Home > best products sharkbite
sharkbite: best products
![SharkBite Push to Connect 3/4 in. PTC each X 3/4 in. D Brass Slip Coupling]()
SharkBite Push to Connect 3/4 in. PTC each X 3/4 in. D Brass Slip Coupling
24.99 USD
The SharkBite Slip Coupling is a plumbing repair fitting that allows you to make quick, easy repairs to Copper or CPVC pipe. This fitting allows up to 2 inch of damaged pipe to be removed and repaired. When making a repair, simply cut out a section of pipe no greater than 2 inch and connect the slip end of the fitting onto one side. Then, take the Disconnect Clip and slide the slip end of the fitting along the pipe to connect the other pipe. The slip coupling is particularly useful for burst or frozen pipes.
![SharkBite EvoPEX 3/4 in. Push X 3/4 in. D Push Plastic Elbow]()
SharkBite EvoPEX 3/4 in. Push X 3/4 in. D Push Plastic Elbow
41.99 USD
SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX pipe as a holistic system. SharkBite EvoPEX fittings shall be installed on SharkBite PEX complying with ASTM F876 or CSA B137.5. The fittings shall be made of Engineered Polymer and be compliant with ASSE 1061 or CSA B125.3. The fittings shall be used in a potable water or radian.
![SharkBite EvoPEX 1/2 in. Push X 1/2 in. D FNPT Adapter]()
SharkBite EvoPEX 1/2 in. Push X 1/2 in. D FNPT Adapter
31.99 USD
SharkBite EvoPEX System is the first PEX ONLY push-to-connect rough-in plumbing solution designed to use without the need for additional tools and rings. It is engineered to improve efficiency and enable plumbing contractors to optimize install time with clean, leak-free installations unlike traditional crimp and expansion methods. Like traditional SharkBite Fittings, no special tools, soldering, glue or crimping to plumb an entire home, optimizing install time and efficiency. The systems ease of installation reduces the risk of install errors and potential leaks, just push onto PEX Pipe and check the green visual indicator to ensure a proper, leak-free connection. Its that simple. SharkBite EvoPEX Fittings are made from Acudel Plastic it provides toughness and chemical resistance along with excellent anti-decay stability and dimensional stability.
![SharkBite EvoPEX 3/4 in. Push X 3/4 in. D Push Brass Ball Valve]()
SharkBite EvoPEX 3/4 in. Push X 3/4 in. D Push Brass Ball Valve
21.99 USD
SharkBite EvoPEX System is the first PEX ONLY push-to-connect rough-in plumbing solution designed to use without the need for additional tools and rings. It is engineered to improve efficiency and enable plumbing contractors to optimize install time with clean, leak-free installations unlike traditional crimp and expansion methods. Like traditional SharkBite Fittings, no special tools, soldering, glue or crimping to plumb an entire home, optimizing install time and efficiency. The systems ease of installation reduces the risk of install errors and potential leaks, just push onto PEX Pipe and check the green visual indicator to ensure a proper, leak-free connection. Its that simple. SharkBite EvoPEX Fittings are made from Acudel Plastic it provides toughness and chemical resistance along with excellent anti-decay stability and dimensional stability.
![SharkBite 1/2 in. Compression X 3/8 in. Compression Brass Angle Stop Valve]()
SharkBite 1/2 in. Compression X 3/8 in. Compression Brass Angle Stop Valve
44.99 USD
SharkBite 1/2 in. X 3/8 in. Compression Angle Stop ValveWe use high-quality DZR Lead-Free Brass for our 1/2 in. x 3/8 in. Quarter Turn Angle Stop Ball Valve. Used where a water pipe enters a room allowing easy water shut off for maintenance, repair, installing a toilet pipe valve or faucet to your water system with no need to turn off your main supply valve. Our product works with your existing plumbing, is easy to disassemble for changing fittings and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
![SharkBite 3/4 in. Push Fit X 3/4 in. D FIP 24 in. Stainless Steel Supply Line]()
SharkBite 3/4 in. Push Fit X 3/4 in. D FIP 24 in. Stainless Steel Supply Line
38.99 USD
The SharkBite 24 inch x 3/4 inch push-fit x 3/4 inch FIP corrugated stainless steel water heater connector is the fastest way to connect your water heater to your plumbing system. Apply thread tape to the pipe nipple on the water heater thread the 3/4 inch FIP Swivel nut onto the water heater and tightens with wrench and connects the 3/4 inch SharkBite end to Copper, PEX or CPVC pipe. No solder or additional fittings are needed when using the SharkBite connection system.
