Acehardware.com: Hardware ironmongery
The Best
Simpson Strong-Tie ZMax 3.13 in. H X 5.5 in. W 12 Ga. Galvanized Steel Post Base
64.99 USD
The Simpson Strong-Tie ABU is designed to attach wooden posts to existing concrete in high capacity applications. The built-in 1-in. standoff of this adjustable post base helps to prevent rot at the end of the post. The ABU has a slotted anchor hole in the base for adjustability and attaches to the post with nails, Strong-Drive SD Connector screws or bolts. This versatile post base makes a cost-effective option for securing a post to the foundation, with a design built for maximum uplift performance. *
Top
Simpson Strong-Tie Strong-Drive No. 5 Sizes X 4 in. L Star Low Profile Head Bold Structural Screws
41.99 USD
The Simpson Strong-Tie Strong-Drive SDWS Timber screw is designed to provide an easy-to-install, high-strength alternative to through-bolting and traditional lag screws. This screw is ideal for the contractor and do-it-yourselfer alike. It is code listed in IAPMO UES ER-192 and meets IRC and IBC code requirements for most common wood framing applications. The double-barrier coating provides corrosion resistance equivalent to hot-dip galvanization, making it suitable for certain exterior and preservative-treated wood applications, as described in the evaluation report.
Excellent
Simpson Strong-Tie 6 in. H X 6 in. W 7 Ga. Galvanized Steel Column Base
44.99 USD
The CB is designed to connect posts to concrete foundations for a wide range of lumber, glulam, and engineered wood product sizes. This column base is either cast-in-place or wet set into the concrete where the bottom of the base plate sits flush with the concrete for full post bearing. The CB is ideal for columns that require high structural values and rugged performance.
Recommended
FastenMaster TimberLOK No. 10 X 6 in. L Hex Epoxy Coarse Wood Screws 50 pk
52.99 USD
Save time, money and labor costs TimberLok sharp point and aggressive threads penetrate the densest woods without pre-drilling and provide stronger shear values than 3/8 inch galvanized lag screws. TimberLok unique countersinking head design is perfect for your next wood-to-wood project whether it be deck framing, fencing or any post to beam connections. It's also perfect for replacing galvanized spikes in raised flower beds, landscaping or retaining walls. No need to predrill and sledge a spike. TimberLok just zips right in 6 inch TimberLok can also be used as a code compliant replacement for hurricane ties in rafter to top place and truss to top plate applications. Simply drive the 6 inch TimberLok at a 22-1/2 degree angle below the double top plate up into the center of the rafter. This can be done when over or between wall studs. The fastener head will countersink to secure the rafter to the double top plate. Please refer to Fasten Masters website for application specific information regarding this connection.
Featured
Squeeeeek No More No. 8 X 3 in. L Square Bugle Head Coarse Screw Kit
26.99 USD
This Squeek No More kit quickly and permanently stops annoying floor squeaks. Works for hardwood, vinyl and carpet. Installation bit, special screws, alignment and depth control fixture for carpeted floors, hardwood floor fixture, joist finders and instructions in kit.
Alternative
FastenMaster TimberLok 8 in. L Hex E-Coat Coarse Structural Wood Screws 50 pk
62.99 USD
TimberLOK is a heavy duty wood screw available in a variety of lengths and packaging sizes for applications such as landscape timbers, fences, decks, headers, stair stringers, attaching rafter or trusses to the top plate. TimberLOK is guaranteed not to rust or corrode for the life of the project. The coating on this fastener has been tested in wood treatment chemicals and found to provide equivalent protection to code-approved hot-dipped galvanized coatings.
Schlage Encode Aged Bronze Metal Wi-Fi Deadbolt
289.99 USD
Schlage Encode Smart WiFi Deadbolt offers peace of mind from anywhere by allowing you to remotely manage your lock via the Schlage Home app or Key by Amazon app. There's no need to purchase an extra accessory/hub to connect to your lock from anywhere it will connect to your home’s Wi-Fi signal similar to your laptop, making it easy and intuitive to use. Graded best in security, durability and finish by industry experts, Schlage Encode Smart WiFi Deadbolt offers the advanced features of secure encryption and built-in alarm technology. This innovative smart deadbolt is available in a variety of styles and finishes that pair perfectly with Schlage interior door hardware, creating a cohesive look throughout the home.
Schlage Aged Bronze Steel Electronic Deadbolt
129.99 USD
This Camelot keypad deadbolt offers keyless access and provides maximum security. Install and program in minutes with no wiring required. Schlage has built a legacy of providing the highest level of security to homes and businesses. Install a Schlage and you install nearly a century of total dedication to security, quality and innovation.
