hillman: best products
HILLMAN 1/2 in. D X 4-1/2 in. L Steel Round Head Wedge Anchor 10 pk
22.99 USD
"The Power-Stud+ SD1 is a fully threaded, torque controlled, wedge expansion anchor that is designed for concrete applications. Suitable base materials are normal-weight and sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry. This anchor has various DOT approvals including Caltrans listing for ""Stud Mechanical Expansion Anchors"". Building code approved."
HILLMAN 1/2 in. D X 3 in. L Steel Hex Head Sleeve Anchors 12 pc
28.99 USD
Concrete Sleeve Anchors' design allows them to anchor into concrete, brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve, expanding and anchoring itself securely in the base material. Sleeve anchors have many uses including, but not limited to frame installations, electrical and mechanical attachments, and masonry applications.
HILLMAN 1/2 in. D X 1-1/2 in. L Heat Treated Zinc Steel Hex Head Cap Screw 50 pk
45.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill.
HILLMAN 1 in. D X 6 in. L Heat Treated Zinc Steel Hex Head Cap Screw 10 pk
107.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill.
HILLMAN 5/16 in. D X 5-1/2 in. L Heat Treated Zinc Steel Hex Head Cap Screw 50 pk
59.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN 3/8 in. D X 1-1/2 in. L Heat Treated Zinc Steel Hex Head Cap Screw 100 pk
47.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill.
HILLMAN 3/8 in. D X 1-3/4 in. L Heat Treated Zinc Steel Hex Head Cap Screw 50 pk
51.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN Screw-Bolt+ 1/2 in. D X 5 in. L Steel Hex Head Concrete Screw Anchor 10 pk
32.99 USD
Screw-Bolt+ anchors are a one-piece heavy duty screw anchor with a finished head designed for high strength anchoring. Parts have an attached washer with serrations under the head to secure the attachment. Design Improves speed and reduces effort for faster installation than traditional anchors.
HILLMAN 3/4 in. D X 7 in. L Heat Treated Zinc Steel Hex Head Cap Screw 1 pk
132.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill.
HILLMAN 3/4 in. D X 2-1/2 in. L Heat Treated Zinc Steel Hex Head Cap Screw 20 pk
59.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN Screw-Bolt+ 3/8 in. D X 4 in. L Steel Hex Head Concrete Screw Anchor 15 pk
27.99 USD
Screw-Bolt+ anchors are a one-piece, heavy duty screw anchor with a finished hex head. They are simple to install, easy to identify, and are fully removable. Screw-Bolt+ anchors are ICC code approved products and have versatility in different types of concrete and amp, masonry. These anchors are ideal for use in concrete construction, structural applications, racking, fences and amp, railings, drywall, glazing, and temporary applications such as scaffolding.
HILLMAN 5/8 in. D X 2-1/2 in. L Heat Treated Zinc Steel Hex Head Cap Screw 25 pk
47.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN 1/2 in. D X 4-1/2 in. L Heat Treated Zinc Steel Hex Head Cap Screw 25 pk
54.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN 1/2 in. D X 2 in. L Heat Treated Steel Hex Head Cap Screw 50 pk
74.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 8 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN M12-1.75 mm D X 35 mm L Heat Treated Steel Hex Head Cap Screw 30 pk
30.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these partially threaded, 8.8 grade metric screws anywhere a hex bolt may be used. Tighten with a wrench or a drill.
HILLMAN 1/4 in. X 1-1/2 in. L Hex Zinc-Plated Steel Lag Screw 100 pk
22.99 USD
Manufactured to be extremely sturdy, lag screws are some of the toughest fasteners. This Zinc Hex Lag Screws provides adequate corrosion and rust protection, making it a good choice for outdoor projects. Use this lag screw to attach objects to wood and anchor masonry. Common applications include retaining walls, deck frames, and outdoor play equipment. For masonry application, use the screw in conjunction with a lag shield. This zinc hex lag screw has coarse threads designed for pre-drilled holes to prevent splitting or snapping, and requires minimal clearance above the fastener. It has a hexagonal drive for simple installation and controlled traction with a socket or wrench. Use in a pre-drilled hole; see product package for pre-drilling instructions.
HILLMAN 3/8 in. X 6 in. L Hex Zinc-Plated Steel Lag Screw 50 pk
69.99 USD
Manufactured to be extremely sturdy, lag screws are some of the toughest fasteners. This Zinc Hex Lag Screws provides adequate corrosion and rust protection, making it a good choice for outdoor projects. Use this lag screw to attach objects to wood and anchor masonry. Common applications include retaining walls, deck frames, and outdoor play equipment. For masonry application, use the screw in conjunction with a lag shield. This zinc hex lag screw has coarse threads designed for pre-drilled holes to prevent splitting or snapping, and requires minimal clearance above the fastener. It has a hexagonal drive for simple installation and controlled traction with a socket or wrench. Use in a pre-drilled hole; see product package for pre-drilling instructions.
HILLMAN 1 in. D X 4 in. L Heat Treated Steel Hex Head Cap Screw 10 pk
122.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 8 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill.
