Audio-Technica - AT-VM95E/H Headshell & MM Cartridge Combo Kit - Green
109 USD
Browse the detailed sheet with complete information, compare prices and identify the features of Audio-Technica - AT-VM95E/H Headshell & MM Cartridge Combo Kit - Green, offered at the cost of 109 USD; it belongs to the Hifi & Audio Accessories category; the seller is Audio-Technica - AT-VM95E/H Headshell & MM Cartridge Combo Kit - Green and the manufacturer is Technica.
The AT-VM95E/H combo kit includes the AT-VM95E dual moving magnet cartridge premounted on the AT-HS6BK headshell.FeaturesElliptical Bonded Stylus on an Aluminum CantileverDual Moving Magnet DesignDurable Low-Resonance HosingHigh Output Level (4.0mV)VM95 SeriesThis VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.What's in the BoxAT-VM95E/H Headshell & MM Cartridge Combo KitInstallation HardwareSpecificationsFrequency Response: 20-22000 HzChannel Separation: 20 (dB at 1 kHz)Vertical Tracking Angle: 23°Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Bonded round shankRecommended Load Impedance: 47000 ohmsCoil Impedance: 3.3 k ohms (1 kHz)DC Resistance: 485 ohmsCoil Inductance: 550 mH (1 kHz)Output Voltage: 4.0 mV (1 kHz 5 cm/sec.)Output Channel Balance: 2.0 dB (1 kHz)Stylus Shape: 0.3 x 0.7 mil ellipticalCantilever: Aluminum pipeStatic Compliance: 17 x 10 – 6 cm / dyneDynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)Mounting: Half-inchDimensions (Cartridge & Headshell): 0.84" x 0.83" × 2.46"Model: AT-VM95E/HMounting Feature: Half-inch mountRecommended Load Capacitance: 100 to 200 pFReplacement Stylus: AT-VMN95EStylus Size: 0.3 x 0.7 milType: VM Stereo Dual MagnetWeight (Cartridge & Headshell): 15.5 g (0.55 oz)Wire Used for Coil: T.P. Copper
EAN: 4961310157333
Shipping Cost: -1 USD
Availability: in stock
Condition: new
The AT-VM95E/H combo kit includes the AT-VM95E dual moving magnet cartridge premounted on the AT-HS6BK headshell.FeaturesElliptical Bonded Stylus on an Aluminum CantileverDual Moving Magnet DesignDurable Low-Resonance HosingHigh Output Level (4.0mV)VM95 SeriesThis VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.What's in the BoxAT-VM95E/H Headshell & MM Cartridge Combo KitInstallation HardwareSpecificationsFrequency Response: 20-22000 HzChannel Separation: 20 (dB at 1 kHz)Vertical Tracking Angle: 23°Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Bonded round shankRecommended Load Impedance: 47000 ohmsCoil Impedance: 3.3 k ohms (1 kHz)DC Resistance: 485 ohmsCoil Inductance: 550 mH (1 kHz)Output Voltage: 4.0 mV (1 kHz 5 cm/sec.)Output Channel Balance: 2.0 dB (1 kHz)Stylus Shape: 0.3 x 0.7 mil ellipticalCantilever: Aluminum pipeStatic Compliance: 17 x 10 – 6 cm / dyneDynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)Mounting: Half-inchDimensions (Cartridge & Headshell): 0.84" x 0.83" × 2.46"Model: AT-VM95E/HMounting Feature: Half-inch mountRecommended Load Capacitance: 100 to 200 pFReplacement Stylus: AT-VMN95EStylus Size: 0.3 x 0.7 milType: VM Stereo Dual MagnetWeight (Cartridge & Headshell): 15.5 g (0.55 oz)Wire Used for Coil: T.P. Copper
EAN: 4961310157333
Shipping Cost: -1 USD
Availability: in stock
Condition: new
Compare Similar Products
Audio-Technica - AT-VM95E/H Headshell & MM Cartridge Combo Kit - Green
109 USD