Schlage Satin Nickel Steel Electronic Deadbolt
129.99 USD
Keypad deadbolts offer keyless access and provide maximum security protection to make your life more convenient. Install and program in minutes with no wiring required. No more keys to hide, lose, carry or forget.
Schlage Satin Nickel Steel Electronic Keypad Entry Lock
149.99 USD
The Schlage Camelot satin nickel accent keypad lever is pre-programmed to allow up to 19 user codes and can be easily installed. With this electronic keypad house keys are no longer needed. The keypad has a low battery indicator and runs on a single 9-volt battery, which is included.
HILLMAN 1/2 in. D X 3 in. L Steel Hex Head Sleeve Anchors 12 pc
28.99 USD
Concrete Sleeve Anchors' design allows them to anchor into concrete, brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve, expanding and anchoring itself securely in the base material. Sleeve anchors have many uses including, but not limited to frame installations, electrical and mechanical attachments, and masonry applications.
Master Lock Steel Indoor Security Bar
34.99 USD
The Master Lock No. 270D Folding Door Security Bar is made of rugged 20-gauge steel construction to resist forced entry through doors and sliding patio doors. The Folding Door Security Bar is the only adjustable door bar on the market designed to offer both robust strength and compact storage and portability - making it convenient to take with you on the go. The quick-release design unfolds and adjusts to a variety of lengths to add an additional layer of protection to most standard doors. The padded rubber foot holds strong on most floor surfaces without scratching or damage. The flexible handle strap allows for easy storage when not in use. The Limited Lifetime Warranty provides peace of mind from a brand you can trust.
Kwikset Satin Nickel Metal Deadbolt
23.99 USD
The Kwikset 96600-869 is from the 660 Series a single-cylinder deadbolt that combines basic security with convenient functionality. Equipped with Smart Key re-key technology, it allows you to re-key the lock in seconds without removing it. The design supports easy installation, making it a practical choice for exterior residential doors needing reliable, Grade 3 security.
HILLMAN Power Pro No. 8 in. X 1-3/4 in. L Bronze Star Flat Head Premium Deck Screws 5 lb 803 pk
45.99 USD
Power Pro Premium Exterior Wood Screws are designed for deck building and exterior wood projects. These exterior wood screws are engineered to make fastening solutions easier and reduce call-backs. The unique thread design and self-starting tip help to provide faster engagement into wood, less wood splitting than standard wood screws and a 30 percentage faster installation time from start to finish. The star drive increases the number of contact points to virtually eliminate cam-out during installation. Countersinking blades clean out wood debris and enable a clean and secure finish, while the no-split twist shank reduces the likelihood of splitting wood. Hillmans patented Bore-Fast thread drives 30 percentage faster without pre-drilling.
HILLMAN Screw-Bolt+ 1/2 in. D X 4 in. L Steel Hex Head Concrete Screw Anchor 10 pk
29.99 USD
Screw-Bolt+ anchors are a one-piece, heavy-duty screw anchor with a finished hex head. The patented thread design offers toughened threads for tapping high strength concrete. They are simple to install, easy to identify and are fully removable. Screw-Bolt+ anchors are ICC code approved products and have versatility in different types of concrete and amp, masonry. These anchors are ideal for use in concrete construction, structural applications, racking, fences and railings, drywall, glazing and temporary applications such as scaffolding.
HILLMAN Screw-Bolt+ 1/2 in. D X 2-1/2 in. L Steel Hex Head Concrete Screw Anchor 10 pk
22.99 USD
Screw-Bolt+ anchors are a one-piece heavy duty screw anchor with a finished head designed for high strength anchoring. These anchors are removable and reusable for more convenience and value. Design Improves speed and reduces effort for faster installation than traditional anchors.
HILLMAN Screw-Bolt+ 1/2 in. D X 5 in. L Steel Hex Head Concrete Screw Anchor 10 pk
32.99 USD
Screw-Bolt+ anchors are a one-piece heavy duty screw anchor with a finished head designed for high strength anchoring. Parts have an attached washer with serrations under the head to secure the attachment. Design Improves speed and reduces effort for faster installation than traditional anchors.
HILLMAN Screw-Bolt+ 3/8 in. D X 2-1/2 in. L Steel Hex Head Concrete Screw Anchor 15 pk
20.99 USD
Screw-Bolt+ anchors are a one-piece, heavy duty screw anchor with a finished hex head. They are simple to install, easy to identify, and are fully removable. Screw-Bolt+ anchors are ICC code approved products and have versatility in different types of concrete and amp, masonry. These anchors are ideal for use in concrete construction, structural applications, racking, fences and amp, railings, drywall, glazing, and temporary applications such as scaffolding.