![SharkBite 3/4 in. Bronze Pressure Regulating Valve 1 pc]()
SharkBite 3/4 in. Bronze Pressure Regulating Valve 1 pc
99.99 USD
The Cash Acme SharkBite EB-45DSB is a half-cartridge-based pressure reducing and regulating valve with a bronze body. The valve resembles the traditional regulators with a spring chamber and an adjusting screw but offers the performance of a cartridge-based valve. The SharkBite EB-45DSB is assembled using modular construction methods and features SharkBite connections in 1/2 in. through 1 in. sizes. Connect the SharkBite pressure reducing and regulating valve to copper tubing, and CTS CPVC and PEX in seconds with ease. These valves are supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 10-70 psi without changing the spring. The EB-45 is intended for use where supply line pressure does not exceed 200 psi. This regulator is suited for either cold or hot (to 180°F) water service.
![SharkBite 3/4 in. MPT X 3/4 in. Copper Washing Machine Valve]()
SharkBite 3/4 in. MPT X 3/4 in. Copper Washing Machine Valve
38.99 USD
Single-lever control of both hot and cold water to protect a washing machine’s hose and inner working parts. E-Z On/Off ball-type design can also be used to throttle water flow and ease the water hammer shock caused by solenoid valves. Bronze construction. Equipped with fluoro-polymer seats against brass thru-hole balls that provide quiet rotating action. The WM-1 is supplied with male adapters. The WM-2 is furnished with sweat copper elbow adapters (2-3/8 inch on centers) which may be installed either up or down.
![SharkBite EvoPEX 3/4 in. Push X 3/4 in. D MPT Plastic Adapter]()
SharkBite EvoPEX 3/4 in. Push X 3/4 in. D MPT Plastic Adapter
39.99 USD
SharkBite EvoPEX System is the first PEX ONLY push-to-connect rough-in plumbing solution designed to use without the need for additional tools and rings. It is engineered to improve efficiency and enable plumbing contractors to optimize install time with clean, leak-free installations unlike traditional crimp and expansion methods. Like traditional SharkBite Fittings, no special tools, soldering, glue or crimping to plumb an entire home, optimizing install time and efficiency. The systems ease of installation reduces the risk of install errors and potential leaks, just push onto PEX Pipe and check the green visual indicator to ensure a proper, leak-free connection. Its that simple. SharkBite EvoPEX Fittings are made from Acudel Plastic it provides toughness and chemical resistance along with excellent anti-decay stability and dimensional stability.
![SharkBite EvoPEX 3/4 in. Push X 3/4 in. D FPT Plastic Female Adapter]()
SharkBite EvoPEX 3/4 in. Push X 3/4 in. D FPT Plastic Female Adapter
35.99 USD
EvoPEX is a push-to-connect PEX fitting designed for faster installation compared to traditional PEX rough-in plumbing methods. Requires no special tools, crimp, clamp, PEX rings, increasing productivity. Securely and permanently connect two pieces of PEX pipe together. Can be rotated after connected, and is ideal for working in tight spaces. Green visual indicator lets you know when PEX tubing is inserted to the proper depth
![SharkBite Push to Connect 1 in. PTC each X 1 in. D PTC Brass Elbow]()
SharkBite Push to Connect 1 in. PTC each X 1 in. D PTC Brass Elbow
25.99 USD
The SharkBite Max 90-degree elbow offers an innovative push-to-connect design for quick and easy installation when connecting two pieces of potable water pipe. Ideal for working in tight spaces, the 90-degree brass push-to-connect elbow can be installed in wet lines with no special tools, crimping, soldering or glue required. Faster install time and ease of use reduces installation errors.
![SharkBite 3/4 in. PEX X 3/4 in. D PEX Brass Elbow]()
SharkBite 3/4 in. PEX X 3/4 in. D PEX Brass Elbow
54.99 USD
The SharkBite PEX Barb Fitting is an easy to install, low cost solution to connect PEX Tubing. SharkBite PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These PEX fittings may be used with the stainless steel clamping system or the copper crimp ring system both sold separately. The SharkBite PEX Barb fitting range offers a wide variety of Fittings, Manifolds, Valves, clamp rings, crimp rings and tools in various sizes to help complete your next plumbing project.