The AT-VM95E/H combo kit includes the AT-VM95E dual moving magnet cartridge premounted on the AT-HS6BK headshell.FeaturesElliptical Bonded Stylus on an Aluminum CantileverDual Moving Magnet DesignDurable Low-Resonance HosingHigh Output Level (4.0mV)VM95 SeriesThis VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.What's in the BoxAT-VM95E/H Headshell & MM Cartridge Combo KitInstallation HardwareSpecificationsFrequency Response: 20-22000 HzChannel Separation: 20 (dB at 1 kHz)Vertical Tracking Angle: 23°Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Bonded round shankRecommended Load Impedance: 47000 ohmsCoil Impedance: 3.3 k ohms (1 kHz)DC Resistance: 485 ohmsCoil Inductance: 550 mH (1 kHz)Output Voltage: 4.0 mV (1 kHz 5 cm/sec.)Output Channel Balance: 2.0 dB (1 kHz)Stylus Shape: 0.3 x 0.7 mil ellipticalCantilever: Aluminum pipeStatic Compliance: 17 x 10 – 6 cm / dyneDynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)Mounting: Half-inchDimensions (Cartridge & Headshell): 0.84" x 0.83" × 2.46"Model: AT-VM95E/HMounting Feature: Half-inch mountRecommended Load Capacitance: 100 to 200 pFReplacement Stylus: AT-VMN95EStylus Size: 0.3 x 0.7 milType: VM Stereo Dual MagnetWeight (Cartridge & Headshell): 15.5 g (0.55 oz)Wire Used for Coil: T.P. Copper
Audio-Technica - AT-VM750xSH/H VMx Headshell & Shibata Dual MM Cartridge Combo Kit - Black
429 USD
The AT VM750xSH H combo kit delivers a refined vinyl upgrade with a Shibata dual moving magnet cartridge factory mounted on the AT LT10 universal headshell for fast and accurate installation. Part of the updated VMx series, this cartridge features a solid boron cantilever, precision Shibata stylus, paratoroidal coils, and a center shield plate to enhance channel separation, balance, and transient response while reducing crosstalk. A low resonance polymer body and metal construction preserve musical detail and dynamics. The lightweight aluminum die cast headshell minimizes vibration, allows precise alignment, and uses oxygen free copper leads and a secure finger lift for confident cueing and consistent, high fidelity playback.
Audio-Technica - AT-VM750xSH/H VMx Headshell & Shibata Dual MM Cartridge Combo Kit - Black
429 USD
The AT VM750xSH H combo kit delivers a refined vinyl upgrade with a Shibata dual moving magnet cartridge factory mounted on the AT LT10 universal headshell for fast and accurate installation. Part of the updated VMx series, this cartridge features a solid boron cantilever, precision Shibata stylus, paratoroidal coils, and a center shield plate to enhance channel separation, balance, and transient response while reducing crosstalk. A low resonance polymer body and metal construction preserve musical detail and dynamics. The lightweight aluminum die cast headshell minimizes vibration, allows precise alignment, and uses oxygen free copper leads and a secure finger lift for confident cueing and consistent, high fidelity playback.
Audio-Technica : AT-VM95E Phono Cartridge (w/ Ellipitical Styl...
69 USD
LAB POINTS dual moving magnet cartridge (MM) w/ elliptical stylus very low distortion + excellent channel separation durable low-resonance polyme...
Audio-Technica - AT-VM95C/H Headshell/Cartridge Kit - Blue
89 USD
The AT-VM95C/H combo kit includes the AT-VM95C dual moving magnet cartridge premounted on the AT-HS6BK headshell. VM dual magnet cartridge with 0.6 mil conical stylus. Aluminum cantilever. Specially wound coils increase output voltage. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required. Compatible with any AT-VMN95 replacement stylus. Universal ½"-mount headshell for 4-pin turntable cartridges.
Audio-Technica - AT-VM95C/H Headshell/Cartridge Kit - Blue
89 USD
The AT-VM95C/H combo kit includes the AT-VM95C dual moving magnet cartridge premounted on the AT-HS6BK headshell. VM dual magnet cartridge with 0.6 mil conical stylus. Aluminum cantilever. Specially wound coils increase output voltage. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required. Compatible with any AT-VMN95 replacement stylus. Universal ½"-mount headshell for 4-pin turntable cartridges.