Hardware ironmongery Acehardware.com best products
HILLMAN Screw-Bolt+ 1/2 in. D X 3 in. L Steel Hex Head Concrete Screw Anchor 10 pk
26.99 USD
Screw-Bolt+ anchors are a one-piece, heavy-duty screw anchor with a finished hex head. The patented thread design offers toughened threads for tapping high strength concrete. They are simple to install, easy to identify and are fully removable. Screw-Bolt+ anchors are ICC code approved products and have versatility in different types of concrete and amp, masonry. These anchors are ideal for use in concrete construction, structural applications, racking, fences and railings, drywall, glazing and temporary applications such as scaffolding.
HILLMAN 5/16 in. X 1 in. L Hex Zinc-Plated Steel Lag Screw 100 pk
23.99 USD
Manufactured to be extremely sturdy, lag screws are some of the toughest fasteners. This Zinc Hex Lag Screws provides adequate corrosion and rust protection, making it a good choice for outdoor projects. Use this lag screw to attach objects to wood and anchor masonry. Common applications include retaining walls, deck frames, and outdoor play equipment. For masonry application, use the screw in conjunction with a lag shield. This zinc hex lag screw has coarse threads designed for pre-drilled holes to prevent splitting or snapping, and requires minimal clearance above the fastener. It has a hexagonal drive for simple installation and controlled traction with a socket or wrench. Use in a pre-drilled hole; see product package for pre-drilling instructions.
HILLMAN 5/16 in. X 1 in. L Hex Hot Dipped Galvanized Steel Lag Screw 100 pk
30.99 USD
Manufactured to be extremely sturdy, lag screws are some of the toughest fasteners. Galvanized hex lag screws provide superior weather and corrosion protection, making them ideal for outdoor projects.
HILLMAN Tapper 3/16 in. D X 1.75 in. L Steel Hex Head Concrete Screw Anchor 100 pk
24.99 USD
Tapper Concrete Screw Anchors are manufactured for top performance in masonry-based applications.
HILLMAN 5/16 in. X 1-1/4 in. L Hex Zinc-Plated Steel Lag Screw 100 pk
28.99 USD
Manufactured to be extremely sturdy, lag screws are some of the toughest fasteners. This Zinc Hex Lag Screws provides adequate corrosion and rust protection, making it a good choice for outdoor projects. Use this lag screw to attach objects to wood and anchor masonry. Common applications include retaining walls, deck frames, and outdoor play equipment. For masonry application, use the screw in conjunction with a lag shield. This zinc hex lag screw has coarse threads designed for pre-drilled holes to prevent splitting or snapping, and requires minimal clearance above the fastener. It has a hexagonal drive for simple installation and controlled traction with a socket or wrench. Use in a pre-drilled hole; see product package for pre-drilling instructions.
HILLMAN 5/16 in. X 2-1/2 in. L Hex Zinc-Plated Steel Lag Screw 100 pk
46.99 USD
Manufactured to be extremely sturdy, lag screws are some of the toughest fasteners. This Zinc Hex Lag Screws provides adequate corrosion and rust protection, making it a good choice for outdoor projects. Use this lag screw to attach objects to wood and anchor masonry. Common applications include retaining walls, deck frames, and outdoor play equipment. For masonry application, use the screw in conjunction with a lag shield. This zinc hex lag screw has coarse threads designed for pre-drilled holes to prevent splitting or snapping, and requires minimal clearance above the fastener. It has a hexagonal drive for simple installation and controlled traction with a socket or wrench. Use in a pre-drilled hole; see product package for pre-drilling instructions.
HILLMAN 5/16 in. X 1-1/2 in. L Hex Zinc-Plated Steel Lag Screw 100 pk
34.99 USD
Manufactured to be extremely sturdy, lag screws are some of the toughest fasteners. This Zinc Hex Lag Screws provides adequate corrosion and rust protection, making it a good choice for outdoor projects. Use this lag screw to attach objects to wood and anchor masonry. Common applications include retaining walls, deck frames, and outdoor play equipment. For masonry application, use the screw in conjunction with a lag shield. This zinc hex lag screw has coarse threads designed for pre-drilled holes to prevent splitting or snapping, and requires minimal clearance above the fastener. It has a hexagonal drive for simple installation and controlled traction with a socket or wrench. Use in a pre-drilled hole; see product package for pre-drilling instructions.