![SharkBite 3/4 in. PEX Grade X 3/4 in. D MNPT Grade Brass Male Adapter]()
SharkBite 3/4 in. PEX Grade X 3/4 in. D MNPT Grade Brass Male Adapter
39.99 USD
Innovative push-to-connect design makes for quick and easy installation. Connect two pieces of PEX, copper, CPVC, PE-RT and/or HDPE pipe in any combination. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors. The SharkBite Connection System makes any plumbing project fast and easy thanks to unique push-to-connect technology. When you insert a pipe into a SharkBite quick-connect fitting, the fitting's stainless-steel teeth bite down and grip the pipe, while its special O-ring compresses to create a watertight seal.
![SharkBite Push to Connect 1 in. IPS in. X 1 in. D IPS Brass Connector]()
SharkBite Push to Connect 1 in. IPS in. X 1 in. D IPS Brass Connector
26.99 USD
The SharkBite 1 in. Push-to-Connect PVC (Iron Pipe Size) x 1 in. Male Pipe Thread Adapter is the easiest way to transition from Female Pipe Thread into Iron Pipe Size PVC Pipe. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. The white collar side fits Sch. 40, 80, 120 PVC and also can be used on IPS CPVC Sch. 40 and Sch. 80 pipes. The male threaded end will fit any FNPT (Female National Pipe Thread) connection. Disassembly is just as fast using the SharkBite disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces.
![SharkBite EvoPEX 1/2 in. Push X 1/2 in. D Push Plastic Elbow]()
SharkBite EvoPEX 1/2 in. Push X 1/2 in. D Push Plastic Elbow
34.99 USD
SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX pipe as a holistic system. SharkBite EvoPEX fittings shall be installed on SharkBite PEX complying with ASTM F876 or CSA B137.5. The fittings shall be made of Engineered Polymer and be compliant with ASSE 1061 or CSA B125.3. The fittings shall be used in a potable water or radian.
![SharkBite 3/4 in. D X 50 ft. L Polyethylene Tubing 160 psi]()
SharkBite 3/4 in. D X 50 ft. L Polyethylene Tubing 160 psi
34.99 USD
SharkBite PEX is a cross-linked polyethylene tubing best suited for potable water supply application. PEX Pipe is durable, flexible and corrosion resistant. SharkBite PEX features a repeating SharkBite imprint pattern that provides a visual aid to help you determine whether the tube has been fully inserted when using the SharkBite push-fit fitting range. In addition to Potable Water Supply SharkBite PEX meets UL Standard for Plastic Piping in Fire Systems. Strong, flexible, corrosion-resistant pipe Flexibility reduces number of fittings needed to complete a job; reducing cost and leak points Can be installed wet or dry for immediate pressure testing SharkBite imprint pattern provides a visual aid to ensure pipe is fully inserted when using SharkBite push-to-connect fittings SharkBite system provides a variety of connection options, SharkBite PEX can be connected with SharkBite push-to-connect fittings or barbed fittings Listed to NSF 14 and CSA B137.5 for use in potable water systems Meets UL1821 standard for plastic piping for fire systems (3/4 in. and 1 in. only) Manufactured and tested to meet or exceed the requirements of the ASTM F-876/877/2023 and CSA B137.5
![SharkBite EvoPEX 3/4 in. Barb X 3/4 in. D Push Plastic Coupling]()
SharkBite EvoPEX 3/4 in. Barb X 3/4 in. D Push Plastic Coupling
31.99 USD
SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX pipe as a holistic system. SharkBite EvoPEX fittings shall be installed on SharkBite PEX complying with ASTM F876 or CSA B137.5. The fittings shall be made of Engineered Polymer and be compliant with ASSE 1061 or CSA B125.3. The fittings shall be used in a potable water or radian.
![SharkBite 3/4 in. PEX X 3/4 in. D PEX Tee]()
SharkBite 3/4 in. PEX X 3/4 in. D PEX Tee
54.99 USD
The SharkBite barb connection system is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with DZR brass, the SharkBite barb fittings & valves are corrosion resistant.
![SharkBite Push to Connect 1 in. PVC X 1 in. D PVC Brass Slip Tee]()
SharkBite Push to Connect 1 in. PVC X 1 in. D PVC Brass Slip Tee
35.99 USD
The Shark Bite PVC Transition Slip Tee allows you to add a line into your existing plumbing system while converting from Copper (CTS) pipe to PVC pipe. The slip feature allows you to cut into an existing Copper or CPVC pipe and run out PVC Schedule 40, 80 or 120 from the Tee. The white collar center connection fits Schedule 40, 80, 120 PVC and also can be used on IPS CPVC Schedule 40 and 80 pipes. The tan collar ends fit CTS Copper, PEX, CPVC or PE-RT pipe. Simply insert the slip coupling onto the pipe and using the PVC depth gauge and disconnect clip to slip the fitting back onto the other end of pipe completing the connection.