HILLMAN 7/16 in. D X 2-1/2 in. L Heat Treated Steel Hex Head Cap Screw 50 pk
55.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 8 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN 3/8 in. D X 2-1/2 in. L Heat Treated Steel Hex Head Cap Screw 50 pk
49.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 8 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN 1/2 in. D X 1 1/2 in. L Metal Round Head Machine Screw Anchor 50 pk
108.99 USD
"Powers machine screw anchor 1/2""-13 is designed to set the anchor in a masonry base material. *"
HILLMAN M10-1.50 mm D X 25 mm L Heat Treated Steel Hex Head Cap Screw 1 pk
24.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these partially threaded, 8.8 grade metric screws anywhere a hex bolt may be used. Tighten with a wrench or a drill.
HILLMAN 1/4 in. D X 2-1/2 in. L Heat Treated Steel Hex Head Cap Screw 100 pk
50.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 8 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN M8-1.25 mm D X 45 mm L Heat Treated Steel Hex Head Cap Screw 1 pk
25.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these partially threaded, 8.8 grade metric screws anywhere a hex bolt may be used. Tighten with a wrench or a drill.
HILLMAN 5/16 in. D X 2-1/2 in. L Heat Treated Steel Hex Head Cap Screw 100 pk
54.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 8 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN 1/2 in. D X 5 in. L Heat Treated Steel Hex Head Cap Screw 25 pk
73.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 8 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN 9/16 in. D X 2 in. L Heat Treated Steel Hex Head Cap Screw 25 pk
53.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 8 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN 1/4 in. X 1-1/2 in. L Hex Stainless Steel Lag Screw 50 pk
41.99 USD
Manufactured to be extremely sturdy, lag screws are some of the toughest fasteners. This Stainless Steel Hex Lag Screws offers a higher level of corrosion resistance, and is great for any outdoor project. Use this lag screw to attach objects to wood and concrete. Common applications include retaining walls, deck frames, and outdoor play equipment. When used in conjunction with a lag shield, this screw can also be used in masonry applications. This screw has coarse threads with a hexagonal drive. Its BEST-IN-CLASS CORROSION PROTECTION: Stainless steel finish combines a polished look with superior protection against rust and corrosion and makes it slightly stronger than regular (un-hardened) steel bolts. Use this screw in a pre-drilled hole; see product package for pre-drilling instructions.
HILLMAN 5/8 in. D X 2 in. L Heat Treated Steel Hex Head Cap Screw 25 pk
59.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 8 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN 5/8 in. X 2-1/2 in. L Hex Zinc-Plated Steel Lag Screw 25 pk
46.99 USD
Manufactured to be extremely sturdy, lag screws are some of the toughest fasteners. This Zinc Hex Lag Screws provides adequate corrosion and rust protection, making it a good choice for outdoor projects. Use this lag screw to attach objects to wood and anchor masonry. Common applications include retaining walls, deck frames, and outdoor play equipment. For masonry application, use the screw in conjunction with a lag shield. This zinc hex lag screw has coarse threads designed for pre-drilled holes to prevent splitting or snapping, and requires minimal clearance above the fastener. It has a hexagonal drive for simple installation and controlled traction with a socket or wrench. Use in a pre-drilled hole, see product package for pre-drilling instructions.
HILLMAN Power Pro No. 8 in. X 1-3/4 in. L Bronze Star Flat Head Premium Deck Screws 5 lb 803 pk
45.99 USD
Power Pro Premium Exterior Wood Screws are designed for deck building and exterior wood projects. These exterior wood screws are engineered to make fastening solutions easier and reduce call-backs. The unique thread design and self-starting tip help to provide faster engagement into wood, less wood splitting than standard wood screws and a 30 percentage faster installation time from start to finish. The star drive increases the number of contact points to virtually eliminate cam-out during installation. Countersinking blades clean out wood debris and enable a clean and secure finish, while the no-split twist shank reduces the likelihood of splitting wood. Hillmans patented Bore-Fast thread drives 30 percentage faster without pre-drilling.
HILLMAN Screw-Bolt+ 1/2 in. D X 2-1/2 in. L Steel Hex Head Concrete Screw Anchor 10 pk
22.99 USD
Screw-Bolt+ anchors are a one-piece heavy duty screw anchor with a finished head designed for high strength anchoring. These anchors are removable and reusable for more convenience and value. Design Improves speed and reduces effort for faster installation than traditional anchors.
HILLMAN 1/4 in. D X 2-1/4 in. L Heat Treated Zinc Steel Hex Head Cap Screw 100 pk
30.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN 1/4 in. D X 1 in. L Heat Treated Zinc Steel Hex Head Cap Screw 100 pk
22.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN 1/2 in. D X 12 in. L Heat Treated Zinc Steel Hex Head Cap Screw 25 pk
138.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill.
HILLMAN 5/16 in. D X 3 in. L Heat Treated Zinc Steel Hex Head Cap Screw 100 pk
59.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN 3/8 in. D X 2-1/4 in. L Heat Treated Zinc Steel Hex Head Cap Screw 50 pk
30.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill.
HILLMAN 1/2 in. D X 5-1/2 in. L Heat Treated Zinc Steel Hex Head Cap Screw 25 pk
61.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN 5/8 in. D X 5 in. L Heat Treated Zinc Steel Hex Head Cap Screw 25 pk
81.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *