Home > best products jabsco
jabsco: best products
Jabsco 22610-9007 15 GPM Ballast King Bronze DC Pump with O-Switch brown
443.69 USD
Ballast King Bronze DC Pump without Switch - 15 GPM. The Ballast King is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 15 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty. Features Flow rate 15 US gallons/min (57 Litres/min) Self-priming from dry up to 1.2m (4ft) Adds approx 125lbs (56kgs) of ballast per minute Reversible to both fill and empty tanks Simple design means fewer wearing parts ISO 8846 MARINE (Ignition protection) Specifications Body Material: Bronze Impeller: Jabsco Neoprene Compound Seal: Lip Type Voltage: 12V Amp Draw: 19A Fuse Size: 25A Dimensions: 3.62" x 8" x 4.75" Weight: 8.6 lbs
Jabsco Q401J-115S-3A 12V 4 GPM 40 PSI Par-Max HD4 Heavy Duty Water Pressure Pump
232.74 USD
Par-Max HD4 Heavy Duty Water Pressure Pump - 12V - 4 GPM - 40 PSI. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Co-molded diaphragm technology for long life and durability. HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures. Efficient and quiet operation. Integrated, sealed pressure switch for on-demand operation. Features Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications PSI: 40 PSI GPM: 4 GPM Voltage: 12V Motor Design: Brushed, permanent magnet TENV Pumphead Upper Housing Material: Glass fiber reinforced polypropylene Diaphragm: Co-molded TPV Check Valves: EPDM Max Inlet Pressure: 30 PSI (2.1 Bar) Fluid Temperature Range: 32°F140°F (0°C60°C) Dry self-Priming Capability: 7ft min (2.13m/min) Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 Weight: 7.85 lbs