![SharkBite Push to Connect 3/4 in. PTC X 3/4 in. D PTC Brass Tank Tee]()
SharkBite Push to Connect 3/4 in. PTC X 3/4 in. D PTC Brass Tank Tee
25.99 USD
The SharkBite 3/4 inch Push-to-Connect x 3/4 inch Push-to-Connect x 3/4 inch female NPT Slip Tee is used to connect copper and CPVC pipes. The Slip tee allows for the fitting to be inserted onto the pipe and then using the disconnect tool slipped back onto the other end of the pipe. This allows for up to a 2 inch section of the pipe to be removed and then repaired without having to add additional pipe. This slip tee is perfect for removing a section of pipe and adding in an expansion tank for your water heater, the FNPT Tee is threaded so you can screw in the expansion tank after installing the tee to the line.
![SharkBite Push to Connect 1 in. PTC each X 1 in. D PTC each Brass Slip Coupling]()
SharkBite Push to Connect 1 in. PTC each X 1 in. D PTC each Brass Slip Coupling
29.99 USD
SharkBite Max slip couplings are ideal for making quick repairs on pipe, the slip end is only compatible with copper. Using a single fitting, you can remove up to two inches of damaged pipe to make a repair, with the need for additional pipe or fittings. Max slip couplings are ideal for working in tight spaces and can be leveraged wherever repairs are needed.
![SharkBite 1/2 in. Compression X 3/8 in. Compression Brass Dual Shut-Off Valve]()
SharkBite 1/2 in. Compression X 3/8 in. Compression Brass Dual Shut-Off Valve
35.99 USD
Used to control and shut off water flow to fixtures or appliances for maintenance and repair. Innovative design with 1/2 in. push-to-connect inlet makes for quick installation and quarter-turn, full-port brass ball valve makes for easy operation. Faster install time and ease of use reduces installation errors. Compatible with PEX, copper, CPVC and PE-RT SDR-9 HDPE pipe.
![SharkBite EvoPEX 3/4 in. Push X 1/2 in. D Push Plastic Reducing Coupling]()
SharkBite EvoPEX 3/4 in. Push X 1/2 in. D Push Plastic Reducing Coupling
31.99 USD
SharkBite EvoPEX System is the first PEX ONLY push-to-connect rough-in plumbing solution designed to use without the need for additional tools and rings. It is engineered to improve efficiency and enable plumbing contractors to optimize install time with clean, leak-free installations unlike traditional crimp and expansion methods. Like traditional SharkBite Fittings, no special tools, soldering, glue or crimping to plumb an entire home, optimizing install time and efficiency. The systems ease of installation reduces the risk of install errors and potential leaks, just push onto PEX Pipe and check the green visual indicator to ensure a proper, leak-free connection. Its that simple. SharkBite EvoPEX Fittings are made from Acudel Plastic it provides toughness and chemical resistance along with excellent anti-decay stability and dimensional stability.
![SharkBite 3/4 in. Male each X 3/4 in. D Male Brass Tee]()
SharkBite 3/4 in. Male each X 3/4 in. D Male Brass Tee
59.99 USD
The SharkBite PEX/Barb Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
![SharkBite EvoPEX 1/2 in. Barb X 1/2 in. D Push Plastic Coupling]()
SharkBite EvoPEX 1/2 in. Barb X 1/2 in. D Push Plastic Coupling
25.99 USD
SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX pipe as a holistic system. SharkBite EvoPEX fittings shall be installed on SharkBite PEX complying with ASTM F876 or CSA B137.5. The fittings shall be made of Engineered Polymer and be compliant with ASSE 1061 or CSA B125.3. The fittings shall be used in a potable water or radian.SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX pipe as a holistic system. SharkBite EvoPEX fittings shall be installed on SharkBite PEX complying with ASTM F876 or CSA B137.5. The fittings shall be made of Engineered Polymer and be compliant with ASSE 1061 or CSA B125.3. The fittings shall be used in a potable water or radian.
ANGEL Sharkbite Hem Jumper black XSmall female
72.95 USD
Throw it on and go!fabric & care Delicate hand wash or dry cleanoverview Imported ANGEL jumper Hits at ankles
SharkBite Push to Connect 3/4 in. PTC each X 3/4 in. D Brass Slip Coupling
24.99 USD
The SharkBite Slip Coupling is a plumbing repair fitting that allows you to make quick, easy repairs to Copper or CPVC pipe. This fitting allows up to 2 inch of damaged pipe to be removed and repaired. When making a repair, simply cut out a section of pipe no greater than 2 inch and connect the slip end of the fitting onto one side. Then, take the Disconnect Clip and slide the slip end of the fitting along the pipe to connect the other pipe. The slip coupling is particularly useful for burst or frozen pipes.