Audio-Technica - Audio Technica AT-VM95SH/H Headshell/Cartridge Kit - Brown
249 USD
The AT-VM95SH/H combo kit includes the AT-VM95SH dual moving magnet cartridge premounted on the AT-HS6BK headshell. VM dual magnet cartridge with 2.7 x 0.26 mil Shibata stylu. Aluminum cantilever. Specially wound coils increase output voltage.. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required. Compatible with any AT-VMN95 replacement stylus. Universal ½"-mount headshell for 4-pin turntable cartridges.
Audio-Technica - Audio Technica AT-VM95SH/H Headshell/Cartridge Kit - Brown
249 USD
The AT-VM95SH/H combo kit includes the AT-VM95SH dual moving magnet cartridge premounted on the AT-HS6BK headshell. VM dual magnet cartridge with 2.7 x 0.26 mil Shibata stylu. Aluminum cantilever. Specially wound coils increase output voltage.. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required. Compatible with any AT-VMN95 replacement stylus. Universal ½"-mount headshell for 4-pin turntable cartridges.
Audio-Technica VM95E
69.99 USD
Audio-Technica Consumer AT-VM95E OverviewThe Audio-Technica Consumer AT-VM95E Dual Moving Magnet Cartridge features a special coil design, which de...
Audio-Technica AT-XP5/H Headshell + Cartridge Combo Kit
119 USD
The AT-XP5/H combo kit includes the AT-XP5 DJ cartridge premounted on the AT-HS6BK headshell.
Audio-Technica VM95E/H
99 USD
Audio-Technica Consumer AT-VM95E Dual Moving Magnet CartridgeThe Audio-Technica Consumer AT-VM95E Dual Moving Magnet Cartridge features a special c...
Audio-Technica - Audio Technica AT-XP3/H Headshell Combo Kit - Blue
95 USD
The AT-XP3/H combo kit includes the AT-XP3 DJ cartridge premounted on the AT-HS6BK headshell. 0.6 mil conical bonded stylus tip. Highly-rigid polyphenylene sulfide (PPS)/glass fiber body. 5.5 mV high-level output. Tracking force of 2.0 to 4.0 grams (3.0 grams standard). Durable carbon fiber-reinforced ABS cantilever and nylon wire suspension ensure precise tracking. Design offers maximum visibility of the stylus tip. Great tracking and channel separation for high-fidelity sound. AT-XP3 cartridge is compatible with any XP or VM95 Series replacement stylus, offering a wide choice of options for every budget and application. Universal ½"-mount headshell for 4-pin turntable cartridges.
Audio-Technica - Audio Technica AT-XP3/H Headshell Combo Kit - Blue
95 USD
The AT-XP3/H combo kit includes the AT-XP3 DJ cartridge premounted on the AT-HS6BK headshell. 0.6 mil conical bonded stylus tip. Highly-rigid polyphenylene sulfide (PPS)/glass fiber body. 5.5 mV high-level output. Tracking force of 2.0 to 4.0 grams (3.0 grams standard). Durable carbon fiber-reinforced ABS cantilever and nylon wire suspension ensure precise tracking. Design offers maximum visibility of the stylus tip. Great tracking and channel separation for high-fidelity sound. AT-XP3 cartridge is compatible with any XP or VM95 Series replacement stylus, offering a wide choice of options for every budget and application. Universal ½"-mount headshell for 4-pin turntable cartridges.
Audio-Technica - Audio Technica AT-XP5/H Headshell Combo Kit - Red
119 USD
The AT-XP5/H combo kit includes the AT-XP5 DJ cartridge premounted on the AT-HS6BK headshell. 0.3 x 0.7 mil elliptical bonded stylus tip. Highly rigid, lightweight polyphenylene sulfide (PPS)/glass fiber body. 5.5 mV high-level output. Tracking force of 2.0 to 4.0 grams (3.0 grams standard). Durable carbon fiber-reinforced ABS cantilever and nylon wire suspension ensure precise tracking. Design offers maximum visibility of the stylus tip. Great tracking and channel separation for high-fidelity sound. Universal ½"-mount headshell for 4-pin turntable cartridges.
