634583
42.68 USD
Handle Assembly in Copper Harbor for BISSELL CrossWave HydroSteam Multi-Surface Wet Dry Vac. Handle Assembly - Copper Harbor - CrossWave HydroSteam 1634583
BISSELL Clean Tank Assembly for Select SpinWave Spin Mops 1638724
36.68 USD
Clean Tank Assembly for Select BISSELL SpinWave Spin Mops, including SpinWave + Vac All-in-One Powered Spin-Mop and Vacuum. To fill the Clean Tank Assembly, follow these instructions: Choose your formula - this machine is compatible with BISSELL formulas made for hard surfaces. Always use genuine BISSELL formulas in your machine. Other formulas may harm the machine. Remove tank from foot using center grip. Tank can be set on flat surface if needed. Twist cap to remove. Add warm water (140?F / 60?C max) to water line. Add BISSELL formula to formula line. Close cap. Reinstall tank to machine. It will click into place. Clean Tank Assembly for Select SpinWave Spin Mops 1638724
BISSELL Clean Tank Cap for Select CrossWave 1640768
29.68 USD
Clean Tank Cap for BISSELL CrossWave Multi-Surface Cleaners. Clean Tank Cap for Select CrossWave 1640768
BISSELL Handle Assembly for Select CrossWave 1650561
35.94 USD
Handle Assembly for Select CrossWave 1650561
BISSELL Clean Tank Cap for Select Portable Carpet Cleaners 1648330
30.94 USD
Clean Tank Cap for Select Portable Carpet Cleaners 1648330
BISSELL Dirt Tank for Select CrossWave Wet Dry Vacuum 1642973
35 USD
Dirt Tank for Select BISSELL CrossWave Wet Dry Vacs. Bottom Tank Only. Click on "view products" to ensure this fits your machine. Dirt Tank for Select CrossWave Wet Dry Vacuum 1642973
BISSELL Charger CrossWave X7 1625512
39.96 USD
Charger for the BISSELL CrossWave X7 Cordless Pet Pro Multi-Surface Wet Dry Vac. Charger CrossWave X7 1625512
BISSELL Foot Window Assembly - ChaCha Lime for CrossWave 1608698
43 USD
Front Window Assembly for the Crosswave Multi-Surface Cleaner in ChaCha Lime. Foot Window Assembly - ChaCha Lime for CrossWave 1608698