SharkBite QuickStand Metal Electric or Gas Water Heater Stand 16 in. H X 21-1/2 in. L X 21-1/2 in. W
59.99 USD
"16"" metal water heater stand for gas or electric water heaters. Complies with National fuel gas code Z233.1 1980 section 51.9 for installation in residential garages."
SharkBite EvoPEX 3/4 in. Push X 3/4 in. D Push Plastic Elbow
41.99 USD
SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX pipe as a holistic system. SharkBite EvoPEX fittings shall be installed on SharkBite PEX complying with ASTM F876 or CSA B137.5. The fittings shall be made of Engineered Polymer and be compliant with ASSE 1061 or CSA B125.3. The fittings shall be used in a potable water or radian.
SharkBite EvoPEX 1/2 in. Push X 1/2 in. D FNPT Adapter
31.99 USD
SharkBite EvoPEX System is the first PEX ONLY push-to-connect rough-in plumbing solution designed to use without the need for additional tools and rings. It is engineered to improve efficiency and enable plumbing contractors to optimize install time with clean, leak-free installations unlike traditional crimp and expansion methods. Like traditional SharkBite Fittings, no special tools, soldering, glue or crimping to plumb an entire home, optimizing install time and efficiency. The systems ease of installation reduces the risk of install errors and potential leaks, just push onto PEX Pipe and check the green visual indicator to ensure a proper, leak-free connection. Its that simple. SharkBite EvoPEX Fittings are made from Acudel Plastic it provides toughness and chemical resistance along with excellent anti-decay stability and dimensional stability.
SharkBite EvoPEX 3/4 in. Push X 3/4 in. D Push Brass Ball Valve
21.99 USD
SharkBite EvoPEX System is the first PEX ONLY push-to-connect rough-in plumbing solution designed to use without the need for additional tools and rings. It is engineered to improve efficiency and enable plumbing contractors to optimize install time with clean, leak-free installations unlike traditional crimp and expansion methods. Like traditional SharkBite Fittings, no special tools, soldering, glue or crimping to plumb an entire home, optimizing install time and efficiency. The systems ease of installation reduces the risk of install errors and potential leaks, just push onto PEX Pipe and check the green visual indicator to ensure a proper, leak-free connection. Its that simple. SharkBite EvoPEX Fittings are made from Acudel Plastic it provides toughness and chemical resistance along with excellent anti-decay stability and dimensional stability.
SharkBite 1/2 in. Compression X 3/8 in. Compression Brass Angle Stop Valve
44.99 USD
SharkBite 1/2 in. X 3/8 in. Compression Angle Stop ValveWe use high-quality DZR Lead-Free Brass for our 1/2 in. x 3/8 in. Quarter Turn Angle Stop Ball Valve. Used where a water pipe enters a room allowing easy water shut off for maintenance, repair, installing a toilet pipe valve or faucet to your water system with no need to turn off your main supply valve. Our product works with your existing plumbing, is easy to disassemble for changing fittings and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
SharkBite NCLX-5LX 3/4 in. Brass Temperature and Pressure Relief Valve
36.99 USD
The NCLX-5LX provides temperature and pressure protection for residential water heaters and storage tanks. Install a copper or CPVC drain line quickly and efficiently with the SharkBite fitting on the outlet of the valve.
SharkBite 1/2 in. D X 1/2 in. D Brass Spring Loaded Check Valve
24.99 USD
SharkBite Check Valves are general purpose, spring-loaded check valves that are easily installed on Copper, CPVC, PEX and PE-RT lines. These valves can be installed horizontally or vertically and prevents the reverse flow of water through the water supply line.
SharkBite 3/4 in. D X 3/4 in. D Brass Spring Loaded Check Valve
28.99 USD
SharkBite Check Valves are general purpose, spring-loaded check valves that are easily installed on Copper, CPVC, PEX and PE-RT lines. These valves can be installed horizontally or vertically and prevents the reverse flow of water through the water supply line.
SharkBite 3/4 in. Push Fit X 3/4 in. D FIP 24 in. Stainless Steel Supply Line
38.99 USD
The SharkBite 24 inch x 3/4 inch push-fit x 3/4 inch FIP corrugated stainless steel water heater connector is the fastest way to connect your water heater to your plumbing system. Apply thread tape to the pipe nipple on the water heater thread the 3/4 inch FIP Swivel nut onto the water heater and tightens with wrench and connects the 3/4 inch SharkBite end to Copper, PEX or CPVC pipe. No solder or additional fittings are needed when using the SharkBite connection system.