Audio-Technica Consumer AT-VMN95E Replacement Stylus
54 USD
The Audio-Technica Consumer AT-VMN95E is a replacement stylus for the AT-VM95E dual moving magnet cartridge. The Bonded Round shank features an alu...
Audio-Technica Audio-Technica VM520EB/H Headshell/Cartridge Co...
169 USD
For over 50 years Audio-Technica has worked alongside leading figures in broadcasting and music to develop and hone a wide range of products with t...
Audio-Technica : AT-XP7/H DJ Mounted Cartridge Headshell / Car...
179 USD
LAB POINTS dual moving magnet cartridge (MM) specifically designed for DJs comes pre-mounted on Audio-Technica AT-HS6BK headshell highest level ...
Audio-Technica Audio Technica AT-XP7/H Headshell/Cartridge Com...
179 USD
The AT-XP7/H combo kit includes the AT-XP7 DJ cartridge premounted on the AT-HS6BK headshell.
Audio-Technica - Audio Technica AT-VM95SP/H Headshell/Cartridge Kit - Gray
119 USD
The AT-VM95SP/H combo kit includes the AT-VM95SP dual moving magnet cartridge premounted on the AT-HS6BK headshell. VM dual magnet cartridge with 3.0 mil conical stylus. Aluminum cantilever. Specially wound coils increase output voltage. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required. Compatible with any AT-VMN95 replacement stylus. Universal ½"-mount headshell for 4-pin turntable cartridges.
Audio-Technica - Audio Technica AT-VM95SP/H Headshell/Cartridge Kit - Gray
119 USD
The AT-VM95SP/H combo kit includes the AT-VM95SP dual moving magnet cartridge premounted on the AT-HS6BK headshell. VM dual magnet cartridge with 3.0 mil conical stylus. Aluminum cantilever. Specially wound coils increase output voltage. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required. Compatible with any AT-VMN95 replacement stylus. Universal ½"-mount headshell for 4-pin turntable cartridges.
Audio-Technica - Audio Technica AT-VM95SP/H Headshell/Cartridge Kit - Gray
119 USD
The AT-VM95SP/H combo kit includes the AT-VM95SP dual moving magnet cartridge premounted on the AT-HS6BK headshell. VM dual magnet cartridge with 3.0 mil conical stylus. Aluminum cantilever. Specially wound coils increase output voltage. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required. Compatible with any AT-VMN95 replacement stylus. Universal ½"-mount headshell for 4-pin turntable cartridges.
Audio-Technica - Audio Technica AT-XP3/H Headshell Combo Kit - Blue
95 USD
The AT-XP3/H combo kit includes the AT-XP3 DJ cartridge premounted on the AT-HS6BK headshell. 0.6 mil conical bonded stylus tip. Highly-rigid polyphenylene sulfide (PPS)/glass fiber body. 5.5 mV high-level output. Tracking force of 2.0 to 4.0 grams (3.0 grams standard). Durable carbon fiber-reinforced ABS cantilever and nylon wire suspension ensure precise tracking. Design offers maximum visibility of the stylus tip. Great tracking and channel separation for high-fidelity sound. AT-XP3 cartridge is compatible with any XP or VM95 Series replacement stylus, offering a wide choice of options for every budget and application. Universal ½"-mount headshell for 4-pin turntable cartridges.
Audio-Technica Cartridge w/stylus + Generic headshell
90 USD
Great stylus and cartridge with a generic headshell
Audio-Technica - AT-LP7X Manual Belt Drive Turntable with AT-VM95E MM Cartridge - Black
999 USD
The AT-LP7X is a fully manual belt-drive turntable designed for listeners who value refined analog sound, precision engineering, and understated style. Its dense 40 mm MDF plinth and 20 mm acrylic platter work together to suppress resonance and vibration, delivering exceptionally quiet, detailed playback. A speed-sensor system maintains accurate 33-1/3 and 45 RPM rotation, while the stainless-steel spindle and low-friction bearing ensure smooth, consistent performance. The J-shaped tonearm features adjustable VTA and anti-skate for excellent tracking and flexible setup options, and it comes pre-mounted with the trusted AT-VM95E cartridge on an AT-LT10 headshell. A built-in MM/MC phono preamp allows easy integration with a wide range of audio systems, while expansive cartridge compatibility invites future upgrades and customization.