HILLMAN Screw-Bolt+ 3/8 in. D X 3 in. L Steel Hex Head Concrete Screw Anchor 15 pk
24.99 USD
Screw-Bolt+ anchors are a one-piece heavy duty screw anchor with a finished head designed for high strength anchoring. Parts have an attached washer with serrations under the head to secure the attachment. Design Improves speed and reduces effort for faster installation than traditional anchors.
HILLMAN Tapper 3/16 in. D X 1.25 in. L Steel Hex Head Concrete Screw Anchor 100 pk
21.99 USD
Tapper Concrete Screw Anchors are manufactured for top performance in masonry-based applications.
HILLMAN Screw-Bolt+ 3/8 in. D X 4 in. L Steel Hex Head Concrete Screw Anchor 15 pk
27.99 USD
Screw-Bolt+ anchors are a one-piece, heavy duty screw anchor with a finished hex head. They are simple to install, easy to identify, and are fully removable. Screw-Bolt+ anchors are ICC code approved products and have versatility in different types of concrete and amp, masonry. These anchors are ideal for use in concrete construction, structural applications, racking, fences and amp, railings, drywall, glazing, and temporary applications such as scaffolding.
HILLMAN 5/16 in. X 1-1/2 in. L Hex Hot Dipped Galvanized Steel Lag Screw 100 pk
39.99 USD
Manufactured to be extremely sturdy, lag screws are some of the toughest fasteners. This Galvanized Hex Lag Screws provides superior weather and corrosion protection, making it ideal for outdoor projects. Use this lag screw to attach objects to wood. Common applications include retaining walls, deck frames, and outdoor play equipment. When used with a lag shield, this screw can also be used for masonry application. This galvanized hex lag screw has coarse threads with a hexagonal drive, and requires clearance above the fastener. The screw has a galvanized finish which contains more corrosion resistant properties, allowing it to last longer than those made with traditional steel. Use in a pre-drilled hole; see product package for pre-drilling instructions.
HILLMAN 5/16 in. X 2-1/2 in. L Hex Hot Dipped Galvanized Steel Lag Screw 100 pk
54.99 USD
Manufactured to be extremely sturdy, lag screws are some of the toughest fasteners. This Galvanized Hex Lag Screws provides superior weather and corrosion protection, making it ideal for outdoor projects. Use this lag screw to attach objects to wood. Common applications include retaining walls, deck frames, and outdoor play equipment. When used with a lag shield, this screw can also be used for masonry application. This galvanized hex lag screw has coarse threads with a hexagonal drive, and requires clearance above the fastener. The screw has a galvanized finish which contains more corrosion resistant properties, allowing it to last longer than those made with traditional steel. Use in a pre-drilled hole; see product package for pre-drilling instructions.
HILLMAN 5/16 in. D X 1/2 in. L Heat Treated Zinc Steel Hex Head Cap Screw 100 pk
22.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN 5/16 in. X 4-1/2 in. L Hex Hot Dipped Galvanized Steel Lag Screw 50 pk
49.99 USD
Manufactured to be extremely sturdy, lag screws are some of the toughest fasteners. Galvanized hex lag screws provide superior weather and corrosion protection, making them ideal for outdoor projects.
HILLMAN Tapper 3/16 in. D X 3.75 in. L Steel Hex Head Concrete Screw Anchor 100 pk
44.99 USD
Tapper Concrete Screw Anchors are manufactured for top performance in masonry-based applications.
HILLMAN 5/16 in. D X 1-1/4 in. L Heat Treated Zinc Steel Hex Head Cap Screw 100 pk
29.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill.
HILLMAN Tapper 1/4 in. D X 1.75 in. L Carbon Steel Hex Head Concrete Screw Anchor 100 pk
30.99 USD
Tapper Concrete Screw Anchors are manufactured for top performance in masonry-based applications.
HILLMAN Tapper 3/16 in. D X 2.75 in. L Steel Hex Head Concrete Screw Anchor 100 pk
28.99 USD
Tapper Concrete Screw Anchors are manufactured for top performance in masonry-based applications.
HILLMAN 5/16 in. D X 4-1/2 in. L Heat Treated Zinc Steel Hex Head Cap Screw 50 pk
50.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN 5/16 in. D X 1 in. L Metal Pan Head Machine Screw Anchor 50 pk
72.99 USD
Powers machine screw anchor 5/16-18 is designed to set the anchor in a masonry base material. *
HILLMAN 5/16 in. D X 1 in. L Heat Treated Zinc Steel Hex Head Cap Screw 100 pk
26.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill. *
HILLMAN 5/16 in. D X 1 in. L Heat Treated Zinc Steel Hex Head Cap Screw 100 pk
31.99 USD
Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 5 partially threaded screws anywhere a hex bolt may be used. Tighten with a wrench or a drill.