Home > best products qlogic
qlogic: best products
![ThinkSystem QLogic QLE2772 32Gb 2-Port PCIe Fibre Channel Adapter]()
ThinkSystem QLogic QLE2772 32Gb 2-Port PCIe Fibre Channel Adapter
2539 USD
Maximum performance with up to 1 million input/output operations per second (IOPS) per port (2 million IOPS in a dual-port adapter) to support larger server virtualization deployments and scalable cloud initiatives, and performance to match new multicore processors, SSDs/flash storage, and faster server host bus architectures. Independent function, transmit and receive buffers, an on-chip CPU, DMA channels, and a firmware image for each port enable complete port-level isolation, prevent errors and firmware crashes from propagating across all ports, and provide predictable and scalable performance across all ports. Support for NVMe over Fibre Channel (FC-NVMe). The adapters support low-latency access to scale out NVMe with full support for the FC-NVMe protocol. The adapters can simultaneously support FC-NVMe and FCP-SCSI storage traffic on the same physical port, enabling customers to migrate to NVMe at their own pace. Support forward error correction (FEC) to enhance reliability of transmission and thereby performance. Industry-standard class-specific control (CS_CTL)-based frame prioritization Quality of Service (QoS) helps alleviate network congestion by prioritizing traffic for time-sensitive mission critical workloads for optimized performance. T10-PI data integrity with high performance offload provides end-to-end data corruption protection. Support for Message Signaled Interrupts eXtended (MSI-X) improves host utilization and enhances application performance. Fabric-assigned port worldwide name (FA-WWN) and fabric-based boot LUN discovery (F-BLD) pre-provisioning services allow servers to be quickly deployed, replaced, and moved across the SAN; the creation of zones, LUNs, and other services can be completed before the servers arrive on site. Using the Brocade ClearLink diagnostic port (D_Port) available on the Brocade Gen 5 switches, administrators can quickly run automated diagnostic tests to assess the health of links and fabric components. Read diagnostic parameters (RDP) feature provides detailed port, media, and optics diagnostics to easily discover and diagnose link-related errors and degrading conditions on any N_Port-to-F_Port link. Link cable beacon (LCB) enables administrators to visually identify both ends of a physical link by flashing HBA's LEDs, simplifying identification of the connection peers within server racks without tracing the cable. Single-pane-of-glass management across generations of QLogic FC adapters with QLogic QConvergeConsole (QCC). Deployment flexibility and integration with third-party management tools, including the VMware vCenter and Brocade Network Advisor. Support for 32 Gb, 16 Gb and 8 Gb FC devices. Comprehensive virtualization capabilities with support for N_Port ID Virtualization (NPIV). A common driver model allows a single driver to support all QLogic HBAs on a given OS. Reduce the number of cards, cables, and PCIe slots required. Exceptional performance per watt and price/performance ratios....
![ThinkSystem Qlogic QLE2770 32Gb 1-Port PCIe Fibre Channel Adapter]()
ThinkSystem Qlogic QLE2770 32Gb 1-Port PCIe Fibre Channel Adapter
1679 USD
Maximum performance with up to 1 million input/output operations per second (IOPS) per port (2 million IOPS in a dual-port adapter) to support larger server virtualization deployments and scalable cloud initiatives, and performance to match new multicore processors, SSDs/flash storage, and faster server host bus architectures. Independent function, transmit and receive buffers, an on-chip CPU, DMA channels, and a firmware image for each port enable complete port-level isolation, prevent errors and firmware crashes from propagating across all ports, and provide predictable and scalable performance across all ports. Support for NVMe over Fibre Channel (FC-NVMe). The adapters support low-latency access to scale out NVMe with full support for the FC-NVMe protocol. The adapters can simultaneously support FC-NVMe and FCP-SCSI storage traffic on the same physical port, enabling customers to migrate to NVMe at their own pace. Support forward error correction (FEC) to enhance reliability of transmission and thereby performance. Industry-standard class-specific control (CS_CTL)-based frame prioritization Quality of Service (QoS) helps alleviate network congestion by prioritizing traffic for time-sensitive mission critical workloads for optimized performance. T10-PI data integrity with high performance offload provides end-to-end data corruption protection. Support for Message Signaled Interrupts eXtended (MSI-X) improves host utilization and enhances application performance. Fabric-assigned port worldwide name (FA-WWN) and fabric-based boot LUN discovery (F-BLD) pre-provisioning services allow servers to be quickly deployed, replaced, and moved across the SAN; the creation of zones, LUNs, and other services can be completed before the servers arrive on site. Using the Brocade ClearLink diagnostic port (D_Port) available on the Brocade Gen 5 switches, administrators can quickly run automated diagnostic tests to assess the health of links and fabric components. Read diagnostic parameters (RDP) feature provides detailed port, media, and optics diagnostics to easily discover and diagnose link-related errors and degrading conditions on any N_Port-to-F_Port link. Link cable beacon (LCB) enables administrators to visually identify both ends of a physical link by flashing HBA's LEDs, simplifying identification of the connection peers within server racks without tracing the cable. Single-pane-of-glass management across generations of QLogic FC adapters with QLogic QConvergeConsole (QCC). Deployment flexibility and integration with third-party management tools, including the VMware vCenter and Brocade Network Advisor. Support for 32 Gb, 16 Gb and 8 Gb FC devices. Comprehensive virtualization capabilities with support for N_Port ID Virtualization (NPIV). A common driver model allows a single driver to support all QLogic HBAs on a given OS. Reduce the number of cards, cables, and PCIe slots required. Exceptional performance per watt and price/performance ratios....