SharkBite 3/4 in. Bronze Pressure Regulating Valve 1 pc
99.99 USD
The Cash Acme SharkBite EB-45DSB is a half-cartridge-based pressure reducing and regulating valve with a bronze body. The valve resembles the traditional regulators with a spring chamber and an adjusting screw but offers the performance of a cartridge-based valve. The SharkBite EB-45DSB is assembled using modular construction methods and features SharkBite connections in 1/2 in. through 1 in. sizes. Connect the SharkBite pressure reducing and regulating valve to copper tubing, and CTS CPVC and PEX in seconds with ease. These valves are supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 10-70 psi without changing the spring. The EB-45 is intended for use where supply line pressure does not exceed 200 psi. This regulator is suited for either cold or hot (to 180°F) water service.
SharkBite 3/4 in. MPT X 3/4 in. Copper Washing Machine Valve
38.99 USD
Single-lever control of both hot and cold water to protect a washing machine’s hose and inner working parts. E-Z On/Off ball-type design can also be used to throttle water flow and ease the water hammer shock caused by solenoid valves. Bronze construction. Equipped with fluoro-polymer seats against brass thru-hole balls that provide quiet rotating action. The WM-1 is supplied with male adapters. The WM-2 is furnished with sweat copper elbow adapters (2-3/8 inch on centers) which may be installed either up or down.
SharkBite 3/4 in. PEX x 3/4 in. Dia. PEX Brass Coupling 25 pk
41.99 USD
The SharkBite PEX Barb Threaded Female Adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing.
SharkBite EvoPEX 3/4 in. Push X 3/4 in. D MPT Plastic Adapter
39.99 USD
SharkBite EvoPEX System is the first PEX ONLY push-to-connect rough-in plumbing solution designed to use without the need for additional tools and rings. It is engineered to improve efficiency and enable plumbing contractors to optimize install time with clean, leak-free installations unlike traditional crimp and expansion methods. Like traditional SharkBite Fittings, no special tools, soldering, glue or crimping to plumb an entire home, optimizing install time and efficiency. The systems ease of installation reduces the risk of install errors and potential leaks, just push onto PEX Pipe and check the green visual indicator to ensure a proper, leak-free connection. Its that simple. SharkBite EvoPEX Fittings are made from Acudel Plastic it provides toughness and chemical resistance along with excellent anti-decay stability and dimensional stability.
SharkBite EvoPEX 3/4 in. Push X 3/4 in. D FPT Plastic Female Adapter
35.99 USD
EvoPEX is a push-to-connect PEX fitting designed for faster installation compared to traditional PEX rough-in plumbing methods. Requires no special tools, crimp, clamp, PEX rings, increasing productivity. Securely and permanently connect two pieces of PEX pipe together. Can be rotated after connected, and is ideal for working in tight spaces. Green visual indicator lets you know when PEX tubing is inserted to the proper depth
SharkBite Push to Connect 1 in. PTC each X 1 in. D PTC Brass Elbow
25.99 USD
The SharkBite Max 90-degree elbow offers an innovative push-to-connect design for quick and easy installation when connecting two pieces of potable water pipe. Ideal for working in tight spaces, the 90-degree brass push-to-connect elbow can be installed in wet lines with no special tools, crimping, soldering or glue required. Faster install time and ease of use reduces installation errors.
SharkBite Push to Connect 1-1/4 in. Brass 90 Degree Elbow
38.99 USD
Innovative push-to-connect design makes for quick and easy installation when connecting two pieces of potable water pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.
SharkBite 3/4 in. PEX X 3/4 in. D PEX Brass Elbow
54.99 USD
The SharkBite PEX Barb Fitting is an easy to install, low cost solution to connect PEX Tubing. SharkBite PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These PEX fittings may be used with the stainless steel clamping system or the copper crimp ring system both sold separately. The SharkBite PEX Barb fitting range offers a wide variety of Fittings, Manifolds, Valves, clamp rings, crimp rings and tools in various sizes to help complete your next plumbing project.
SharkBite 3/4 in. PEX Grade X 3/4 in. D MNPT Grade Brass Male Adapter
39.99 USD
Innovative push-to-connect design makes for quick and easy installation. Connect two pieces of PEX, copper, CPVC, PE-RT and/or HDPE pipe in any combination. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors. The SharkBite Connection System makes any plumbing project fast and easy thanks to unique push-to-connect technology. When you insert a pipe into a SharkBite quick-connect fitting, the fitting's stainless-steel teeth bite down and grip the pipe, while its special O-ring compresses to create a watertight seal.