Audio-Technica : AT-VM95C Phono Cartridge (w/ Conical Stylus) ...
49 USD
LAB POINTS dual moving magnet cartridge (MM) w/ conical stylus very low distortion + excellent channel separation durable low-resonance polymer ...
Audio-Technica - AT-LP7X Manual Belt Drive Turntable with AT-VM95E MM Cartridge - Black
999 USD
The AT-LP7X is a fully manual belt-drive turntable designed for listeners who value refined analog sound, precision engineering, and understated style. Its dense 40 mm MDF plinth and 20 mm acrylic platter work together to suppress resonance and vibration, delivering exceptionally quiet, detailed playback. A speed-sensor system maintains accurate 33-1/3 and 45 RPM rotation, while the stainless-steel spindle and low-friction bearing ensure smooth, consistent performance. The J-shaped tonearm features adjustable VTA and anti-skate for excellent tracking and flexible setup options, and it comes pre-mounted with the trusted AT-VM95E cartridge on an AT-LT10 headshell. A built-in MM/MC phono preamp allows easy integration with a wide range of audio systems, while expansive cartridge compatibility invites future upgrades and customization.
Audio-Technica - AT-LP7X Manual Belt Drive Turntable with AT-VM95E MM Cartridge - Black
999 USD
The AT-LP7X is a fully manual belt-drive turntable designed for listeners who value refined analog sound, precision engineering, and understated style. Its dense 40 mm MDF plinth and 20 mm acrylic platter work together to suppress resonance and vibration, delivering exceptionally quiet, detailed playback. A speed-sensor system maintains accurate 33-1/3 and 45 RPM rotation, while the stainless-steel spindle and low-friction bearing ensure smooth, consistent performance. The J-shaped tonearm features adjustable VTA and anti-skate for excellent tracking and flexible setup options, and it comes pre-mounted with the trusted AT-VM95E cartridge on an AT-LT10 headshell. A built-in MM/MC phono preamp allows easy integration with a wide range of audio systems, while expansive cartridge compatibility invites future upgrades and customization.
Audio-Technica - AT-LP7X Manual Belt Drive Turntable with AT-VM95E MM Cartridge - Black
999 USD
The AT-LP7X is a fully manual belt-drive turntable designed for listeners who value refined analog sound, precision engineering, and understated style. Its dense 40 mm MDF plinth and 20 mm acrylic platter work together to suppress resonance and vibration, delivering exceptionally quiet, detailed playback. A speed-sensor system maintains accurate 33-1/3 and 45 RPM rotation, while the stainless-steel spindle and low-friction bearing ensure smooth, consistent performance. The J-shaped tonearm features adjustable VTA and anti-skate for excellent tracking and flexible setup options, and it comes pre-mounted with the trusted AT-VM95E cartridge on an AT-LT10 headshell. A built-in MM/MC phono preamp allows easy integration with a wide range of audio systems, while expansive cartridge compatibility invites future upgrades and customization.
Audio-Technica - AT-LP7X Manual Belt Drive Turntable with AT-VM95E MM Cartridge - Black
999 USD
The AT-LP7X is a fully manual belt-drive turntable designed for listeners who value refined analog sound, precision engineering, and understated style. Its dense 40 mm MDF plinth and 20 mm acrylic platter work together to suppress resonance and vibration, delivering exceptionally quiet, detailed playback. A speed-sensor system maintains accurate 33-1/3 and 45 RPM rotation, while the stainless-steel spindle and low-friction bearing ensure smooth, consistent performance. The J-shaped tonearm features adjustable VTA and anti-skate for excellent tracking and flexible setup options, and it comes pre-mounted with the trusted AT-VM95E cartridge on an AT-LT10 headshell. A built-in MM/MC phono preamp allows easy integration with a wide range of audio systems, while expansive cartridge compatibility invites future upgrades and customization.
Audio-Technica : VM540ML Microline MM Cartridge - Cartridge
279 USD
LAB POINTS dual magnet audiophile cartridge w/ microline stylus top of the line in Audio-Technica's 500 series outstanding channel separation + ...