![Synology Marvell QLE2692 Dual-Port PCIe 3.0 x8 16Gbps Fibre Ch Host Bus Adapter]()
Synology Marvell QLE2692 Dual-Port PCIe 3.0 x8 16Gbps Fibre Ch Host Bus Adapter
1099.99 USD
The Marvell QLogic QLE2692 dual-port Enhanced 16Gb FC (16GFC) HBAs boast industry-leading native FC performance with extremely low CPU usage and full hardware offloads.Enhanced 16GFCCompared to 16GFC, the Marvell QLogic Enhanced 16GFC solution offers higher per-port performance (up to 650K IOPS) with low power consumption. In addition, Marvell StorFusion technology delivers streamlined provisioning, QoS, and improved resiliency while addressing the needs of IT organizations that require reliability, integrated management, and guaranteed network performance. Enhanced 16GFC technology resolves data center complexities by enabling a storage network infrastructure that supports powerful virtualization features, application-aware services, and simplified management. The QLE2692 Adapter provide advanced storage networking features capable of supporting the most demanding virtualized and private cloud environments, while fully leveraging the capabilities of high-performance 16GFC and all-flash arrays (AFAs). Powerful management tools automate and simplify SAN provisioning to help reduce cost and complexity, while the unmatched 16GFC performance eliminates potential I/O bottlenecks in today's powerful multiprocessor, multicore servers.Superior PerformanceThe QLE2692 Adapter can accelerate mission-critical enterprise applications by delivering up to 1.3 million IOPS for physical, virtual, and private cloud environments. Marvell QLogic Adapter deliver the best storage application performance in virtualized and non-virtualized environments with support for up to 6,400MBps of aggregate throughput.NVMe Over Fibre Channel (FC-NVME)The QLE2692 Adapter support the FC-NVMe-2 (NVMe over Fibre Channel) protocol. The QLE2692 Adapter can simultaneously support FC-NVMe and FCP-SCSI storage traffic. NVMe storage offers exceptionally high performance at very low latencies. NVMe works best with a network that can provide lossless, low-latency, and high-performing transport. The 2600 Series Enhanced 16GFC Adapter bring the best of both worlds by offering the highest performance and lowest latency access to NVMe and SCSI storage over an FC network.Virtualization OptimizedThe QLE2692 Adapter support standards-based virtualization features. Under VMware ESXi 6.x and later, I/O requests and responses can be tagged with the virtual machine-ID (VM-ID) of the appropriate virtual machine, providing end-to-end visibility at the VM level. Support for N_Port ID virtualization (NPIV) enables a single FC adapter port to provide multiple virtual ports for increased network scalability. In addition, the 16GFC line rate per physical port delivers unmatched storage performance to maximize the number of VMs per physical server.Marvell StorFusion TechnologyMarvell QLogic Enhanced 16GFC Adapters, powered by StorFusion technology, include advanced capabilities that are enabled when deployed with supported Brocade and Cisco switches. By combining these...
![Q-Logic SANbox 5800]()
Q-Logic SANbox 5800
150 USD
QLogic SANbox 5800 in very good condition. Works great. Comes with power cables. Listing is for 1 unit, but I have 6 available. Ships FedEx Ground.
QLogic 16Gb Enhanced Gen5 FC Single-port HBA
1079 USD
Shop QLogic 16Gb Enhanced Gen5 FC Single-port HBA (01CV750) delivering maximum application performance on flash storage arrays.✓FAST DELIVERY.
