BISSELL Docking Station for Select Robotic Vacuums 1624770
30.94 USD
Examine the detailed sheet with complete information, compare prices and find features for BISSELL Docking Station for Select Robotic Vacuums 1624770, on sale at the price of 30.94 USD; it falls into the Vacuum Cleaners category; the product is sold by BISSELL Docking Station for Select Robotic Vacuums 1624770 and is made by BISSELL.
Docking Station for Select BISSELL Robotic Vacuums, including the BISSELL SpinWave Wet and Dry Robotic Vacuum, Series 2859, 3115. Follow these instructions for Docking and Charging your Robot: Note: The Docking Station and Docking Tray must be installed on a hard surface. The robot's soft surface sensors prevent it from cleaning carpets and area rugs in mop mode. Be sure the device is near your WiFi router and the robot is fully charged or in the dock during the paring process. Place the back of the Docking Tray firmly against a wall. Ensure there are at least 40 inches to one side, 40 inches to the opposing side and no obstructions in the front. Tip the Docking Station into the Docking Tray. Insert the Docking Station Power Adapter plug into the port on the side of the Docking Station. Plug the other end into the wall outlet. Turn the robot ON and put it on the Docking Station. The first charge will take 4-5 hours. Docking Station for Select Robotic Vacuums 1624770
Shipping Cost: 7.95 USD
Availability: in stock
Condition: new
Docking Station for Select BISSELL Robotic Vacuums, including the BISSELL SpinWave Wet and Dry Robotic Vacuum, Series 2859, 3115. Follow these instructions for Docking and Charging your Robot: Note: The Docking Station and Docking Tray must be installed on a hard surface. The robot's soft surface sensors prevent it from cleaning carpets and area rugs in mop mode. Be sure the device is near your WiFi router and the robot is fully charged or in the dock during the paring process. Place the back of the Docking Tray firmly against a wall. Ensure there are at least 40 inches to one side, 40 inches to the opposing side and no obstructions in the front. Tip the Docking Station into the Docking Tray. Insert the Docking Station Power Adapter plug into the port on the side of the Docking Station. Plug the other end into the wall outlet. Turn the robot ON and put it on the Docking Station. The first charge will take 4-5 hours. Docking Station for Select Robotic Vacuums 1624770
Shipping Cost: 7.95 USD
Availability: in stock
Condition: new
Compare Similar Products
BISSELL Charging Dock for Select CrossWave 1640068
45.94 USD
Charging Dock for Select BISSELL CrossWave Multi-Surface Cleaners. Charging Dock for Select CrossWave 1640068
BISSELL Charger ICONpet Robotic Vacuum 1618622
32.94 USD
Charger for the BISSELL ICONpet Robotic Vacuum Follow these instructions for Docking and Charging your Robot: To help the robot find its home, we recommend at least 40 inches (1 meter) of space between the dock and any walls or obstacles around it. Choose a spot with a good WiFi signal in your home. Set up the dock in a central part of your home to help improve docking success. For best docking performance, dock should be on hard floor surface. Robot may spend up to 20 minutes searching for dock when the battery is low. Plug the Power Adapter into the wall and the back of the dock. The light will illuminate when the dock is ON. Turn the Power Switch on the bottom of the robot ON (I). Place the robot on the dock. The Battery Status Light will flash to indicate charging. Charge for 4 hours for maximum cleaning time. Charger ICONpet Robotic Vacuum 1618622
BISSELL Charger 14. 4V for Select Stick Vacuums 1627824
32.94 USD
Charger - 14.4V for Select BISSELL Stick Vacuums including BISSELL ReadyClean Cordless XRT 14.4V Stick Vacuum, Series 3192. To Charge your ReadyClean Cordless, follow these instructions: Insert foot into body of the vacuum until you hear a "click." Insert charging adapter plug into the charging port on the back of the vacuum. Plug the adapter into the wall outlet. Charge completely for 4 hours prior to first use. Charger 14. 4V for Select Stick Vacuums 1627824
BISSELL Docking Station ICONpet Robotic Vacuum 1618621
38.94 USD