Audio-Technica - AT-VM95E Dual Moving Magnet Cartridge - Green
74 USD
This Audio-Technica Dual Moving Magnet Turntable Cartridge, Green with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge is special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Audio-Technica - AT-VM95E Dual Moving Magnet Cartridge - Green
74 USD
This Audio-Technica Dual Moving Magnet Turntable Cartridge, Green with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge is special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Audio-Technica - AT-VM95E Dual Moving Magnet Cartridge - Green
74 USD
This Audio-Technica Dual Moving Magnet Turntable Cartridge, Green with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge is special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Audio-Technica - AT-VM95E Dual Moving Magnet Cartridge - Green
74 USD
This Audio-Technica Dual Moving Magnet Turntable Cartridge, Green with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge is special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Audio-Technica - AT-VM95E Dual Moving Magnet Cartridge - Green
74 USD
This Audio-Technica Dual Moving Magnet Turntable Cartridge, Green with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge is special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Audio-Technica - AT-LH11H Aluminum Headshell - Black
109 USD
The AT LH11H is a universal half inch mount aluminum headshell designed for listeners who want maximum compatibility without added mass. Weighing just 11 grams the lightest option in the LH lineup it works easily with a wider range of cartridges turntables and tonearms. Non threaded through holes make mounting simple when using cartridges with threaded bodies while the rigid aluminum construction with hard anodized finish helps control resonance and reduce unwanted vibration. High purity oxygen free copper lead wires ensure clean signal transfer and consistent performance. An adjustable cylinder allows precise azimuth and overhang alignment for accurate tracking and improved sound. Installation hardware is included for convenience. Additional LH series weight options are available to fine tune cartridge and tonearm matching.
Audio-Technica - Audio Technica AT-XP5/H Headshell Combo Kit - Red
119 USD
The AT-XP5/H combo kit includes the AT-XP5 DJ cartridge premounted on the AT-HS6BK headshell. 0.3 x 0.7 mil elliptical bonded stylus tip. Highly rigid, lightweight polyphenylene sulfide (PPS)/glass fiber body. 5.5 mV high-level output. Tracking force of 2.0 to 4.0 grams (3.0 grams standard). Durable carbon fiber-reinforced ABS cantilever and nylon wire suspension ensure precise tracking. Design offers maximum visibility of the stylus tip. Great tracking and channel separation for high-fidelity sound. Universal ½"-mount headshell for 4-pin turntable cartridges.
Audio-Technica - AT-VM750xSH VMx Shibata MM Phono Cartridge - Gold
369 USD
The AT-VMx series elevates premium dual moving magnet cartridge design with added warmth, precision, and realism for engaging vinyl playback. Dual magnets aligned to the stereo groove mirror the cutting head geometry, delivering accurate tracking, wide frequency response, and strong channel separation. Advanced paratoroidal coils with high-purity copper wire, fewer turns, and a center shield plate reduce crosstalk and sharpen transients for a clean, stable stereo image. The AT-VM750xSH adds a lightweight Shibata stylus and solid boron cantilever for greater groove contact, lower distortion, and faster signal transmission, capturing delicate detail and dynamic impact. Easy-mount threaded inserts, a V-cut stylus guard, interchangeable styli, and a low-resonance metal body make this cartridge refined, versatile, and simple to install.
Audio-Technica - AT-VM750xSH VMx Shibata MM Phono Cartridge - Gold
369 USD
The AT-VMx series elevates premium dual moving magnet cartridge design with added warmth, precision, and realism for engaging vinyl playback. Dual magnets aligned to the stereo groove mirror the cutting head geometry, delivering accurate tracking, wide frequency response, and strong channel separation. Advanced paratoroidal coils with high-purity copper wire, fewer turns, and a center shield plate reduce crosstalk and sharpen transients for a clean, stable stereo image. The AT-VM750xSH adds a lightweight Shibata stylus and solid boron cantilever for greater groove contact, lower distortion, and faster signal transmission, capturing delicate detail and dynamic impact. Easy-mount threaded inserts, a V-cut stylus guard, interchangeable styli, and a low-resonance metal body make this cartridge refined, versatile, and simple to install.