SharkBite Push to Connect 1 in. IPS in. X 1 in. D IPS Brass Connector
26.99 USD
The SharkBite 1 in. Push-to-Connect PVC (Iron Pipe Size) x 1 in. Male Pipe Thread Adapter is the easiest way to transition from Female Pipe Thread into Iron Pipe Size PVC Pipe. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. The white collar side fits Sch. 40, 80, 120 PVC and also can be used on IPS CPVC Sch. 40 and Sch. 80 pipes. The male threaded end will fit any FNPT (Female National Pipe Thread) connection. Disassembly is just as fast using the SharkBite disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces.
SharkBite 3/4 in. MHT X 3/4 in. Push Brass Hose Bibb
20.99 USD
3/4 inches x 3/4 inches SharkBite 90 degree Multi Turn Hose Bibb is the easiest way to install a new or replacement hose bibb. The valve is perfect for potable water and hydronic applications where a shut-off is needed.
SharkBite Push to Connect 1-1/4 in. 1-1/4 in. D Female Connector
40.99 USD
Quick connect, no tools, soldering, clamping, unio
SharkBite EvoPEX 1/2 in. Push X 1/2 in. D Push Plastic Elbow
34.99 USD
SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX pipe as a holistic system. SharkBite EvoPEX fittings shall be installed on SharkBite PEX complying with ASTM F876 or CSA B137.5. The fittings shall be made of Engineered Polymer and be compliant with ASSE 1061 or CSA B125.3. The fittings shall be used in a potable water or radian.
SharkBite 3/4 in. D X 50 ft. L Polyethylene Tubing 160 psi
34.99 USD
SharkBite PEX is a cross-linked polyethylene tubing best suited for potable water supply application. PEX Pipe is durable, flexible and corrosion resistant. SharkBite PEX features a repeating SharkBite imprint pattern that provides a visual aid to help you determine whether the tube has been fully inserted when using the SharkBite push-fit fitting range. In addition to Potable Water Supply SharkBite PEX meets UL Standard for Plastic Piping in Fire Systems. Strong, flexible, corrosion-resistant pipe Flexibility reduces number of fittings needed to complete a job; reducing cost and leak points Can be installed wet or dry for immediate pressure testing SharkBite imprint pattern provides a visual aid to ensure pipe is fully inserted when using SharkBite push-to-connect fittings SharkBite system provides a variety of connection options, SharkBite PEX can be connected with SharkBite push-to-connect fittings or barbed fittings Listed to NSF 14 and CSA B137.5 for use in potable water systems Meets UL1821 standard for plastic piping for fire systems (3/4 in. and 1 in. only) Manufactured and tested to meet or exceed the requirements of the ASTM F-876/877/2023 and CSA B137.5
SharkBite 3/4 in. Barb X 3/4 in. D Barb Brass 90 Degree Elbow
28.99 USD
Connect two pieces of same-sized PEX pipe together using crimp or clamp rings. Certified for use in potable water and hydronic heating system applications.
SharkBite EvoPEX 3/4 in. Barb X 3/4 in. D Push Plastic Coupling
31.99 USD
SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX pipe as a holistic system. SharkBite EvoPEX fittings shall be installed on SharkBite PEX complying with ASTM F876 or CSA B137.5. The fittings shall be made of Engineered Polymer and be compliant with ASSE 1061 or CSA B125.3. The fittings shall be used in a potable water or radian.
SharkBite Stainless Steel Electric or Gas Water Heater Restraints 9 in.
23.99 USD
The straps are the most tested, approved, and recognized water heater restraints in the market. Strap series are independently lab-tested and meet and exceed code requirements for seismic safety.
SharkBite 3/4 in. PEX X 3/4 in. D PEX Tee
54.99 USD
The SharkBite barb connection system is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with DZR brass, the SharkBite barb fittings & valves are corrosion resistant.
SharkBite 3/4 in. PEX X 3/4 in. D PEX Stainless Steel Clamp Rings
44.99 USD
Connect two pieces of same-sized PEX pipe together using crimp or clamp rings. Certified for use in potable water and hydronic heating system applications.