Docking Station for the BISSELL ICONpet Robotic Vacuum. Follow these instructions for Docking and Charging your Robot: To help the robot find its home, we recommend at least 40 inches (1 meter) of space between the dock and any walls or obstacles around it. Choose a spot with a good WiFi signal in your home. Set up the dock in a central part of your home to help improve docking success. For best docking performance, dock should be on hard floor surface. Robot may spend up to 20 minutes searching for dock when the battery is low. Plug the Power Adapter into the wall and the back of the dock. The light will illuminate when the dock is ON. Turn the Power Switch on the bottom of the robot ON (I). Place the robot on the dock. The Battery Status Light will flash to indicate charging. Charge for 4 hours for maximum cleaning time. Docking Station ICONpet Robotic Vacuum 1618621
BISSELL Front Nozzle Assembly 1632966
28.94 USD
Front Nozzle Assembly for Select BISSELL CrossWave Wet Dry Vacs. Click on View Products to see if this Front Nozzle Assembly fits your CrossWave Front Nozzle Assembly 1632966
BISSELL Dirty Tank 1632964
37.94 USD
Dirty Tank for Select BISSELL CrossWave Wet Dry Vacs. Click on View Products to see if this Dirty Tank fits your CrossWave Dirty Tank 1632964
BISSELL Charging Cord for Select CrossWave 1657704
28.94 USD
Charging Cord for Select CrossWave 1657704
BISSELL Charging Dock for Select CrossWave Wet Dry Vacuum 1642477
56.94 USD
Charging Dock for Select BISSELL CrossWave Multi-Surface Wet Dry Vacs. Click on "view products" to ensure this fits your machine. Charging Dock for Select CrossWave Wet Dry Vacuum 1642477
BISSELL Dock Assembly for Select CrossWave 1657701
35.94 USD
Dock Assembly for Select CrossWave 1657701
BISSELL Dirty Tank Assembly for Select CrossWave 1661894
30.94 USD
Dirty Tank Assembly for Select CrossWave 1661894
BISSELL Dirty Tank Assembly for Select CrossWave 1640769
33.94 USD
Dirty Tank Assembly for Select BISSELL CrossWave Multi-Surface Cleaners. Assembly includes bottom tank and lid To Empty the Dirty Water Tank, follow these instructions: Press button on top of dirty water tank and pull out. Remove top of tank by grabbing lid in recessed area on either side of filter to remove. Remove filter from lid. Remove debris from mesh screen of lid. Pull strainer tab up and out of tank to separate debris from dirty water. Dispose of debris. Pour dirty water into sink and rinse. Replace strainer and dirty tank lid. Insert bottom of tank first. Tilt tank towards machine until it clicks into place. Dirty Tank Assembly for Select CrossWave 1640769
BISSELL Handle Assembly for Select CrossWave 1648285
28.94 USD
Handle Assembly for Select CrossWave 1648285
BISSELL Dirt Tank Assembly for Select CrossWave Wet Dry Vacuum 1642976
32.94 USD
Dirt Tank Assembly for Select BISSELL CrossWave Wet Dry Vacs. Includes tank and lid. Click on "view products" to ensure this fits your machine. Dirt Tank Assembly for Select CrossWave Wet Dry Vacuum 1642976
BISSELL Dirt Tank Lid for Select CrossWave Wet Dry Vacuum 1642974
29.94 USD
Dirt Tank Lid for Select BISSELL CrossWave Wet Dry Vacs. Click on "view products" to ensure this fits your machine. Dirt Tank Lid for Select CrossWave Wet Dry Vacuum 1642974
BISSELL Handle Assembly for Select CrossWave Wet Dry Vacuum 1642971
30.94 USD
Handle Assembly for Select BISSELL CrossWave Multi-Surface Wet Dry Vacs. Click on "view products" to make sure this fits your CrossWave. Handle Assembly for Select CrossWave Wet Dry Vacuum 1642971
BISSELL Charging Adapter for Select Cordless Vacuums 1610982
38.94 USD
Charging Adapter fits select Cordless Vacuums including AirRam 1984 Series and Multi Hand Vac 1985 Series. Charging Adapter for Select Cordless Vacuums 1610982
BISSELL Brush Roll Cover for Select CrossWave 1643005
33.94 USD
Brush Roll Cover for Select BISSELL CrossWave Wet Dry Multi-Surface. Click on "view products" to ensure this fits with your machine. Brush Roll Cover for Select CrossWave 1643005
BISSELL Charging Base CrossWave X7 1631828
46.94 USD