ThinkSystem QLogic QLE2772 32Gb 2-Port PCIe Fibre Channel Adapter
2539 USD
Maximum performance with up to 1 million input/output operations per second (IOPS) per port (2 million IOPS in a dual-port adapter) to support larger server virtualization deployments and scalable cloud initiatives, and performance to match new multicore processors, SSDs/flash storage, and faster server host bus architectures. Independent function, transmit and receive buffers, an on-chip CPU, DMA channels, and a firmware image for each port enable complete port-level isolation, prevent errors and firmware crashes from propagating across all ports, and provide predictable and scalable performance across all ports. Support for NVMe over Fibre Channel (FC-NVMe). The adapters support low-latency access to scale out NVMe with full support for the FC-NVMe protocol. The adapters can simultaneously support FC-NVMe and FCP-SCSI storage traffic on the same physical port, enabling customers to migrate to NVMe at their own pace. Support forward error correction (FEC) to enhance reliability of transmission and thereby performance. Industry-standard class-specific control (CS_CTL)-based frame prioritization Quality of Service (QoS) helps alleviate network congestion by prioritizing traffic for time-sensitive mission critical workloads for optimized performance. T10-PI data integrity with high performance offload provides end-to-end data corruption protection. Support for Message Signaled Interrupts eXtended (MSI-X) improves host utilization and enhances application performance. Fabric-assigned port worldwide name (FA-WWN) and fabric-based boot LUN discovery (F-BLD) pre-provisioning services allow servers to be quickly deployed, replaced, and moved across the SAN; the creation of zones, LUNs, and other services can be completed before the servers arrive on site. Using the Brocade ClearLink diagnostic port (D_Port) available on the Brocade Gen 5 switches, administrators can quickly run automated diagnostic tests to assess the health of links and fabric components. Read diagnostic parameters (RDP) feature provides detailed port, media, and optics diagnostics to easily discover and diagnose link-related errors and degrading conditions on any N_Port-to-F_Port link. Link cable beacon (LCB) enables administrators to visually identify both ends of a physical link by flashing HBA's LEDs, simplifying identification of the connection peers within server racks without tracing the cable. Single-pane-of-glass management across generations of QLogic FC adapters with QLogic QConvergeConsole (QCC). Deployment flexibility and integration with third-party management tools, including the VMware vCenter and Brocade Network Advisor. Support for 32 Gb, 16 Gb and 8 Gb FC devices. Comprehensive virtualization capabilities with support for N_Port ID Virtualization (NPIV). A common driver model allows a single driver to support all QLogic HBAs on a given OS. Reduce the number of cards, cables, and PCIe slots required. Exceptional performance per watt and price/performance ratios....
Synology Marvell QLE2692 Dual-Port PCIe 3.0 x8 16Gbps Fibre Ch Host Bus Adapter
1099.99 USD
The Marvell QLogic QLE2692 dual-port Enhanced 16Gb FC (16GFC) HBAs boast industry-leading native FC performance with extremely low CPU usage and full hardware offloads.Enhanced 16GFCCompared to 16GFC, the Marvell QLogic Enhanced 16GFC solution offers higher per-port performance (up to 650K IOPS) with low power consumption. In addition, Marvell StorFusion technology delivers streamlined provisioning, QoS, and improved resiliency while addressing the needs of IT organizations that require reliability, integrated management, and guaranteed network performance. Enhanced 16GFC technology resolves data center complexities by enabling a storage network infrastructure that supports powerful virtualization features, application-aware services, and simplified management. The QLE2692 Adapter provide advanced storage networking features capable of supporting the most demanding virtualized and private cloud environments, while fully leveraging the capabilities of high-performance 16GFC and all-flash arrays (AFAs). Powerful management tools automate and simplify SAN provisioning to help reduce cost and complexity, while the unmatched 16GFC performance eliminates potential I/O bottlenecks in today's powerful multiprocessor, multicore servers.Superior PerformanceThe QLE2692 Adapter can accelerate mission-critical enterprise applications by delivering up to 1.3 million IOPS for physical, virtual, and private cloud environments. Marvell QLogic Adapter deliver the best storage application performance in virtualized and non-virtualized environments with support for up to 6,400MBps of aggregate throughput.NVMe Over Fibre Channel (FC-NVME)The QLE2692 Adapter support the FC-NVMe-2 (NVMe over Fibre Channel) protocol. The QLE2692 Adapter can simultaneously support FC-NVMe and FCP-SCSI storage traffic. NVMe storage offers exceptionally high performance at very low latencies. NVMe works best with a network that can provide lossless, low-latency, and high-performing transport. The 2600 Series Enhanced 16GFC Adapter bring the best of both worlds by offering the highest performance and lowest latency access to NVMe and SCSI storage over an FC network.Virtualization OptimizedThe QLE2692 Adapter support standards-based virtualization features. Under VMware ESXi 6.x and later, I/O requests and responses can be tagged with the virtual machine-ID (VM-ID) of the appropriate virtual machine, providing end-to-end visibility at the VM level. Support for N_Port ID virtualization (NPIV) enables a single FC adapter port to provide multiple virtual ports for increased network scalability. In addition, the 16GFC line rate per physical port delivers unmatched storage performance to maximize the number of VMs per physical server.Marvell StorFusion TechnologyMarvell QLogic Enhanced 16GFC Adapters, powered by StorFusion technology, include advanced capabilities that are enabled when deployed with supported Brocade and Cisco switches. By combining these...
Q-Logic SANbox 5800
150 USD
QLogic SANbox 5800 in very good condition. Works great. Comes with power cables. Listing is for 1 unit, but I have 6 available. Ships FedEx Ground.