SharkBite Push to Connect 1 in. PVC X 1 in. D PVC Brass Slip Tee
35.99 USD
The Shark Bite PVC Transition Slip Tee allows you to add a line into your existing plumbing system while converting from Copper (CTS) pipe to PVC pipe. The slip feature allows you to cut into an existing Copper or CPVC pipe and run out PVC Schedule 40, 80 or 120 from the Tee. The white collar center connection fits Schedule 40, 80, 120 PVC and also can be used on IPS CPVC Schedule 40 and 80 pipes. The tan collar ends fit CTS Copper, PEX, CPVC or PE-RT pipe. Simply insert the slip coupling onto the pipe and using the PVC depth gauge and disconnect clip to slip the fitting back onto the other end of pipe completing the connection.
SharkBite Push to Connect 3/4 in. PTC X 3/4 in. D PTC Brass Tank Tee
25.99 USD
The SharkBite 3/4 inch Push-to-Connect x 3/4 inch Push-to-Connect x 3/4 inch female NPT Slip Tee is used to connect copper and CPVC pipes. The Slip tee allows for the fitting to be inserted onto the pipe and then using the disconnect tool slipped back onto the other end of the pipe. This allows for up to a 2 inch section of the pipe to be removed and then repaired without having to add additional pipe. This slip tee is perfect for removing a section of pipe and adding in an expansion tank for your water heater, the FNPT Tee is threaded so you can screw in the expansion tank after installing the tee to the line.
SharkBite 3/4 in. Push X 1 in. D FIP 24 in. Stainless Steel Supply Line
26.99 USD
The SharkBite 3/4 inch Push-Fit x 1 inch FIP corrugated stainless steel water softener connector is the fastest way to connect your water softener to your plumbing system. Simply thread the 1 inch FIP Swivel nut onto the water softener unit and connect the 3/4 inch SharkBite end to Copper, PEX or CPVC pipe.
SharkBite Push to Connect 1 in. PTC each X 1 in. D PTC each Brass Slip Coupling
29.99 USD
SharkBite Max slip couplings are ideal for making quick repairs on pipe, the slip end is only compatible with copper. Using a single fitting, you can remove up to two inches of damaged pipe to make a repair, with the need for additional pipe or fittings. Max slip couplings are ideal for working in tight spaces and can be leveraged wherever repairs are needed.
SharkBite 1/2 in. Compression X 3/8 in. Compression Brass Dual Shut-Off Valve
35.99 USD
Used to control and shut off water flow to fixtures or appliances for maintenance and repair. Innovative design with 1/2 in. push-to-connect inlet makes for quick installation and quarter-turn, full-port brass ball valve makes for easy operation. Faster install time and ease of use reduces installation errors. Compatible with PEX, copper, CPVC and PE-RT SDR-9 HDPE pipe.
SharkBite EvoPEX 3/4 in. Push X 1/2 in. D Push Plastic Reducing Coupling
31.99 USD
SharkBite EvoPEX System is the first PEX ONLY push-to-connect rough-in plumbing solution designed to use without the need for additional tools and rings. It is engineered to improve efficiency and enable plumbing contractors to optimize install time with clean, leak-free installations unlike traditional crimp and expansion methods. Like traditional SharkBite Fittings, no special tools, soldering, glue or crimping to plumb an entire home, optimizing install time and efficiency. The systems ease of installation reduces the risk of install errors and potential leaks, just push onto PEX Pipe and check the green visual indicator to ensure a proper, leak-free connection. Its that simple. SharkBite EvoPEX Fittings are made from Acudel Plastic it provides toughness and chemical resistance along with excellent anti-decay stability and dimensional stability.
SharkBite 1/2 in. MNPT X 1/2 in. D MNPT Brass Connector
27.99 USD
The transition between PEX pipe and an MNPT threaded connection with a crimp or clamp connection. Certified for use in potable water and hydronic heating systems.
SharkBite 3/4 in. Male each X 3/4 in. D Male Brass Tee
59.99 USD
The SharkBite PEX/Barb Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
SharkBite EvoPEX 1/2 in. Barb X 1/2 in. D Push Plastic Coupling
25.99 USD
SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX pipe as a holistic system. SharkBite EvoPEX fittings shall be installed on SharkBite PEX complying with ASTM F876 or CSA B137.5. The fittings shall be made of Engineered Polymer and be compliant with ASSE 1061 or CSA B125.3. The fittings shall be used in a potable water or radian.SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX pipe as a holistic system. SharkBite EvoPEX fittings shall be installed on SharkBite PEX complying with ASTM F876 or CSA B137.5. The fittings shall be made of Engineered Polymer and be compliant with ASSE 1061 or CSA B125.3. The fittings shall be used in a potable water or radian.