Charging Base for BISSELL CrossWave X7 Cordless Pet Pro Multi-Surface Wet Dry Vac, series 3011, 3055, 3276, 3277, 3279. Follow these instructions to charge your BISSELL CrossWave X7 Cordless Pet Pro Multi-Surface Wet Dry Vac: Plug the charging cord into the bottom of the Charging Base. Then, plug the adapter into a suitable wall outlet. Place your machine onto the dock to charge. The Battery Lift Indicator will illuminate when charging. For maximum run time, charge the machine for 4 hours. For After Cleaning Care with the Charging Base, follow these instructions: Place the machine on the Charging Base. Make sure the solution in the clean water tank reaches the Clean Out Cycle line. If it does not, fill tank with water to that line. Note: for best results, run the Clean Out Cycle no more than two times after each cleaning session. Empty the dirty water tank prior to starting the Clean Out Cycle. Push the Clean Out Cycle Button to start the 40-second cycle. Empty the dirty water tank. Charging Base CrossWave X7 1631828
BISSELL Storage Tray With Charger CrossWave Cordless Max 1620634
45.94 USD
To Charge the Battery - make sure the machine is fully charged before first use. To check the battery status, remove the machine from the dock and turn it ON by pressing the Power Button. You'll know the battery is fully charged when all three white status lights are illuminated
BISSELL Handle Assembly for Select CrossWave Low Key Gold 1657250
31.94 USD
Handle Assembly for Select CrossWave Low Key Gold 1657250
BISSELL Storage Tray 1632968
29.94 USD
Storage Tray Base for Select BISSELL CrossWave Wet Dry Vacs. Click on View Products to see if this Storage Tray Base fits your CrossWave. Storage Tray 1632968
BISSELL Brush Roll Cover for Select CrossWave Wet Dry Vacuum 1642975
28.94 USD
Brush Roll Cover for Select BISSELL CrossWave Wet Dry Vacs. Click on "view products" to ensure this fits your machine. Brush Roll Cover for Select CrossWave Wet Dry Vacuum 1642975
BISSELL Charger for Select Hand Vacuums 1614206
32.94 USD
Charger for Select Hand Vacuums, including AutoMate Car Hand Vac, Series 2284W. ALWAYS TURN UNIT OFF PRIOR TO CHARGING. Failing to do so may result in battery not fully charging Insert charging adapter plug into the charging port on the back of the unit. Plus the adapter into the wall outlet. The power LED lights will illuminate when charging Charge the unit completely for 8 hours prior to first use. NOTE: The LED light will blink RED when charging and turn GREEN once fully charged. After 10 minutes of being fully charged, the GREEN light will flash once per minute. The adapter may become warm during charging - this is normal. Charger for Select Hand Vacuums 1614206
BISSELL Brush Roll with Cap for Select CrossWave 1640064
31.94 USD
Brush Roll with Cap for Select BISSELL CrossWave Multi-Surface Cleaners. To remove the Brush Roll from machine, follow these instructions: Release the brush roll window by pressing button on window and rotate window towards you. Pull Brush Roll tab to remove. Place Brush Roll in brush holder on dock to dry. If Brush Roll is still dirty, it can be hand washed with mild detergent and place in Brush Roll holder on charging tray to dry. For best results, replace brush roll every 3 months. To replace Brush Roll back to machine, insert right side of Brush Roll first and rotate downward until tab on left side of brush is locked in place. Reinstall window by lining up tabs on bottom edges of foot and rotating towards machine. Press down until window clicks into place. Brush Roll with Cap for Select CrossWave 1640064
BISSELL Wall Mount with 1 Tool Holder for Select Stick Vacuums 1627076
36.94 USD
Wall Mount with One Tool Holder for Select BISSELL Stick Vacuum Cleaners, including Series 2900, 3080B). To install the wall mount, follow these instructions: Install your Wall Storage and Charging Station at least 4 feet to allow the machine to hang comfortably. Using a level, mark the screw hole locations on the wall with a pencil. Insert tool holder on the side of the wall mount. Screw the wall mount into a wall. Ensure the mount is high enough up off the ground for the vacuum to hang comfortably. Screwing into a wall stud will provide best support. To install the charging cord, remove the power cable clip toward you from the wall. Insert the charging cord. Secure the cable by pushing the power cable clip back in towards the wall Hang the vacuum on the center storage piece and insert tools on the tool holder provided. Plug the power adapter into the wall and place the machine on the Wall Storage & Charging Station for charging. Wall Mount with 1 Tool Holder for Select Stick Vacuums 1627076
BISSELL Charger for Select Portable Carpet Cleaners 1638675
34.94 USD
Charger for select BISSELL Portable Carpet Cleaners. To charge your machine, follow these instructions: NOTE: For maximum run time (up to 30 minutes in Eco mode), charge for 4 hours before use. Make sure machine is OFF. The charging port door slides out of the way when charger is inserted. Insert charger into port. Plug charger into a wall outlet. The battery status indicator lights will illuminate when charging. Charger for Select Portable Carpet Cleaners 1638675
BISSELL Battery for Select Stick Vacuums 4054
59.99 USD
Battery for Select BISSELL Stick Vacuums. Click on "View Products" to ensure this Battery fits your Stick Vacuum. To charge the Battery, follow these instructions: Turn off the vacuum and press/hold battery release button to remove battery from its compartment. Slide battery into charging dock until it clicks into place. Plug charger into wall. Slide out to remove battery from charger. Align grooves on battery with grooves of battery compartment. Glide battery into compartment until it clicks into place. To Charge with the Wall Mount & Charging Station, follow these instructions Turn vacuum OFF and press/hold battery release button. Instert battery into wall mount charger until it clicks. Lift up battery ro remove from wall mount charger. Battery for Select Stick Vacuums 4054
BISSELL 10. 8V Charger for Select Cordless Stick Vacuums 1627823
30.94 USD
10.8V Charger for Select BISSELL Stick Vacuums including ReadyClean Cordless 10.8V Stick Vacuum, Series 3190. To assemble and use the Charger, follow these instructions: Insert foot into body of the vacuum until you hear a "click" Insert charging adapter plug into the charging port on the back of the machine. Plug the adapter into the wall outlet. Charge the machine completely for at least 4 hours prior to first use. 10. 8V Charger for Select Cordless Stick Vacuums 1627823
BISSELL Wall Mount with 2 Tool Holders for Select Stick Vacuums 1627077
36.94 USD
Wall Mount with 2 Tool Holders fits Select BISSELL Stick Vacuums Including Series, 2903, 29032, 29037, 29038, 3080. To install the Wall Mount, follow these instructions: Install your Wall Storage and Charging Station at least 4 feet to allow the machine to hang comfortably. Using a level, mark the screw hole locations on the wall with a pencil. Insert tool holder on the side of the wall mount. Screw the wall mount into a wall. Ensure the mount is high enough up off the ground for the vacuum to hang comfortably. Screwing into a wall stud will provide best support. To install the charging cord, remove the power cable clip from the Wall Storage & Charging Station. Insert the charging cord. Secure the cable with the charging cable clip. Hang the vacuum on the center storage piece and insert tools on the tool holder provided. Plug the power adapter into the wall and place the machine on the Wall Storage & Charging Station for charging. Wall Mount with 2 Tool Holders for Select Stick Vacuums 1627077
BISSELL Charger 1632969
34.94 USD
Charger for Select BISSELL CrossWave Cordless Wet Dry Vacs. Click on View Products to see if this Charger fits your BISSELL CrossWave Cordless. Charger 1632969
BISSELL Charger for Select SpinWave Spin Mops 1640762
31.94 USD
Charger for Select SpinWave Spin Mops, including SpinWave + Vac All-in-One Powered Spin-Mop and Vacuum. Important Charging Information: Plug in the machine immediately upon receiving. For maximum run time (up to 70 minutes in Wet Mop-Only mode) charge for 3 hours before use. If planning to store for over 6 months, ensure battery is fully charged before storage. To Charge the Machine, follow these instructions: Insert handle into body until it clicks into place. Before charging, ensure machine is OFF. Plug charging adapter into machine and then into a wall outlet. Battery status indicator lights will illuminate. Battery indicator lights will blink during charging and illuminate fully at 70% charge. When fully charged, lights will turn off. Your machine has an LED light display that will turn on when power button is pushed to show battery life status. Charger for Select SpinWave Spin Mops 1640762